P2D mod with McR17

Krit

Enlightened
Joined
Dec 4, 2003
Messages
751
Location
Thailand
I like P2D circuit because it is no PWM. The stages start with low which is suit for my use during night. One thing that I don't like it from it's reflector which give corona ring.

I try to find new OP reflect from Fenic Store but not very much improve. Now I have only my house tools to modify it with McR17 XR which I think that it should give very soft light.

IMG_5318.jpg
 
Last edited:

Krit

Enlightened
Joined
Dec 4, 2003
Messages
751
Location
Thailand
I start with cut the body by saw to provide enough room for McR17 XR which is longer than stock reflector and make new heat sink.

IMG_5301.jpg


IMG_5307.jpg


IMG_5308.jpg


IMG_5311.jpg


Absolutely, body lenght is the same as P2D with stock reflect.

IMG_5312.jpg
 
Last edited:

Krit

Enlightened
Joined
Dec 4, 2003
Messages
751
Location
Thailand
I use aluminium foil wrap beside McR17 XR to make it tighten the front lens. This is easy method to make it water resistance but might not very good when compare to use thread from stock reflector.

IMG_5303.jpg


IMG_5322.jpg


I have only 2 P2D, one is mode with SSC stock reflector and one mode with McR17.
Cree with McR17 give flood soft light than stock reflect and even SSC emitter.

IMG_5326.jpg


IMG_5327.jpg
 
Last edited:
Top