Quad XR-E Elephant

[cmacclel]

-Five Mega Host
-4x Cree XR-E P4 WG LEDS
-www.taskled.com Bflex Driver Board 350ma/500ma/750ma/1000ma user selectable with 8 different brightness levels within each current table
-6x R123/CR123 battery holder (Custom Battery Sleeves)
-Custom heatsink
-Custom centering rings to center reflectors
-MCR27XR Reflectors

With R123's at 1000ma to the emitters the light draws 650ma.

[WAVE_PARTICLE]

let me be the first to say:




WP

[MorpheusT1]

Awsome mod Mac,

The throw must be awsome on this light.



I cant wait to get my H22A Quad McR27XR Head.




Benny

[Senses]

nice touch on battery sleeves

[tdurand]

I'll take it!


T

[kenster]

Mac, what can I say but...........


Please, don`t ever get tired of out doing yourself!


Ken

[jch79]

[Led_Blind]

Woooowwww. I want!!

[SpeedPRO]

Geeezzz Mac

[Sable]

Now that is an unusual lookin' critter. Folk's tell me I was lying if I told 'em that started life as a Mag Lite...

I'll take it!

[cratz2]

Those are actually 27mm reflectors in there?

That's awesome!

[easilyled]

Beautiful light - please make it available.

[Strauss]

Wow!, you are a master builder for sure!

[cmacclel]

Now that is an unusual lookin' critter. Folk's tell me I was lying if I told 'em that started life as a Mag Lite...

I'll take it!

The only thing from a Maglite in these units is the switch. Everything else is from scratch.


Mac

[wquiles]

Outstanding !!!

Will

[jumpstat]

Excellent design. Something different but very nice indeed..

[bombelman]

Sexy, very sexy...

[milkyspit]

That's one sexy looking light, Mac. I especially like the swooping curves in the bezel ring.

[karlthev]

Nice flashlight!


Karl

[cmacclel]

That's one sexy looking light, Mac. I especially like the swooping curves in the bezel ring.

Thats Five Mega's new head design

Mac

[AdamW]

Cool light!

Centering rings dood! Sell 'em!!!

[Lurveleven]

Very nice photos, and those new FM heads are stunning.

Why use a fat body when running on R123/CR123 batteries? You could have used a tri-bored normal Mag body for that. I would have expected that it used 18650 cells since it had a fat body.

Sigbjoern

[cmacclel]

Very nice photos, and those new FM heads are stunning.

Why use a fat body when running on R123/CR123 batteries? You could have used a tri-bored normal Mag body for that. I would have expected that it used 18650 cells since it had a fat body.

Sigbjoern

Why?

Because it was the only light that can fit 4x 27mm reflectors. Ideally I would have used 3x 18650 but thats not possible as the MaxFlex boost driver is not released, so for now I'm stuck with the BFlex buck driver.

Mac

[MorpheusT1]

Mac is right,

But doesent the new FM heads fit D size Mag bodies?
It is possible to run the Bflex with 6xR123`s in a Serial 3x17670 FM holder in a short Mag D body.


But i think this particular light would look goofy with a stock mag body.



I find myself looking at all these beutiful creations every day,and one word can only describe what i see...SEXY...


Im sick and you know you are too!!




Benny

[cmacclel]

Mac is right,

But doesent the new FM heads fit D size Mag bodies?
It is possible to run the Bflex with 6xR123`s in a Serial 3x17670 FM holder in a short Mag D body.


But i think this particular light would look goofy with a stock mag body.



I find myself looking at all these beutiful creations every day,and one word can only describe what i see...SEXY...


Im sick and you know you are too!!




Benny

Yes the 3" heads Fit "D" body's but then what do I do with the Fat body and NO HEAD

Mac

[Lurveleven]

That's what I thought, if you have an extender you can run it on 6 x 18650 and probably get 4 times longer runtime. What is the runtime with R123 @ 1000ma ? I'm guessing 55 minutes.

Morph, I don't think the FM big heads look goofy on stock mag bodies.

Sigbjoern

[Lurveleven]

Yes the 3" heads Fit "D" body's but then what do I do with the Fat body and NO HEAD

Mac

You send it to me so I can use it on my 3.5" head

Sigbjoern

[cmacclel]

That's what I thought, if you have an extender you can run it on 6 x 18650 and probably get 4 times longer runtime. What is the runtime with R123 @ 1000ma ? I'm guessing 55 minutes.

Morph, I don't think the FM big heads look goofy on stock mag bodies.

Sigbjoern

There where no extenders made in Gun Metal Grey or that definetly would be an option. I can only build lights with whats available

Runtime on high should be about an hour. The light is so bright I doubt you would ever need to use it on high constantly


Mac

[Sable]

So it's not so much a heavily-modified Mag as a new light that happens to use a Mag switch.

You're ticklin' my hot rod genes, Mac...

[Regentag]

Mac - you leave me breathless.