Recent content by Inkidu

fenix-store
  1. I

    Sold/Expired WTB: Convoy S2+ Triple

    I see what you mean. But, I wasn't sure it wasn't a machine mark. I would think there would be some solder showing. You had me curious enough to see what Richard used. Also, why he used and S3. They normally have a shelf, which he must of drilled out. He might have had an excess of them in stock...
  2. I

    Sold/Expired WTB: Convoy S2+ Triple

    Do you know if this is one piece or two? I can't really tell and it is the first one I looked at first hand. It is out of a Mountain Electronics "S3" "S3" EDC Flashlight V3 - Triple LED - 18650 - S3 EDC Driver: H17F - 3A + DD - Ful.. - Carclo Lens: 10507 - S3 EDC LED: Nichia 219C -...
  3. I

    Need mounting board for 10 Epitex SMB680-680-1100-I leds

    Thank for the relpy. It wil be expensive popcorn @ $10 a "pop" I ordered a XHP70 solder paste stencil to increase my chances for a good reflow. It is not a great fit A little crooked This is on a 12v board. I will be using a 6v board, which I don't have yet. Will try to scrap some of the silk...
  4. I

    Need mounting board for 10 Epitex SMB680-680-1100-I leds

    I still have (10) of these. Epitex SMB680-680-1100-I leds I finally found a mbpcb that might work. Looking at the solder pattern of a XHP70 (page 28) (6v board) and the solder pattern on page 1 I think it might work??? 4 years now and maybe I will get moving on this project. Any tips on...
  5. I

    Need mounting board for 10 Epitex SMB680-680-1100-I leds

    Hello, I just came across these 10 leds still in the sealed foil. I forgot that I ever had them. I was hung up by not having the boards, and the company was not so interested in selling small orders. I bought them as a sample order. Here is a pdf file of the exact led board dimensions...
  6. I

    Sold/Expired WTB: P60 Drop In with Nichia UV 365 NM LED

    There is now a new Gen 2 Led Engin with twice the power available from mouser (bare emitter) http://www.ledengin.com/files/products/LZ1/LZ1-00UV00.pdf
  7. I

    Sold/Expired WTB: P60 Drop In with Nichia UV 365 NM LED

    You might try to also ask for a Led Engin uv led. They are becoming more powerful. They also are readily available in small numbers and on smaller boards. They just came out with more powerful one ( I have the older one) I used one with a buck boost driver (ebay Ti chip) in a P60 with...
  8. I

    Sold/Expired I WANT TO BUY, AN VERY GOOD EDC NEUTRAL WITH TRITIUM

    +1 My two cents If you don't mind the bulk the 18650 size battery continues to be upgraded and available. Hope this helps.
  9. I

    My custom pineapple!!!

    Ti gold looks great with burnt bronze. It would be nice if someone did a run of the S-9 tailcaps rings, with Ti gold,so I could have a hard finish gold color on both ends of my burnt bornze torch. I have been looking for a close area (Pittsburgh) for Ti coating but bothering people about small...
  10. I

    Sold/Expired Cerakote Service *Run 3 Open!* Get your lights coated by a NIS certified applicator!

    I received my burnt bronze torch today. Thanks
  11. I

    5.6a driver?

    IMO most high amp (>3 amp / 10 watts) p60 dropins, except the very best designed and have a large surface area head, are essentially impractical in most situations. My own very well designed 3 amp P60 becomes hot after a short period of time. Hope this helps.
  12. I

    UV LED's for sterilization???

    The pdf link didn't work for me for the 278nm uv led so I thought I would post it again. Anyone know the usual length between a press release and the actual availability for this company. Might be a DARPA hard problem. Any help would be appreciated.
  13. I

    Can someone help with empty Solarforce Masterpiece Pro-1 drop-ins?

    The thread design seems to have some benefits i.e. replace ability, and maximizes the surface area for heat transfer. In the case of the Masterpiece Pro-1 the area where the pill meets the body is exactly where the body fins are located. I kind of like the idea that instead of making up the...
  14. I

    Are there masterpiece pro-1 pill replacements? IR interested

    The first general question is, does Solarforce offer a standalone replacement pill for the head? I assume there just isn't anything that can replace a XP-E very well with the stock reflector. Just a newbie but the accurate throw is something to behold. The second general question pertains to...
  15. I

    How to build a high output UV flashlight?

    Welcome to the site. I made a P60 dropin with a Ledengin uv 365nm led The led is impressive and is as advertised i.e. a true 365nm led Sometimes you can't tell it is on. I bought several blank boards from overseas if you feel like doing your own diy P60 I can supply a blank mounting board...
See more

Latest posts

Top