--- Extreme Turbo Head for M@g D ---

[Long John]

for updating H22A

I guess, this body fits 3x18650 in series. Any chance for a shorter body which fits the 3 cells side by side?

Best regards

______
Tom

[H22A]

What will the OD of this head be?

Roughly about 10cm. It was originally designed with 11.5cm OD but I have to reduce the size to 10cm because aluminum is not available at that size.

[H22A]

Thank you everyone for your suggestions. I'll post #1 and #3 head with designated body in few days. I'll keep you posted. Thanks.

[Icarus]

Definitely interested.
As long as the head is MagD compatible and available in black the fat body isn't necessary.
FM's tri-bored 2.5D's (6x17670 - 6s or 2s3p) are just fine for me.

[DFiorentino]

I have several smaller version. As you can see it only housed 4 x McR-27.

Just curious, but has the plan for 6, 7+ LEDs been abandoned? I'm still in either way.

-DF

[H22A]

Just curious, but has the plan for 6, 7+ LEDs been abandoned? I'm still in either way.

-DF

Still active. I've received price for the head and awating for schott 2mm double sided AR coatings to come in. Hopefully, within this week.

[H22A]

Here is what the whole light looks like with new body attached to the head. FYI, head in the pics are for illustration purpose only. It is quad McR-27 version. I'll post ETH interest thread for in B/S/T soon. One member suggested that "Mamoth" is betther name for it. What do you think?

I have been informed by CNC shop that MOQ is 25pcs. I'm not sure if we are going to meet this numbers. Hopefully, I don't have to abort this project.

[Icarus]

... I have been informed by CNC shop that MOQ is 25pcs. I'm not sure if we are going to meet this numbers. Hopefully, I don't have to abort this project.

I might need a few...

[Long John]

H22A, only a suggestion. This body looks nice but I think, it's not determined for 3x 18650 cells side by side.
So like Freddy (Icarus) stated, a thread at the head fitting the Mag D-body would be fine, you could make a shorter body for 3x18650 side by side with the D-Mag threads.
This would tender more possibilitys in all directions in therms of the batts.

When a customer decide to go with C/D, 17670........LiIons, he could choose the Mag-body and the others (like me) could choose the fater, shorter body, all with the same threads.

BTW "Mamoth", I like it

Best regards

_____
Tom

[MorpheusT1]

Very nice H22A,


This body looks like it is intended to work with 6x18650 Li-ions.
Is the body possible to unscew for 3x18650 use also?

I am also very curious about the Battery holders,will they be possible to convert to Serial VS Paralell in a easy way?
Giveing both options if needed depending on converter use?




Keep it up
Benny

[Nebula]

H22A - I like the look, and the proposed name. I too would like the option of using only 3x18650s or 3x17670s if you consider a shorter body tube. Well done! Kirk

[MorpheusT1]

Love it Love it and Love it.


Im in for two of these if i can get a 2 part body so i can choose whether to use 3x18650`s and 6x18650`s.

And as stated before Holders should be easy convertable to Serial/Paralell use.




Any update on the E-series head?


Benny

[karlthev]

Wow!!!! Wow again!! I want one!! Put me in line!!!


Karl

[karlthev]

Karl

[H22A]

Thank you everyone for your suggestions. I'll modify the body into 2 pieces similar to body extension. Therefore, those that preferred 3 x 18650 will have shorter body and by adding body extension makes 6 x 18650.

Thank you Morpheus T1 for battery holder suggestion. It's good idea to have convertable capabilities. I'll have to work on that.

[Long John]

Great idea Benny and H22A

Best regards

_____
Tom

[MorpheusT1]

Thank you for listening

Just to confirm,in the post above you state that this head is for McR27 did you mean McR27L by any chance?

I hope so


If all turns out as you have stated,i dont think 25 units will be hard to sell at all.


Benny

Thank you everyone for your suggestions. I'll modify the body into 2 pieces similar to body extension. Therefore, those that preferred 3 x 18650 will have shorter body and by adding body extension makes 6 x 18650.

Thank you Morpheus T1 for battery holder suggestion. It's good idea to have convertable capabilities. I'll have to work on that.

[H22A]

Thank you for listening

Just to confirm,in the post above you state that this head is for McR27 did you mean McR27L by any chance?

I hope so


If all turns out as you have stated,i dont think 25 units will be hard to sell at all.


Benny

That's correct Benny, McR-27L. Actually, it will host various reflector sizes as heatsink is threded which can be adjusted up or down.

[MorpheusT1]

Sounds good


I cant wait to see the final result.


Benny

[H22A]

Thank you for listening

Just to confirm,in the post above you state that this head is for McR27 did you mean McR27L by any chance?

I hope so


If all turns out as you have stated,i dont think 25 units will be hard to sell at all.


Benny

That's correct Benny, McR-27L. Actually, it will host various reflector sizes as heatsink is threded which can be adjusted up or down.

[yaesumofo]

NICE!!
Yaesumofo

[H22A]

I'm still waiting for isometric drawing from the draftsman. Apparently he is out of town and should be back next week.

I know some of you are waiting on price. I have prices in for the head and waiting for the body. If you think it is appropriate to post just price for the head, please let me know. I'm reluctant as there are other parts that haven’t yet materialized.

[Nebula]

Setapong - I can wait on pricing. You should be comfortable with your pricing before you post. Kirk

[Long John]

Setapong - I can wait on pricing. You should be comfortable with your pricing before you post. Kirk

+1, a good thing needs time and I think, this project is one of the interestings ones in the last time.

Very best regards

_____
Tom

[COMMANDR]

Just saw this thread and all I can say is WOW. Put me on the very interested list. How did i miss this???

Gary

[wannabe333]

Wow, it is too late, but since i am new to this site, anyone has one head to spare, please pm. thanks. wannabe333