5.3mm Ceramic socket for MR11 Reflectorized Bulb

[icpd30]

FM, if you please:

G5.3.......................$29.50
12V,50W,13' MR16.....$6.00
G4 Brass..................$16.00
BoroLens..................$6.50
BiPin w1160..............$6.00
BiPin w1111..............$9.00
ROP 3854.................$10.00
ROP3853..................$10.00
subtotal...................$93.00
shipping...................$4.00 (cover it?)

TOTAL --------------$97.00

PP Sent

[MrValiant]

G5.3 Socket $29.50
Shipping $2.50
Total $32.00

Thanks.
Bryan

[jdriller]

for

G5.3 Socket $29.50
Shipping $2.50
Total $32.00

[jd_oc]

G5.3 Socket - $29.50
Shipping - $2.50
Total - $32.00
Paypal Sent!
CPF handle JD_OC

[357mag1]

One 5.3mm socket - $29.50

[dannyk]

sent

1 x G5.3 Socket $29.50
1 x International shipping $4.50
Total: $34.00

Transaction ID #4B5807933D756135E

[357mag1]

2 sockets – 29.5 + 27 = $56.50
2 12V, 50W, 13 degree MR16 = $12
Shipping - $2.50

Total - $71

[win734440]

Hello, I recieved my 5.3 mm socket a few day's ago. At home depot they had quite a few Spot & flood both. But they said all they have is the MR16 . the packing with the bulb did not have the Base size written on it . Also I noticed in the beginning of these thread's that it has written with picturers of the socket's and maglites MR16. Doe's the 5.3 socket fit and work with a Mr16 spot or must it be a MR11 ? By just looking at them they seemed to appear to be able to fit. what the heck it is only $6.00 so i guess if i do not get an answer I will try one of the 35 watt MR16's..also do they throw very far ? it had SPOT written on the package while most were Flood. If it fit's and work's good i will post it .
I can get the voltage easy in a 3-D with NiZn AA's in a batery older that hold's 6 or 9 AA would it mess up anything if you used 6 Lithium ion 14500's ? using just 4 of them with 2 dummies is 16 volts if charged to 4 volt's Thank's Five Mega for the Mega products you make.

[fivemega]

Hello, I recieved my 5.3 mm socket a few day's ago. At home depot they had quite a few Spot & flood both. But they said all they have is the MR16 . the packing with the bulb did not have the Base size written on it . Also I noticed in the beginning of these thread's that it has written with picturers of the socket's and maglites MR16. Doe's the 5.3 socket fit and work with a Mr16 spot or must it be a MR11 ? By just looking at them they seemed to appear to be able to fit. what the heck it is only $6.00 so i guess if i do not get an answer I will try one of the 35 watt MR16's..also do they throw very far ? it had SPOT written on the package while most were Flood. If it fit's and work's good i will post it .
I can get the voltage easy in a 3-D with NiZn AA's in a batery older that hold's 6 or 9 AA would it mess up anything if you used 6 Lithium ion 14500's ? using just 4 of them with 2 dummies is 16 volts if charged to 4 volt's Thank's Five Mega for the Mega products you make.

As long as MR11 or MR16 pins are G5.3, will work with these sockets.
MR16 has 2" diameter reflector while MR11 is 1.5" diameter. Both will fit and will work in M*glite. Just make sure pins are G5.3
Spot or flood is users preference and spot throws further while flood has wide angle beam for close range.
Most 12 volts MR11 and MR16 bulbs are long life and can be overdriven with 5 IMR 14500 and a dummy in 2D M*g

[BigusLightus]

from BigusLightus for:

1 x G5.3 Ceramic Socket for MR16 $29.50
shipping $2.50
total $32.00

Thank you for making these available!

[bammo]

5.3 Socket $29.50
Borofloat high temp glass $7.50
International shipping $5
Grand total $42

To Bammo68 in Western Australia - Paypal inbound!

[maglitemodder]

Hey fivemega-

Are you still selling these adapters? Please message me if so.

Thanks!

[fivemega]

This thread is still active and more sockets are available.

[kevlicht]

I would like to purchase four of the 5.3 mm sockets for MR-16's. Please advise how I should proceed. Kevlicht

MR16 G5.3 Socket

AVAILABLE

Here I have another innovation of hi-temp PR base to Gx5.3 bi-pin sockets with premium quality ready to ship.
Gx5.3 bulb pins are 5.3mm apart.
G4 sockets are available here
Very easy to use. No tool needed, no cutting, grinding and no skills. Will fit in stock M*g C and D switch without modification.
Advantages are low price (around $5) reflectorized bulb available everywhere such as Home Depot or many hardware/electrical store and comes in many choices of 5-10-20-35-50 or 75 watts with or without glass, flood or spot.
Since many of these bulbs are rated 2000-2500 hours life time, you can push the bulb to 18.5 volt.
All you need to do is:
1-Loosen M*g head about 6 turn.
2-Remove bezel, plastic reflector and bulb.
3-Install 5.3mm socket in original switch.
4-Push in your reflectorized 5.3mm bulb into socket.
5-Install bezel with your Boro lens.
Will work with all MR11 and MR16 G5.3 bulbs such as Osram, GE, Philips and...

PR base is mill machined from solid brass, gold plated for premium quality and best electrical connection, then electrically separated with hi temp ceramic. No bare metal to oxidize, no glue to smoke, no soldering to melt down.
I have tested 50 watt reflectorized bulb with 5 protected "C" cells in M*g and its amazingly bright, white and soft beam.
Using 5 IMR 26500 in 4D M*g and 100 watt, 2500 hours MR16 is another great idea.

Price:
G5.3 Socket $29.50 for first socket. cash or CC. AVAILABLE
G5.3 Socket $27 for each additional sockets. AVAILABLE
12V, 35W, 12 degree MR16 $5 NOT AVAILABLE
12V, 50W, 13 degree MR16 $6 NOT AVAILABLE
Borofloat lens $7.50 AVAILABLE
Shipping:
$2.50 to States (any quantity)
$4.50 internationaly (any quantity)
Paypal to: fivemega@aol.com
Please contact me for other type of payment or combine shipping.
It is Necessary to post your request here and detail of your order in Paypal note.
for 3 sockets
All comments welcome.
--------------
Please see:
G4 Socket[/QUOTE]

[kevlicht]

Please advise how I can purchase these Gx5.3 sockets and where I can purchase flashlights that will drive a 12.0volt MR-16. Thank you.

[fivemega]

Please advise how I can purchase these Gx5.3 sockets and where I can purchase flashlights that will drive a 12.0volt MR-16. Thank you.

Please read post #1
Pay correct amount to provided paypal address.
Include your CPF handle nickname in paypal note then post here.
===================
Also read this for best flashlight host.

[Dweill]

Hi 5M

Two sockets please $29.50+$27
two packs Pelican 3854 $20
int ship $4.50
total sent $81.00 via Paypal

Reflectors and Cams look great - thanks!

Best

Dwell

[sergey]

Hi, fivemega

$29.50 G5.3 Socket
$4.50 international destination.
$34 Total

Thanks

[mckeand13]

Does anybody have pictures of a light assembled with one of the MR bulbs installed and some feedback on how these work? Beam shots?

[thundertree]

From thundertree for:
Four (4) G5.3 Socket(s) @ $29.50 & $27 x 3 = $110.50

Insurance $2.60
$2.50 shipping
TOTAL: $115.60

Unique Transaction ID # 5TM26186SA5688831

Much thanks!!

[creecjm30]

I am new to this forum. I would like to order the g5.3 bi-pin adapter. How do I do that?

[fivemega]

More 5.3mm ceramic sockets available now.

[mjgsxr]

More 5.3mm ceramic sockets available now.

1 socket G 5.3
1 boro lens d cell size

[DC12volt]

one 5.3 socket 29.50
1 borofloat lens 7.50
shipping 2.50
total 39.50

paypal sent