Any interest in the Following
-Mag Sub D Body
-Tri-Bored
-UCL Lens
-Tailswitch
-1.2 amp Burst FluPic board
-"U" Bin Emmiter
-Glow powder coated O-Sink post
-3x17500 powered Premium FiveMega Holder (3300Mah with Protected cells)
-Runtime should be around 3 hours on High many hours on the lower settings
Flupic Example of mode 4
-Low (User Settable)
-High (User Settable)
-Burst 1.2amp
-Strobe
-SOS
Pricing would be around $200
A cheaper option would be single 18650 powered at around $40 cheaper.
Pictures of an 18650 version though both would externally be indentical.
Compared to a Stock 2D
Glow Powder around Pedestal
As for Brightness it makes my over achieving U2 and SFIII look like Dorcy AA Lights
Mac
Mac
-Mag Sub D Body
-Tri-Bored
-UCL Lens
-Tailswitch
-1.2 amp Burst FluPic board
-"U" Bin Emmiter
-Glow powder coated O-Sink post
-3x17500 powered Premium FiveMega Holder (3300Mah with Protected cells)
-Runtime should be around 3 hours on High many hours on the lower settings
Flupic Example of mode 4
-Low (User Settable)
-High (User Settable)
-Burst 1.2amp
-Strobe
-SOS
Pricing would be around $200
A cheaper option would be single 18650 powered at around $40 cheaper.
Pictures of an 18650 version though both would externally be indentical.
Compared to a Stock 2D
Glow Powder around Pedestal
As for Brightness it makes my over achieving U2 and SFIII look like Dorcy AA Lights
Mac
Mac
Last edited: