lukestephens777
Enlightened
Have just purchased an Inova T3 light. Have bought a ten pack of CR123A primaries, however is there a way i can use rechargeable 123's in this light? I have read a lot of posts about RCR123's. But am still confused. I know RCR123's have have a voltage of 4.2 V off the charger but drop to 3.6 V under load. The T3 uses two 123's which are 3.0 V each. If i used two rechargeable's i would have a voltage of 7.2 V under load. Would this ruin the light? Or affect longevity of the LED.
Also i have read about another type of Lithium that has a voltage of 3.6 but drops to 3.2 V under load maybe that would be suitable?
I know this probably all sounds confusing, cause it is!! ha!
If anyone could help me out that would be great, or if anyone knows good quality protected RCR123's and a good charger they could recommend that would be great too!!
Thanks very much
Also i have read about another type of Lithium that has a voltage of 3.6 but drops to 3.2 V under load maybe that would be suitable?
I know this probably all sounds confusing, cause it is!! ha!
If anyone could help me out that would be great, or if anyone knows good quality protected RCR123's and a good charger they could recommend that would be great too!!
Thanks very much