joniverson
Newly Enlightened
- Joined
- Jul 21, 2007
- Messages
- 31
I have a silver Leadlight clone, but not exactly like a usual Leadlight. When I did the simple pot mod, there was a green glue holding the pot in place which broke loose when I turned the pot, but I thought continued to interfere so I removed the pot completely. Now, the laser starts off very bright, as before, but dims slightly after a couple of seconds. It's difficult to see the dimming, but it definitely happens and then levels off. Sometimes though, it will brighten back up and sometimes not. Is there any way I can get around this and have the laser more stable as when I first did the pot mod? The batteries, being lithiums, seem fine and I tested them in an identical laser and there was no dimming. The dimming is very slight and hard to notice unless looking at the beam at an angle (the beam becomes harder to see) or looking at a slightly dimming reflection from a light colored wall.
Thanks,
Jon
Thanks,
Jon