●-●-● Arc LS HAIII CR2 Twisty for sale ●-●-● [Shipped]
GOOD NEWS EVERYONE !!!
Status: Shipped :twothumbs
USA: Expect this week.
The rest of the World: During or after this weekend.
Whenever these are received, do let me know by posting
in this thread. Pics are very welcome too ! For those that
are unable to post pics, please send them to me and I will
host and post them for you: george (at) bombelman.com
(High-res pics are not a problem, my server can handle them.)
BTW:
I'm currently in Suriname where I only have very limited internet
access and I will also be in the Interior (aka Amazon Jungle)
for a few days. I DO check e-mail every once in a while, so please
send mails to george (at) bombelman.com if needed.
For more info about Suriname click here.
(And check the Photographs too...)
:nana:
Arc LS HAIII CR2 Twisty on Arc LS HAIII Head
Arc LS Bare Alu CR2 Twisty on Arc First Run Bare Alu Head
Arc LS HAIII CR2 Twisty on Arc LS Goldy Head
Groupshot:
Arc LS Bare Alu CR2 Twisty on Arc LS Polished Bare Alu Head
Regular Kroll Arc
Arc LS HAIII Alu CR2 Twisty on Arc First Run Bare Alu bosy with HAIII Bezel
Some more Eyecandy:
Not just 1, but 48 total !
:twothumbs :rock:
First some info:
2nd batch interest thread.
1st batch interest and sales thread.
2nd (Limited) Run of these CR2 tubes.
Limited meaning 48 units ONLY.
(44 pcs numbered, 4pcs BARE ALU)
Status Feb 24th 2007:
All units have been machined and are in line at the finishing-shop
to get the HAIII done and then get laser-etch.
Accepting payment now.
Based on experience, I have set a firm price of US$55 shipped
everywhere. Standard shipping. Will not be held accountable for loss.
Upgrade for shipping will be available. (CC-Paypal +4%)
When sending paypal, USE THIS SUBJECT LINE PLEASE !!!!
Subject: CR2 - ## - CPF-Handle
Where ## is the serial(s), eg: CR2 - 01/02 - Bombelman
In the message field provide shipping-address EVEN if PP
alsready sends it.
Also, PLEASE also send an e-mail in the same way PLEASE !!!!
Not all transactions from paypal get forwarded to my e-mail.
Please send Credit Card payments to:
george (@) bombelman.net
Please note, for CC-payments to add 4%,
which brings the total to US$57.20 per part.
Cash payments can still be sent to:
george (@) bombelman.com
US $55.00 per part shipped.
Questions welcome, however this is a SALES THREAD.
The part has not changed in design, so I will copy/paste all
info from the First Run here:
- SINGLE run of ONLY 48 CR2 Tubes, made from Grade 6061 Solid Alu Rods...
- These CR2 Tubes WILL BE numbered. (from 45 up.)
- When finished, the outer diameter (OD) of the CR2Tube will measure (about) 24,2mm on the knurls...
(Same as LS2 and later tubes, first run tubes were 25mm)
- Outside finish is HAIII natural. (some call it Olive Drab)
From annodizer: "The color of the final anodizing depends on the alloy of aluminum used, the voltage through the chem bath, the solution of chem used, etc... It difficult to say how well they will match... ...It's a slightly greenish-grey color. More grey than green."
Threads and inner-tube are BARE ALU, not Chemkoted.... (now Chemkote)
Shipping to the buyers will be from USA.
- 1 O-ring will be included for every CR2Tube (but not fitted).
- 1 0,292" split ring will be included with every CR2Tube (but not fitted).
(This I will include FREE of charge, because I've made this version to allow a ring to be fitted and it would encourage more EDC on straps...)
- Estimated time it will take to appear on your doorstep: 4-6 weeks...
- This is a custom job, and for factories that make 1000+units of a product, 1 run of 48tubes is not a cheap job. Expect to pay 100% of the manufacturing/shipping/handling/misc. costs...
- Payment method preferred: Cash and CC (+4%) Paypal.....
Best regards, Bombelman.
GOOD NEWS EVERYONE !!!
Status: Shipped :twothumbs
USA: Expect this week.
The rest of the World: During or after this weekend.
Whenever these are received, do let me know by posting
in this thread. Pics are very welcome too ! For those that
are unable to post pics, please send them to me and I will
host and post them for you: george (at) bombelman.com
(High-res pics are not a problem, my server can handle them.)
BTW:
I'm currently in Suriname where I only have very limited internet
access and I will also be in the Interior (aka Amazon Jungle)
for a few days. I DO check e-mail every once in a while, so please
send mails to george (at) bombelman.com if needed.
For more info about Suriname click here.
(And check the Photographs too...)
:nana:
Arc LS HAIII CR2 Twisty on Arc LS HAIII Head
Arc LS Bare Alu CR2 Twisty on Arc First Run Bare Alu Head
Arc LS HAIII CR2 Twisty on Arc LS Goldy Head
Groupshot:
Arc LS Bare Alu CR2 Twisty on Arc LS Polished Bare Alu Head
Regular Kroll Arc
Arc LS HAIII Alu CR2 Twisty on Arc First Run Bare Alu bosy with HAIII Bezel
Some more Eyecandy:
Not just 1, but 48 total !
:twothumbs :rock:
First some info:
2nd batch interest thread.
1st batch interest and sales thread.
2nd (Limited) Run of these CR2 tubes.
Limited meaning 48 units ONLY.
(44 pcs numbered, 4pcs BARE ALU)
Status Feb 24th 2007:
All units have been machined and are in line at the finishing-shop
to get the HAIII done and then get laser-etch.
Accepting payment now.
Based on experience, I have set a firm price of US$55 shipped
everywhere. Standard shipping. Will not be held accountable for loss.
Upgrade for shipping will be available. (CC-Paypal +4%)
When sending paypal, USE THIS SUBJECT LINE PLEASE !!!!
Subject: CR2 - ## - CPF-Handle
Where ## is the serial(s), eg: CR2 - 01/02 - Bombelman
In the message field provide shipping-address EVEN if PP
alsready sends it.
Also, PLEASE also send an e-mail in the same way PLEASE !!!!
Not all transactions from paypal get forwarded to my e-mail.
Please send Credit Card payments to:
george (@) bombelman.net
Please note, for CC-payments to add 4%,
which brings the total to US$57.20 per part.
Cash payments can still be sent to:
george (@) bombelman.com
US $55.00 per part shipped.
Questions welcome, however this is a SALES THREAD.
The part has not changed in design, so I will copy/paste all
info from the First Run here:
- SINGLE run of ONLY 48 CR2 Tubes, made from Grade 6061 Solid Alu Rods...
- These CR2 Tubes WILL BE numbered. (from 45 up.)
- When finished, the outer diameter (OD) of the CR2Tube will measure (about) 24,2mm on the knurls...
(Same as LS2 and later tubes, first run tubes were 25mm)
- Outside finish is HAIII natural. (some call it Olive Drab)
From annodizer: "The color of the final anodizing depends on the alloy of aluminum used, the voltage through the chem bath, the solution of chem used, etc... It difficult to say how well they will match... ...It's a slightly greenish-grey color. More grey than green."
Threads and inner-tube are BARE ALU, not Chemkoted.... (now Chemkote)
Shipping to the buyers will be from USA.
- 1 O-ring will be included for every CR2Tube (but not fitted).
- 1 0,292" split ring will be included with every CR2Tube (but not fitted).
(This I will include FREE of charge, because I've made this version to allow a ring to be fitted and it would encourage more EDC on straps...)
- Estimated time it will take to appear on your doorstep: 4-6 weeks...
- This is a custom job, and for factories that make 1000+units of a product, 1 run of 48tubes is not a cheap job. Expect to pay 100% of the manufacturing/shipping/handling/misc. costs...
- Payment method preferred: Cash and CC (+4%) Paypal.....
Best regards, Bombelman.
Last edited: