Sold/Expired SOLD! 2D Pewter Regulated Seoul Mag with Glow Bezel!

Host: 2D Pewter Maglite
Power: 3C Alkaline or NiMH. (Tail cap and spring modded, PVC battery sleeve)
LED: Seoul P4 USV0I (Warm white, No cold blue/white)
Driver: Wizard 2 917ma (Measured at ~940ma at LED)
GITD: Bezel! 2-Ton epoxy with Green Strontium Aluminate.


Heatsink is hotlips/osink style pressed in with thermal paste and tacked around the top edge with Arctic Alumina epoxy to keep it from sliding out if the mag is dropped. The driver is potted in the back of the heatsink. It is step-up/step-down and will regulate constant current. Wires soldered directly to switch and circuit. LED attached with Arctic Alumina epoxy (isolated).

There is no GITD around the led, but it has teflon wires so when the next big LED comes out you can remove it and re-solder on a new one. You could still paint around the heatsink with GITD paint if you wished of course. The heatsink is flat so any led will work.

Here is a picture of the light before I switched the LED to the Seoul.



Here is a picture of the light again. It has a small scratch on the head. (Don't know how that happened, I just noticed it).



I don't think anyone else has done a glow bezel mag. This one is unique!

$88 shipped.

First "I'll take it" Gets it.
US only please.
Price includes Priority Mail shipping.
Batteries not included!


:wave:

Re: FS: 2D Pewter Regulated Seoul Mag with Glow Bezel!

Great looking light! Do you have a lumen estimate? I don't know alot about Mags.

Re: FS: 2D Pewter Regulated Seoul Mag with Glow Bezel!

Isaac, I"ll take it. Just PM me your address and I'll have money order sent to you.

Re: FS: 2D Pewter Regulated Seoul Mag with Glow Bezel!

Marnav1: it's a U bin Seoul, after de-rating for heat and optical losses, ~130 out the front of the lens? They quote the Seoul P4 doing 240 lumens at 1 amp for what that's worth.

JamisonM: PM incoming!

Re: FS: 2D Pewter Regulated Seoul Mag with Glow Bezel!

JamisonM said:

Isaac, I"ll take it. Just PM me your address and I'll have money order sent to you.

Click to expand...

I'll take it, as backup

Re: SOLD PF: 2D Pewter Regulated Seoul Mag with Glow Bezel!

The glow bezel is very nice! :twothumbs

Re: SOLD PF: 2D Pewter Regulated Seoul Mag with Glow Bezel!

Thanks Icarus.

Re: SOLD PF: 2D Pewter Regulated Seoul Mag with Glow Bezel!

JamisonM: Got the M.O. today, and mailed the light as well!

Just got the light today. Goodness gracious this things bright. Thanks Issac for the great light and fast shipping. I'd definitely recommend you!