Recent content by daguy80

fenix-store
  1. D

    Which smaller light running on A or AA has the biggest WOW factor?

    I have a Xeno E03 and have always wonder how a 14505 3 volt lithium primary AA would be like. I have used Nimh and 14500's but never tried a 14505. I was just wondering how the output is compared to a Nimh and 14500 rechargeable. Runtime?
  2. D

    looking for a xm-l pocket thrower

    I would say the Dereelight dbs with nailbender xml dropin for one 18650 battery. It my be a little bigger but throw is about 25 k lux with a xml.
  3. D

    Tiablo a9

    I think thats a great choice because if you don't like the beam or want more light, you can just upgrade the pill will a xml and it will be a fantastic thrower and will very bright spill.
  4. D

    Brightest AAA keychain light

    I am looking for the brightest in terms of lumens wise keychain light that runs off of a single AAA nimh battery. Most of the lights that I have seen are all around the 70 lumen mark. Is there any available that is brighter up to 120 or more lumens. I don't really care about runtime too much...
  5. D

    Tiablo a9

    I don't think the difference would be that much between the Q5 and R2. I have the Q5 and the throw is amazing. I don't have a light meter but in my eyes it seems to out throw my DBS with a R2 driven at 1.2 amp. I am still puzzled at why my A9 seems to out throw the DBS especially given that...
  6. D

    Decided on Dereelight DBS V3 - but which one: XML or XP-G R5???

    I have a thrunite xpg pill driven at 1.5 amp a xre r2 driven at 1.2 amp and a nailbender xml dropin driven.at 2.4 amp and the xml out throws both of them. I don't know why but my xre r2 could only throw about the same as my xpg pill. I would imagine a nailbender xml driven at 3.1 amp would be...
  7. D

    Smallest 25K Lux, 500+ OTF lumen multi mode light?

    I have a Dereelight DBS with a nailbender xm-l dropin and it is very bright. I would say easily over 500+ lumens and the throw would be close to 25k lux. It out throws my Tiablo A9 which is around 20k lux and also a lot brighter spill with the xm-l DBS. I cant find anything else that small...
  8. D

    Direct drive Cree XM-L questions

    Yes I would be very interested in that. Can you also do a discharge diagram for 4 eneloops at 3 amps also. Thanks.
  9. D

    Direct drive Cree XM-L questions

    Thanks for helping in clarifying what Vf meant. I was under the impresion that if Vf for a xm-l was 3.3 volts at 3 amp then if my power source/batteries supplied 3.3 volts then the led would be driven at 3 amps. I measured the current again when the batteries were half discharged and I got 2.5...
  10. D

    Design flaws? The LED in flashlights

    I have the same dropin, how does it improve the beam?
  11. D

    Review Trustfire X6 SST-90 OUTDOOR BEAM SHOTS ADDED

    Re: Review Trustfire X6 SST-90 Lots O Pic's Can you do beamshots with the dereelight xml? Does it have the dereelight 2.5 amp driven pill or is it a different pill? I also have a dereelight with the nailbender xml pill and was wondering if you can test out the lux meter on you the dbs xml.
  12. D

    Direct drive Cree XM-L questions

    I was just planning on making a homemade led lantern and have been messing around with the direct driving the xm-l led. I used 4 eneloop nimh batteries totaling 5.6 volts. I measured 3.3 amps of current going to the led. Is this too much for the xm-l led to handle? I know that the xm-l is...
  13. D

    Lights that can use p60 style pills not the whole drop-in.

    I think you guys are misunderstanding what I am asking so let me try to clear it up a little more. I already have a solarforce l2 p60 host. I am not looking for a p60 host. The p60 dropins come with the pill and then the reflector. The pill is screwed into the reflector. The DBS has a...
  14. D

    Lights that can use p60 style pills not the whole drop-in.

    Any lights that would allow me to just screw in the pill like the Dereelight DBS. I think modding might me to hard for me to do because I don't have the proper tools.
  15. D

    How to figure out runtime based on current draw

    Thanks for the help.
See more

Latest posts

Top