Recent content by KrisP

fenix-store
  1. K

    Sold/Expired P60 modules -warm, neutral, cool white/XRE-XPE-XPG-S2-XML-U2 / NICHIA 92CRI (part 10)

    Hi Dave, PayPal sent for a Nichia 219 4500k 92CRI neutral 3 level high / med / low 2.8-6 volts with memory / 1.4 amp OP Reflector / potted International postage Transaction ID: 8BY188119J536864E Thank You, Kris.
  2. K

    DIY - 17.5 MCP to H4 55w HID host conversion

    If you're referring to the HID kit, just search eBay for "55W HID H4 4300K" and you'll find various priced kits, we just bought the cheapest.
  3. K

    Yaa i finally got a Warm white Led lantern

    Thanks for the pics. What part number is that Seoul LED?
  4. K

    Maglite 6D to Q5 Terralux

    How's the beam? I've found Crees don't work very well in standard Mag reflectors :(
  5. K

    Australian source for HID at last

    The filament on a H4 globe is at a different height to the arc on a H4 based D2S globe (the standard HID kit type). M@elstrom and I both put a HID kit into a spotlight that was focused with a H4 globe but very unfocused with the HID kit until spaced back to the correct focal point. Your pics...
  6. K

    Australian source for HID at last

    I'd like to see the unfocused beam shots too :)
  7. K

    Australian source for HID at last

    Thank you very much for the offer, but it's ok :) I'll get around to it eventually.
  8. K

    Australian source for HID at last

    Unfortunately, I haven't even finished the one that we shared the HID kit for... I haven't had the time or patience to create the spacer for the globe so it's sitting around in pieces still :(
  9. K

    Australian source for HID at last

    The filament/arc on the HID globe and H4 globe are different distances from the base of the globe so the H4 based HID globe needs to be spaced back to get the same focus as a normal H4 globe. H3 globe and HID globes have a very similar distance from the base to the arc/filament.
  10. K

    Red Sky in The Morning...

    Taken in Hastings, Victoria, Australia.
  11. K

    Color rendition beamshots: incan, GD, Rebel, Nichia 083, Seoul high CRI, and Cree 5A

    Re: Color rendition beamshots: incan, GD, Rebel, Nichia 083 (high CRI), Seoul high CR Flouro lights can have a CRI of 70 up to 95 depending on the type. Standard flouro is 70, triphosphor around 84, and full spectrum around 95 according to this document on page 4.
  12. K

    Color rendition beamshots: incan, GD, Rebel, Nichia 083, Seoul high CRI, and Cree 5A

    Re: Color rendition beamshots: incan, GD, Rebel, Nichia 083 (high CRI), Seoul high CR I'm not sure where mudman is getting his from but you can get them from this module.
  13. K

    Color rendition beamshots: incan, GD, Rebel, Nichia 083, Seoul high CRI, and Cree 5A

    Re: Color rendition beamshots: incan, GD, Rebel, Nichia 083 (high CRI), Seoul high CR May I ask what part number the Seoul LED is and where you sourced it? Thanks :)
  14. K

    Fenix TK20: Is the Hype in the Light?

    I'd rather not say who I ordered it from, but they're not interested in taking any responsibility for it not arriving :mecry: I have ordered from Torchworld before and due the the poor Aussie dollar, I think I'll be going back to them next time. [Edit - And suddenly a full refund is issued...
  15. K

    Fenix TK20: Is the Hype in the Light?

    I hate reading this thread... I ordered mine in August and it still hasn't arrived and doubt it ever will :( I guess I'll have to order another one when I can afford it! :broke:
See more

Latest posts

Top