
Calendar| May 2013 | ||||||
|---|---|---|---|---|---|---|
| Su | Mo | Tu | We | Th | Fr | Sa |
| 1 | 2 | 3 | 4 | |||
| 5 | 6 | 7 | 8 | 9 | 10 | 11 |
| 12 | 13 | 14 | 15 | 16 | 17 | 18 |
| 19 | 20 | 21 | 22 | 23 | 24 | 25 |
| 26 | 27 | 28 | 29 | 30 | 31 | |
Ok, so here are a few things that I think kids today don't really know much about or have never experienced. (for the most part) L.P. records Rotary dial phones Cars with carburetors Floppy...
Last Post By: Monocrom Today, 12:42 PM
Recent Forum PostsOk just used an online LED series parallel array wizard here http://led.linear1.org/led.wiz
Seems the 5v supply suggested (http://dx.com/p/50w-led-driver-circu...v-2300ma-42805
The coppers of 2013.
Copper 6P body from FiveMega
Copper Cryos Bezel from ronac
Copper Fatter Tail from JasonH
Copper
The lesson seems to be to carry a cheap loaner in addition to your good light.
WilsonCQB1911 Today, 10:29 PM
[COLOR="#0000FF"]Lets end all the negative posts which aren't really helpful, I've asked the OP to put some thought into what his/her requirements
Norm Today, 10:29 PM
It's the intensity of the light (lux or cd) that will hurt your eyes, not the lumens. I can stare all day at my ~ 1000 lumen lightbulb in my livingroom.
jorn Today, 10:23 PM
Your first image is oversize, when you post an image please remember Rule #3
Rule #3 If you post an image in your post, please downsize
I know its all a bit confusing.
There is two possibly three generations of L4. First gen was all flood (wall of light) and used the same
Would cerakote negate the cooling effect of these copper hosts?
Bullyson Today, 10:10 PM
If i recall correctly, the gen 3 maxabeams are rated at 12 million candela and 1500 lumens, gen 2 maxabeams have been measured at between 1.7million (by
yifu Today, 10:09 PM
Rees, I think your parts will arrive within 3 weeks.
herculaneum79 Today, 10:05 PM


Do you at times feel as though you’re the “Thread Killer”?
Thread Starter: AZPopsYou know the last one to make a post in a thread and no one relies after your post! .... Yup, sometimes I feel that I'm the "Thread Killer"!
Last Post By: Chauncey Gardiner Today, 08:01 PM