RofisLight        
Page 1 of 10 12345678 ... LastLast
Results 1 to 30 of 274

Thread: Aspherical Mag 1C

  1. #1
    Flashaholic*
    Join Date
    Dec 2003
    Location
    Georgia
    Posts
    847

    Default Aspherical Mag 1C

    Mag C cut down for AW 1C Li-ions length .
    Runs on C Li-ions as well as 18670 li-ions.

    Cree Xre Direct drive .
    Aspherical lens.
    Bezel machined to acomodate the aspherical lens.

    Tailcap has been Bored to sink the spring deeper to have less force on the protection circuit inside Li-ions.
    The beam so bright that if you even look at tha beam in the mirror you will see spots for a while. Looking at the beam directly causes temporary blindness.
















    I have added photos to show how it can be also used with a 18650 li-ion.

    You can see two springs . The original spring is recessed .





    Now you can use the C Li-ion.


    If you want to use the 18650 You just pull out the original spring like this.
    Now the 18650 goes in comfortably without getting all jammed up and messing up it's protection circuit.




    Size difference with recessed spring.



    Click for Comparison beamshots .Thanks to Nitro for providing these .


    Fine Print.
    No spring was harmed in any way in the modifying of this tailcap.



    $97.00 For the 50mm version Shipped in the US with delivery confirmation.
    $115.00 for the 52mm aspherical lens Shipped in the US with delivery confirmation.
    Add $9.00 for finning the head . $ 4.00 for grooving the body .

    International orders Shipping $14.50. Please Pm me before sending Paypal.
    Please mention your CPF name in with your Paypal other wise it is hard to track the sender as paypal does not relay that information.

    Paypal to ledean10@yahoo.com
    Last edited by Ledean; 10-25-2007 at 03:40 PM. Reason: More photos

  2. #2
    Flashaholic
    Join Date
    Mar 2007
    Location
    Utah, USA
    Posts
    159

    Default Re: Aspherical Mag 1C

    Nice!


    I hope to see more these from you in the future.
    I'm all about the bright lights! I'm currently looking to buy: Nothing!...but you all know how that goes..
    A lot of companies make good flashlights but CPF makes those flashlights great!

  3. #3
    Flashaholic* choppers's Avatar
    Join Date
    Aug 2006
    Location
    Southern California
    Posts
    1,057

    Default Re: Aspherical Mag 1C

    Excellent work!!! Would love to have one of my own!!

  4. #4
    Flashaholic* ZeissOEM2's Avatar
    Join Date
    Jan 2005
    Location
    Norway
    Posts
    911

    Default Re: Aspherical Mag 1C

    A little bit off topic ,but this one have been using Aspherical lens a long time
    http://www.docter-germany.com/fronte....php?itid=618&

  5. #5
    Flashaholic*
    Join Date
    Dec 2003
    Location
    Georgia
    Posts
    847

    Default Re: Aspherical Mag 1C

    Thanks. I wonder how many people are interested..
    Later today I will post pictures of the modified mag tailcap withtwo springs ..
    Are two springs better than one? ..

    I will try to get better photos .

  6. #6
    Flashaholic* PhantomPhoton's Avatar
    Join Date
    Jan 2007
    Location
    OR
    Posts
    3,113

    Default Re: Aspherical Mag 1C

    There seemed to be a lot of interest on Mac's thread on these. And a lot of us on the main list are still waiting, not to mention all those in the overflow.
    I think the C-cell option is superior to the 18650 in a D body. What I'm really interested in myself is a magmod that cuts out the stock mag switch and uses a tailcap clickie. The tailcaps are available, but I lack the knowledge and tools to get rid of the stock mag switch. If Mac doesn't come thru soon on his aspherical mags I'd be in for one here, and if you can cut out the stock switch to get everything even shorter, I'd be in for one even if I get my aspherical D-18650 from Mac.
    1) Neutral white, it's the new black. Heck, it's not even "new" anymore.
    2) User Interface... KISS.
    3) Proprietary cells and battery packs - Just say NO!

  7. #7
    Flashaholic* Long John's Avatar
    Join Date
    Mar 2006
    Location
    Spain, near Cadiz
    Posts
    2,307

    Default Re: Aspherical Mag 1C

    Ledean

    I would be interested at some datas.

    What current will see the Cree and which binning does it have?

    Do have also the impressions, that the Lens will affect the tint a little blueish?

    Thanks and best regards

    _____
    Tom
    It's cheaper to get a high quality light than spending money for many cheap lights.

  8. #8
    Flashaholic* choppers's Avatar
    Join Date
    Aug 2006
    Location
    Southern California
    Posts
    1,057

    Default Re: Aspherical Mag 1C

    I am in for sure!!!!!!!!!

  9. #9

    Default Re: Aspherical Mag 1C

    Quote Originally Posted by PhantomPhoton
    There seemed to be a lot of interest on Mac's thread on these. And a lot of us on the main list are still waiting, not to mention all those in the overflow.
    I think the C-cell option is superior to the 18650 in a D body. What I'm really interested in myself is a magmod that cuts out the stock mag switch and uses a tailcap clickie. The tailcaps are available, but I lack the knowledge and tools to get rid of the stock mag switch. If Mac doesn't come thru soon on his aspherical mags I'd be in for one here, and if you can cut out the stock switch to get everything even shorter, I'd be in for one even if I get my aspherical D-18650 from Mac.
    L2T/123|Civictor (polished)|Luxogen LR12|P1D-CE/kooter/McR17XR (polished)|L0P-SE|D-Mini|Boxer 24W HID|L1D-CE/P2D|L0D-CE|Quard USW0I 1C|LM631|A-mag 1C@1.2A flupic|MRV|Thor X Colossus|P2DQ5|KDAAASSC

  10. #10
    Flashaholic speederino's Avatar
    Join Date
    Jan 2006
    Location
    Ohio
    Posts
    278

    Default Re: Aspherical Mag 1C

    WOW!

    So simple...so simply ridiculous!

    Does it focus down to a square beam?

    I'm !

  11. #11
    Flashaholic*
    Join Date
    Dec 2003
    Location
    Georgia
    Posts
    847

    Default Re: Aspherical Mag 1C

    Quote Originally Posted by speederino
    WOW!

    So simple...so simply ridiculous!

    Does it focus down to a square beam?

    I'm !
    Yes it does.

  12. #12
    Flashaholic*
    Join Date
    Dec 2003
    Location
    Georgia
    Posts
    847

    Default Re: Aspherical Mag 1C

    Quote Originally Posted by PhantomPhoton
    There seemed to be a lot of interest on Mac's thread on these. And a lot of us on the main list are still waiting, not to mention all those in the overflow.
    I think the C-cell option is superior to the 18650 in a D body. What I'm really interested in myself is a magmod that cuts out the stock mag switch and uses a tailcap clickie. The tailcaps are available, but I lack the knowledge and tools to get rid of the stock mag switch. If Mac doesn't come thru soon on his aspherical mags I'd be in for one here, and if you can cut out the stock switch to get everything even shorter, I'd be in for one even if I get my aspherical D-18650 from Mac.

    The body is cut off and rethreaded so that the head screws on .
    Magamod's tail can now be used . This procedure shortens the body length considerably. It can be done.
    To just get rid of the stock switch all you do is remove the rubber cover and use 5/64 hex keys to unscrew it.

  13. #13
    Flashaholic* choppers's Avatar
    Join Date
    Aug 2006
    Location
    Southern California
    Posts
    1,057

    Default Re: Aspherical Mag 1C

    Ledean, are you planning on making these available soon? My paypal is waiting

  14. #14
    Flashaholic speederino's Avatar
    Join Date
    Jan 2006
    Location
    Ohio
    Posts
    278

    Default Re: Aspherical Mag 1C

    Ledean's fortune cookie says:

    "you may soon find yourself unusually busy"...

  15. #15

  16. #16
    Flashaholic* choppers's Avatar
    Join Date
    Aug 2006
    Location
    Southern California
    Posts
    1,057

    Default Re: Aspherical Mag 1C

    Great pics of the two springs.....great work!! You're killing me here though...NOW I REALLY WANT ONE!!!!! Paypal Waiting

  17. #17

    Default Re: Aspherical Mag 1C

    I'm in for a pewter 1C, with tail button please
    L2T/123|Civictor (polished)|Luxogen LR12|P1D-CE/kooter/McR17XR (polished)|L0P-SE|D-Mini|Boxer 24W HID|L1D-CE/P2D|L0D-CE|Quard USW0I 1C|LM631|A-mag 1C@1.2A flupic|MRV|Thor X Colossus|P2DQ5|KDAAASSC

  18. #18
    Flashaholic*
    Join Date
    Dec 2003
    Location
    Georgia
    Posts
    847

    Default Re: Aspherical Mag 1C

    Quote Originally Posted by LowTEC
    I'm in for a pewter 1C, with tail button please
    You mean the mag clicky that modamag is selling now?


    Choppers
    Yes ,I guess I can make them for sale ....

  19. #19

    Default Re: Aspherical Mag 1C

    If you make them for sale I Definetly wanna be on the list please!!!

  20. #20
    Flashaholic* Long John's Avatar
    Join Date
    Mar 2006
    Location
    Spain, near Cadiz
    Posts
    2,307

    Default Re: Aspherical Mag 1C

    Quote Originally Posted by Long John
    Ledean

    I would be interested at some datas.

    What current will see the Cree and which binning does it have?

    Do have also the impressions, that the Lens will affect the tint a little blueish?

    Thanks and best regards

    _____
    Tom

    It's cheaper to get a high quality light than spending money for many cheap lights.

  21. #21
    Flashaholic* Sub_Umbra's Avatar
    Join Date
    Mar 2004
    Location
    la bonne vie en Amérique
    Posts
    4,757

    Default Re: Aspherical Mag 1C

    Wow.

  22. #22
    Flashaholic
    Join Date
    Dec 2003
    Location
    Lake Arrowhead, So Kal
    Posts
    291

    Default Re: Aspherical Mag 1C

    I'm #42 on Mac's A-M@g list. Don't know if I'll ever get one.

    I'm definitely really very interested in one of these in blue with a side or tail switch. Actually, I like the "C" body form factor more than the "D".

    How much for one of these?

  23. #23
    Flashaholic*
    Join Date
    Dec 2003
    Location
    Georgia
    Posts
    847

    Default Re: Aspherical Mag 1C

    Quote Originally Posted by Long John
    Ledean

    I would be interested at some datas.

    What current will see the Cree and which binning does it have?

    Do have also the impressions, that the Lens will affect the tint a little blueish?

    Thanks and best regards

    _____
    Tom
    They are Cree XR-E P4 .
    From what I saw the lens does not seem to give the beam any bluish tint
    The glass is totally color free . If you see a whte paper on which the glass is placed the paper does not seem to have any color change.

  24. #24
    Flashaholic Russianesq's Avatar
    Join Date
    Oct 2006
    Location
    Brooklyn, NEW YORK
    Posts
    394

    Default Re: Aspherical Mag 1C

    very interesting

  25. #25
    Unenlightened
    Join Date
    Mar 2007
    Location
    bay area, ca.
    Posts
    12

    Default Re: Aspherical Mag 1C

    please put me on the list! thx

  26. #26
    Flashaholic*
    Join Date
    Dec 2003
    Location
    Georgia
    Posts
    847

    Default Re: Aspherical Mag 1C

    Quote Originally Posted by Kabible
    I'm #42 on Mac's A-M@g list. Don't know if I'll ever get one.

    I'm definitely really very interested in one of these in blue with a side or tail switch. Actually, I like the "C" body form factor more than the "D".

    How much for one of these?
    Price will be 88.00 each shipped in the US.
    This will include the modified tail switch with double springs.
    Add $ 8.00 for finning the head .

    I can add a regulated board if needed.

  27. #27
    Flashaholic* Long John's Avatar
    Join Date
    Mar 2006
    Location
    Spain, near Cadiz
    Posts
    2,307

    Default Re: Aspherical Mag 1C

    Quote Originally Posted by Ledean
    They are Cree XR-E P4 .
    From what I saw the lens does not seem to give the beam any bluish tint
    The glass is totally color free . If you see a whte paper on which the glass is placed the paper does not seem to have any color change.
    for the reply and good luck with the sales.

    Best regards

    ____
    Tom
    It's cheaper to get a high quality light than spending money for many cheap lights.

  28. #28
    Flashaholic COMMANDR's Avatar
    Join Date
    Feb 2006
    Location
    Belvidere,Il
    Posts
    211

    Default Re: Aspherical Mag 1C

    Looks very interesting, please put me on the list. Do you have any beam shots of this Mag Cyclops (see foot note). I am wondering what kind of a throw this thing has.


    Gary

    Foot note:
    (n. pl. Cy·clo·pes (sī-klō'pēz) Greek Mythology
    1. Any of the three one-eyed Titans who forged thunderbolts for Zeus.
    Phasers on Stun
    Flashaholic

  29. #29
    Flashaholic* Strauss's Avatar
    Join Date
    Aug 2006
    Location
    Plattsburgh, NY
    Posts
    1,301

    Default Re: Aspherical Mag 1C

    Very nice work indeed!
    EDC: Ra Clicky 100WWCn/ Muyshondt Aeon
    Other Favorites: Surefire LX2/Eagletac M2XC4/ DBS V2 1S-R2, MC-E

  30. #30

    Default Re: Aspherical Mag 1C

    How much for one with the stock switch, as pictured in the first post?

Page 1 of 10 12345678 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •