- New LED manufacturer in Silicon Valley
- (neutral) XP-E vs XP-C or XP-G in quad P60
- soldering my own led strips need help
- where to get EZ900 XR-E R2
- XM-L at low drive currents
- SST-90 Binning - Part numbers etc
- The details of LED technology?
- Bridgelux 2600lumen LED DLP Projector mod
- quick question on UV diodes
- How to wire l.e.ds to chase, flash, fade etc?
- Bare LED chip white light hot as hell, normal? And some LED questions
- automatic switchoff led when strobe is flashing
- New to LED lighting - Need help Please......
- Cree says XP-G @140lm/w
- Driver For 5 or more Cree XM-L Led's
- Correlation between Vf and lumens?
- Very warm 1900K leds?
- LED bar graph/lcd display help
- E12 base LED with MORE than 2-3watts
- step-up for multiple LEDs
- color mixing white and Blue LED's for custom colors
- Help Needed to Make or find a Royal Blue Drop-in (what parts and what to do)
- XM-L tint
- Here's a led with a Continuous Spectrum from 400 nm to 750 nm
- Then and now, color and emitter evolution
- What high power LED to use for this random waterproof driver I have in a dive light?
- 3x rebel leds: driver question
- Lynk Labs demonstrates warm-on-dim AC-LED technology
- Luxeon K2 LEDs
- Replacement IR LED for Icemaker Control board
- XM-L bin / driver question.
- Bridgelux LED reflectors
- Expected led run time (if possible)
- The P7 is Dead???
- LED recommendations to replace two 18W Biax Lamps in a Lightbox
- Invisible Cloak
- Best source of "Night-Vision Green" LEDs?
- LED converts heat into light,efficiency >200%!
- Brightest light strip available?
- Bridgelux LED driver
- How to evenly distribute 12v power to 6 LED's?
- How to make sure if led is cree?
- LED Forward Voltage VS Junction temp relationship
- Most efficient LED of any colour by radiant flux
- LEDs that run on AC and DC?
- Need help with lumens, candela, view angles of LEDs
- MFP. Design Project - need advice for variable intensity, dual color lighting source!
- 30 LED array single resistor?
- Powering two Philips 10W LED Bulbs?
- How to wire a blue LED light to 2 AA batteries?