Fenix Mods: Seoul

MarNav1 · May 21, 2007

I want to mod my L2P's with Seoul emitters and two stage switch. What is the
BEST tool to use to open up the head? Is heat needed, I have a 2 stage heat
gun. Is a .030 copper spacer needed under the emitter. EngrPaul, I know you've
done many Fenix lights with great success, maybe your thoughts? :ohgeez:

Nic · May 21, 2007

I used circlip pliers, long-nosed pliers, molewrench, screwdriver and a blowtorch ... the head on my L2P was so well potted that I bent my circlip pliers and rounded the recess in the brass pill and warped the head trying to remove the pill. The ciclip pliers didn't sit properly after that and they slipped causing the circuit board to be damaged. My L2P didn't work after that ... you might have more luck depending on how well potted the head is on your example. Good luck!

eebowler · May 21, 2007

Check out THIS thread as well.

Erasmus · May 21, 2007

Needlenose pliers. I once wrote a tutorial about it, here it is : http://candlepowerforums.com/vb/showthread.php?t=113371 . Pics are off line though and I didn't make a backup so read carefully and you'll understand without pics.

Fenix Mods: Seoul

MarNav1

Flashlight Enthusiast

Nic

Newly Enlightened

eebowler

Flashlight Enthusiast

Erasmus

Flashlight Enthusiast

Similar threads

Latest posts