Sold/Expired Feeler Sub 1D Mag LED "U" Bin Flupic powered

Any interest in the Following

-Mag Sub D Body
-Tri-Bored
-UCL Lens
-Tailswitch
-1.2 amp Burst FluPic board
-"U" Bin Emmiter
-Glow powder coated O-Sink post
-3x17500 powered Premium FiveMega Holder (3300Mah with Protected cells)
-Runtime should be around 3 hours on High many hours on the lower settings


Flupic Example of mode 4

-Low (User Settable)
-High (User Settable)
-Burst 1.2amp
-Strobe
-SOS


Pricing would be around $200

A cheaper option would be single 18650 powered at around $40 cheaper.

Pictures of an 18650 version though both would externally be indentical.





Compared to a Stock 2D



Glow Powder around Pedestal




As for Brightness it makes my over achieving U2 and SFIII look like Dorcy AA Lights


Mac





Mac

Yes
:rock:

Interest for single 18650 in C cell light.Single level with no flupic.Can it be done?

Andy

I'll take one! Sign me up!

MEGA Interested if it was a Trilux or Quad

CroMAGnet said:

MEGA Interested if it was a Trilux or Quad

Click to expand...

Nope


Mac

Pics added.

Mac

I'm interested.Can you take a beamshot?

Stock reflector?

this project looks ideal for single D li-ion cell...

wow... single D li ion...

cool runtime

but i wonder if we can get them and the charger for it...

russtang said:

I'm interested.Can you take a beamshot?

Stock reflector?

Click to expand...

Yes the stock reflector.

Here is a "U" bin in a Mag at 1.2amp




A Surefire G2 with 5 watt drop in module

Of course I'm interested. Why is the 1x18650 cheaper -- doesn't have to be tri-bored? What's the run time/output with the 18650?

More good work, Mac.

Leef said:

Of course I'm interested. Why is the 1x18650 cheaper -- doesn't have to be tri-bored? What's the run time/output with the 18650?

More good work, Mac.

Click to expand...

It's cheaper as it doesn't have to be Tri-Bored and no need for a holder. The output with the single 18650 is the same. Runtime is slightly less but still well over 2 hours in high. Of course for 90% of it's use I think you wont be using high so say at a 500ma drive level 4 hours with a single 18650 is do-able.

With 3x17500's you have 3300Mah of capacity
With a single 18650 you have 2200mah



Mac

Are the converters the same? That is, with the tri-bored tube, can one use either 1x18650 or 3x17650 -- at the same output?

Same conveters 4.2v input.

The lights will not be interchangeable with battery configutations.


Mac

I'd be interested

List me!

18650 is VERY tempting!!!!!

So...Any updates? Is there enough interest?

cryhavok said:

So...Any updates? Is there enough interest?

Click to expand...

i second that! i would be interested in a 18650 -- pewter.

what would be the estimated lumen output on this?