The purpose of this thread will be to state your interest in the future offerings of the Titanium A1 heads.
This list is for the A1 head and smooth bezel ring only.
As I make more of them I will contact those that are on the interest list.
For those that haven't seen them, this is what they look like
and this was the sales thread for the first two batches: Ti A1 heads
The parts needed to complete these heads are;
29.3mm window (lens) (I use a 1mm think sapphire one with the Ti bezel rings)
Aleph 1 retaining ring or 27mm bezel ring
Aleph Light Engine of your choice or you can build your own with an E-screw, E-screw can, emitter PCB, LED emitter and converter of your choice.
These are the same parts used to complete any stanard Aleph 1 head. Keep in mind that some of these parts are getting a little harder to find. The Shoppe had most of them available in the past, but I see now that some are no longer listed. Please make sure you have them or can get them if you want to complete this head to use on your Aleph bodies or E-series tubes.
Thank You, Dwayne