MiniMag mod Lux V?

[GarageBoy]

Is there a way I can get DD LUX V in a MiniMag? I need a way to mount the LED and sink the heat. Thanks

[greenLED]

I've had one in my list for a long time: DB500, 2xAA li-ions, custom heatsink (in the works), McR20, UCL.

[GarageBoy]

I'm thinking of figuring out how to get a heat sink

[greenLED]

I'm thinking of figuring out how to get a heat sink

See zelda's solution.

[rscanady]

I've had one in my list for a long time: DB500, 2xAA li-ions, custom heatsink (in the works), McR20, UCL.

This shopping list looks very familiar, haha.

Waiting here also, oh yea, still need the mini mag (been waiting a LONG while on those). When will I ever learn about pre-paying.


Ryan

[chesterqw]

wow.. now if we have copper and willing to use 1xaa, we can use the space available to make the heatsink bigger

and who needs the twist off function? we will use a kroll tailcap to turn it off.

[GarageBoy]

I NEED the extra 3.7 V!

BTW: what was the original current draw of the Space Needle?

[andrewwynn]

DD is not feasible with 2xLiON.. you can resistor or use an LDO or buck driver.. a nice example is here

=awr

[Christoph]

pressed in copper sink

Chris

[greenLED]

what are specs on that puppy, Christoph?

Rscanady, you putting it into a splash ano minimag, then?

[rscanady]

yes, if we get them! hahah

Ryan

[Christoph]

That was a Txxx running @700-750ma NG iirc.The cu was about .4" thick,pressed in place.I have a LuxV on an old MM with a BB500ma driven from either 2Xaa or 1 li-ion aa or 14670 with an al sink pressed in it does not get very warm at all.

C