TnC SF-Series parts/lights and the new TnC online store

[Bogus1]

I've restocked these cansiters:

TnC Canister USV0H SSC 400mA Buck/Boost 1.2v - 9v Max

TnC Canister USV0H SSC LED 350mA Boost MJ Driver

I've added this new cansiter:

TnC Canister USW0H SSC 400mA Buck/Boost 1.2v - 9v Max

[Bogus1]

I've restocked the following item:

TnC 14mm Canisters (empty) [Cree]

I've added these new items:

TnC Canister USV0H SSC LED and Flupic Driver 1amp burst

TnC Canister R2 WG tint Cree LED and flupic driver

[Bogus1]

I've added the following items to the store:

TnC C-Flex 1x C battery tube with clicky [HA-Black]

TnC C-Flex 1x C battery tube extender [HA-Black]

TnC C-Flex 1x C battery tube extender [HA-Natural]

TnC C-Flex SF-Series Series Head Adaptor [HA-Blackl]

TnC C-Flex E Series and Aleph Head Adaptor [HA-Black]

TnC C-Flex C Series Head Adaptor [HA-Black]

TnC C-Flex Lioncub/chamelion/Dragon Adaptor [HA-Black]

[Bogus1]

I’ve restocked the following items:

MC123 1-Cell Extender (HA-Black)

TnC E2C E series Surefire tube to C Series Head Adaptor [HA-NAT]

Flupic converter version 2.2 Standard Sammie 0.55"

Flupic converter version 2.2 Standard Sammie 0.55" 1amp burst

Flupic converter with Low>High>Burst and adjust high level

Piglet 50/500mA multi level/function buck/boost 0.55" driver

Tri-Flupic driver for 3 LEDs independantly [standard UI] 0.77"

TnC Canister R2 WG tint Cree LED and flupic driver

TnC Canister R2 WH tint Cree LED and FLuPIC w/simple program

TnC 14mm Canister Key

I’ve added these new items:

MC123 1-Cell Extender (HA-NAT)

TnC E2C E series Surefire tube to C Series Head Adaptor [Black]

TnC E Series compatible AA integrated tube/clicky tail [Bare Al]

[Bogus1]

I've restocked TnC 14mm Canisters (empty) [Luxeon or Seoul]

I've added TnC E Series compatible CR123 tube/clicky tail [Bare Al]

[Bogus1]

I've restocked Tri-Flupic driver for 3 LEDs independantly [standard UI] 0.77"

[Bogus1]

I've restocked just a few of the following parts:

Flupic converter version 2.2 Standard Sammie 0.55"

Flupic converter version 2.2 Standard Sammie 0.55" 1amp burst

[Bullzeyebill]

I've restocked just a few of the following parts:

Flupic converter version 2.2 Standard Sammie 0.55"

Flupic converter version 2.2 Standard Sammie 0.55" 1amp burst

Nice to see that goldserve has also been busy.

Bill

[Bogus1]

I've added the following item:

TnC Maxlite AA E Series compatible tube [Black-HA]

I've restocked the following items:

McClicky switch fits TnC SF-Series, Aleph, and McGizmo tail caps

Rubber Switch Boot fits TnC SF-Series & Aleph tail Caps

[Bogus1]

I've listed the last one of these:

TnC prototype (HA-Natural) 38mm E Series head with fins

[Bogus1]

I've stocked the following new items:

TnC 14mm Canisters (empty) NEW! K2 TFFC

TnC 14mm Canisters (empty) NEW! [Cree/Luxeon/Seoul]

Flupic converter with Hi/burst>User Set>Low with 800ms, DD burst

Piglet 150/800mA multi level/function buck/boost 0.55" driver

I've restocked the following items:

Flupic converter version 2.2 Standard Sammie 0.55"

Flupic converter version 2.2 Standard Sammie 0.55" 1amp burst

Tri-Flupic driver for 3 LEDs independantly [standard UI] 0.77"

[Bogus1]

I’ve stocked the following new item:

TnC E2C E series tube to C Series Head Adaptor [HA Olive-Drab]

I’ve restocked the following items:

McR-27L McGizmo 27mm reflector for Luxeon and Seoul LEDs
TnC E2C E series Surefire tube to C Series Head Adaptor [Black]

[Bogus1]

Please note: I will be leaving for 10-12 days beginning 8/6. I may or may not be able to ship the morning of 8/6 but I will be shipping 8/4 and 8/5. Thanks

I’ve stocked the following new items:

TnC Canister R2 WC tint Cree LED and FLuPIC driver

TnC Canister US2W0H SSC 400mA Buck/Boost 1.2v - 9v Max

TnC Canister US2W0H SSC LED 350mA Boost MJ Driver

TnC Canister US2W0H SSC LED 750mA MJ SDC 3v-6v

[Bogus1]

I’ve stocked the following new items:

Tri-Flupic driver 0.77" Low>High>Burst and adjust high level

Tri-Flupic driver for 3 LEDs independently [custom Bogus1] 0.77"

Mini-FLuPIC 10.5mm with program High>User Set Level>Low

[Bogus1]

I’ve restocked the following items:

Flupic converter with Hi/burst>User Set>Low with 800ms, DD burst

Tri-Flupic driver for 3 LEDs independently [standard UI] 0.77"

[Gary123]

Don't know where to post my question.

Is a P7 pill available for the SF light?

Thanks,

Gary

[Bogus1]

Don't know where to post my question.

Is a P7 pill available for the SF light?

Thanks,

Gary

Hi Gary,

I'm sorry I missed your post somehow a long time ago! Anyhow we don't have P7 canisters for the SF-Series, however we might be able to set you up with a P7 adaptor for the C-Flex. I'll send you a PM.

[Bogus1]

I've stocked the following new item:

FLuPIC 0.77" converter for Arc/Q3s with standard program

I've restocked the following items:

Flupic converter version 2.2 Standard Sammie 0.55"

Flupic converter with Hi/burst>User Set>Low with 800ms, DD burst

[yazkaz]

Thought Goldserve stopped making Flupics long ago so how come new stock shows up here? Maybe he started making those boards again but how come we heard nothing about him here?

[Bogus1]

Thought Goldserve stopped making Flupics long ago so how come new stock shows up here? Maybe he started making those boards again but how come we heard nothing about him here?

It's probably been a couple years since Goldserve stopped selling FLuPICs himself but he's kept making them for me so they could still be available. This was mentioned in his thread(s) and perhaps again in my FLuPIC thread.

[Icarus]

Hi Eric,

Any updates on the two-stage clicky/twisty tailcap for the KeyLux AA light?
My KeyLux is desperately waiting to get completed...


Freddy

[jch79]

It's probably been a couple years since Goldserve stopped selling FLuPICs himself but he's kept making them for me so they could still be available. This was mentioned in his thread(s) and perhaps again in my FLuPIC thread.

Eric,
What about asking Kevin for a 1.2-1.6v driver, for a single NiMH driver? I think he did one a loooong time ago, but only made a few.
That'd ROCK!
Thanks, and hope all is well with you - happy new year!
john

[Bogus1]

Eric,
What about asking Kevin for a 1.2-1.6v driver, for a single NiMH driver? I think he did one a loooong time ago, but only made a few.
That'd ROCK!
Thanks, and hope all is well with you - happy new year!
john

Happy new year to you too John! I previously asked Kevin about building NiMh boards but he felt there already was such a product available, however I don't believe in the standard sammie size (once RV7 stopped selling them). Kevin hasn't been pursuing further flashlight driver development for some time and that's not likely to change I'd bet. I'll ask him again soon however and see what he says.

[jch79]

Thanks Eric!

Yeah, RV7 stopped selling them. Although, a NiMH version of the FluPIC would be much more versatile, and certainly more welcomed!

Best,
john

[BigBoy]

jch79,
I have 2 original 3-mode RV7 drivers leftover from previous projects (including putting 2 in Keylux lights). If you want 1 send me a PM.
Bob

Eric,
What about asking Kevin for a 1.2-1.6v driver, for a single NiMH driver? I think he did one a loooong time ago, but only made a few.
That'd ROCK!
Thanks, and hope all is well with you - happy new year!
john

[Icarus]

Hi Eric,

Any updates on the two-stage clicky/twisty tailcap for the KeyLux AA light?
My KeyLux is desperately waiting to get completed...


Freddy

Hi Eric,

Any words on this?

Thanks.
Freddy

[Gary123]

I'm thinking of putting a P7 into the Series SF in a 27mm reflector. What would anyone think is the limit on driving a P7 in this host (for continuous on, or for short burst like 3 - 5 min)?

Thanks

[Bogus1]

I've added the following new items to the store:

TnC E2C E series tube to C Series Head Adaptor [HA Olive-Drab]

TnC E2C E series to C Series Head Adaptor w/fins [Black]

TnC E2C E series to C Series Head Adaptor w/fins [HA Olive-Drab]

I've restocked the following items:

TnC E2C E series Surefire tube to C Series Head Adaptor [Black]

TnC E2C E series Surefire tube to C Series Head Adaptor [HA-NAT]

[alantch]

I'm looking for a black MC123 1-cell extender. When will they be back in stock?

[Bogus1]

I'm looking for a black MC123 1-cell extender. When will they be back in stock?

Hi Alan,

If you would like us to build more MC123s, then if you start a interest thread and we get enough interest we will. Otherwise it's hard in this economy to stock a set of parts that might take years to sell. thanks