DFiorentino
Flashlight Enthusiast
Some of my "special" lights...(updated 8/28/06) *lots 'o pics*
Just thought I would share some of the lights I consider "special". Modest collection, but it's still growing
-DF
Plain Ti...
Left: TB CR2 Kroll tube, Morelite A1 head and bezel
Middle: McLuxTi-PD w/SX0H luxI
Right: McGizmo switch, 1x123 tube and bezel, TB A18 head
TB 2x18650 tube, Z41, Ti C-adapter, SRTH
Arc goodness...(L->R)
- The light that started it all for me...LSH-P
- swirled red/violet LSH
- Arc 4+
- R/O first run with CR2 twitsty
- first run with Flupic and 123 twisty
- 2AA Kroll, 123 Kroll, slim 1AA twisty, CR2 twisty
'X' marks the spot with these TnC lights
- orange/black splash ano SF proto #13 w/X4T (Thanks Eric!)
- black HA XY0S SF-18650 (now w/BBH)
A3 anyone...(L->R)
- black A3, Balrog 1x18650 tube, McTC switch SOLD
- My same nickel A3 as below, but what's that Ti bezel doing on there? :naughty:
- blue/black marbled A3, 2x123 flare tube, SFT switch
- red/black splash A3, 1x17500 tube, trim switch
- bare naked A3, CR2 tube, standard switch
(L->R)
- laser engraved A1, 1x123 tube, standard switch with tritium in the tail (Thanks Geoff and Suzy! )
- plain old black A2, 1x123 tube, FT switch SOLD
- red/gold swirl A19, 1x123 tube, FT switch
- blue/silver McLuxIII-PD (yep, this was the black one in the pic below)
- red/black fade A19, TB 123 Kroll tube
special MiniMags (L->R)
- #18 blue/violet yaesumofo MM
- #20 red/white/gold yaesumofo MM
- #18 blue/violet yaesumofo MM
- red/cocobolo MM
- gray/ebony MM
- black/silver splattered and grooved MM
Left: double headed DSpeck custom; white CMG on one end KL1 w/UX1L and McR-18 on the other
Right: Just an aluminum Gatlight w/UY0K
The big boys...(L->R)
- Cyclops/Thor modded to 35W HID
- HF modded to 35W HID
- Supernova...king of throw!
- Barn Burner...king of lumens!
The "Torch", burnin' down da house.
Front: KT1 head, TranquillityBase's AWESOME 2x18650 tube and C-adapter, SW02, WX0S Arc Mania tower module :rock:
Back: FM chrome tri-bore 2D (XX1S in hand, just need a MaxFlex and copper o-sink. )
Its a Maxlite folks. Take a good look because this will probably be the last picture with it in its original condition. :naughty:
Front: XX1T HD45 SOLD
Back: MiniHID courtesy of Mac, HA3 coutesy of wtraymond
Top: Red 2D Mag w/G2FH R/O LuxIII on an o-sink, 2p DB700 (1.4A), FM6AA-2D, UCL
Bottom: Purple 2C Mag w/Cree UV on an o-sink, NG350 & UCL-LDF
All hail the 27LT... :bow: The Ti bezel makes it look all perty and whatnot
The "Mutt" - G&P 5W Mini-Turbohead (LuxV replaced with a WW0T)/6P body/LH Detonator extender/Z41 2-stage (15ohm) tailcap running on (2) 17500's
Just a plain USL :sigh: ........ :nana:
Just a "regular" black McLuxIII-PD. You know the drill...Ti bezel, Ti clip, soon to even more special OLD PIC
Jets22 TiN Aleph 2 w/Std. switch
Left: Nickel plated Aleph 3 Host w/SFT switch
Right: chrome McLuxIII-PD w/UY0J driven at non-standard levels
Left: Neoca Wood w/NG750 TW0J
Center: Brass Neoca BL w/NG400 TW0J
Right: Brass FireFlyII CR2 host
Front: Brass FireFlyII CR123 host
Just thought I would share some of the lights I consider "special". Modest collection, but it's still growing
-DF
Plain Ti...
Left: TB CR2 Kroll tube, Morelite A1 head and bezel
Middle: McLuxTi-PD w/SX0H luxI
Right: McGizmo switch, 1x123 tube and bezel, TB A18 head
TB 2x18650 tube, Z41, Ti C-adapter, SRTH
Arc goodness...(L->R)
- The light that started it all for me...LSH-P
- swirled red/violet LSH
- Arc 4+
- R/O first run with CR2 twitsty
- first run with Flupic and 123 twisty
- 2AA Kroll, 123 Kroll, slim 1AA twisty, CR2 twisty
'X' marks the spot with these TnC lights
- orange/black splash ano SF proto #13 w/X4T (Thanks Eric!)
- black HA XY0S SF-18650 (now w/BBH)
A3 anyone...(L->R)
- black A3, Balrog 1x18650 tube, McTC switch SOLD
- My same nickel A3 as below, but what's that Ti bezel doing on there? :naughty:
- blue/black marbled A3, 2x123 flare tube, SFT switch
- red/black splash A3, 1x17500 tube, trim switch
- bare naked A3, CR2 tube, standard switch
(L->R)
- laser engraved A1, 1x123 tube, standard switch with tritium in the tail (Thanks Geoff and Suzy! )
- plain old black A2, 1x123 tube, FT switch SOLD
- red/gold swirl A19, 1x123 tube, FT switch
- blue/silver McLuxIII-PD (yep, this was the black one in the pic below)
- red/black fade A19, TB 123 Kroll tube
special MiniMags (L->R)
- #18 blue/violet yaesumofo MM
- #20 red/white/gold yaesumofo MM
- #18 blue/violet yaesumofo MM
- red/cocobolo MM
- gray/ebony MM
- black/silver splattered and grooved MM
Left: double headed DSpeck custom; white CMG on one end KL1 w/UX1L and McR-18 on the other
Right: Just an aluminum Gatlight w/UY0K
The big boys...(L->R)
- Cyclops/Thor modded to 35W HID
- HF modded to 35W HID
- Supernova...king of throw!
- Barn Burner...king of lumens!
The "Torch", burnin' down da house.
Front: KT1 head, TranquillityBase's AWESOME 2x18650 tube and C-adapter, SW02, WX0S Arc Mania tower module :rock:
Back: FM chrome tri-bore 2D (XX1S in hand, just need a MaxFlex and copper o-sink. )
Its a Maxlite folks. Take a good look because this will probably be the last picture with it in its original condition. :naughty:
Front: XX1T HD45 SOLD
Back: MiniHID courtesy of Mac, HA3 coutesy of wtraymond
Top: Red 2D Mag w/G2FH R/O LuxIII on an o-sink, 2p DB700 (1.4A), FM6AA-2D, UCL
Bottom: Purple 2C Mag w/Cree UV on an o-sink, NG350 & UCL-LDF
All hail the 27LT... :bow: The Ti bezel makes it look all perty and whatnot
The "Mutt" - G&P 5W Mini-Turbohead (LuxV replaced with a WW0T)/6P body/LH Detonator extender/Z41 2-stage (15ohm) tailcap running on (2) 17500's
Just a plain USL :sigh: ........ :nana:
Just a "regular" black McLuxIII-PD. You know the drill...Ti bezel, Ti clip, soon to even more special OLD PIC
Jets22 TiN Aleph 2 w/Std. switch
Left: Nickel plated Aleph 3 Host w/SFT switch
Right: chrome McLuxIII-PD w/UY0J driven at non-standard levels
Left: Neoca Wood w/NG750 TW0J
Center: Brass Neoca BL w/NG400 TW0J
Right: Brass FireFlyII CR2 host
Front: Brass FireFlyII CR123 host
Last edited: