I'm selling some bare aluminum TnC SF-Series parts and lights. To attempt to make these sales easier and to prevent clogging CPF with a bunch of photos I've listed the items on the new TnC Products store for custom lights/parts. However as can be the case in trying to make things easier, the opposite may occur so please be patient. Please post questions, special requests, and follow up with orders in this thread or on TnC Forums.
Soon I will have a specifications and explanation thread for the TnC SF-Series lights on TnC Forums where I can sticky the thread. In brief these lights are E series tail compatible to use your favorite tail cap. The current power packs allow the use of the TnC SF 20mm head with McR-20 reflector, the 27mm TnC SF head with the McR 27L reflector, and with the three VIP heads, including the 3" BBH for the ultimate in throw. Future power packs will be built to accommodate further head configurations. There will soon be released a small run of power packs to fit the Aleph heads, however these will not work with the Aleph LEs, rather they will work with the TnC canisters as shown below.
Below you see the E series TnC SF tail, 18650 tube, power pack, canister holding the converter and emitter which is reverse threaded into the power pack, and the 20mm head w/bezel. Missing from the photo are the o-rings, reflector, lens and tail cap assembly. These tail caps are available as a clicky with the Mclicky switch and rubber boot, or as a single stage twisty.
Below is a 20mm TnC SF light with a 18650 tube and a short (protruding switch/boot) tail cap.
Below are the available tube sizes: CR2, CR123, 18500, AA and 18650. There are canisters available to nicely drive LEDs on AA batteries.
TnC SF-Series lights come in limited quantities of bare aluminum, black HA and Natural HA. Below is a NAT 27mm TnC SF head with the 27L reflector.
Cree and Seoul as well as other custom builds of the canisters are available as well.