Multi-Sink

[download]

It is time to build your own Mulit-LED Mag.
Here is the "Adjustable Heat-sink2" to work with many reflectors & optics. ( Easier for SMALLER board base of cree/luxeon/Seoul )
This version 2 make room for 17mm driver.
Material: Aluminum
Finishing: Bare

A. Multi-Sink2 per set = US$25


B. Tri-XM-L Mirror Reflector (50mm x 18mmH) = US$18/pc (Stock : 1)

C. 50mm Tri / Quad Cree XR-E Optic = US$7/pc (Out of stock)

D. XP-G Orange peel metal reflector Dia. 20mm x 17mmH. = US$9/pc (stock: 8)

F. Connecting socket, 80C 300V 22AWG, 1 set = $1

G. 8x 7135 driver, 17mm - Mutli-Mode, $9/pc (Stock: 15)
4 Mode you can choose:
Memory function will remember the last mode.
1. Low, Mid, High, Stobe, SOS ( Default)
2. Low, High, Low Stobe (2Hz)
3. Low, Mid, High (Low 0.13A, Mid 0.93A, High 2.8A)
4. Low, High




J. AX2002 Multi-level Buck driver = $12 (stock: temp out) ---------------------------
Size: 23mm x 8mm
Volt-in: 3.6V - 15V (0.25V higher than LED voltage)
Applications: 1-4 Leds
Mode: 3 level, Low=50mA, Mid=200mA, High=1A, without Memory mod.

----------------------------------------

Paypal with your CPF handle and address to (07/2012)



----------------------------------------

$4 shipping to Worldwide
If you like Registered mail (Tracking), please add extra $3 ( Free ship with connecting socket x1.)
* For registered mail only:
If the "Lost mail" happened, the replacement will be sent again.*

One shipping fee for all of my products. ( MagCTower, Multi-Sink2 & MagRing2 ) Registered mail is highly recommended.






Just cut your "Star", wire them, put a paper (punch a hole & cut like a donut) isolate the Cree + & -, put thermal "gel" in between (not epoxy), insert the reflectors, seal the bezel, that all, easy?









Direct Drive hints



Poorman Multi-LED setup

Enjoy your mod.

[Nebula]

Charles - very nice mods. Best of luck with your sales.

I will take:

2 x adjustable heat sinks @ $18.00 each = $36.00
S/H @ $4.00
Registered w/ tracking @ $3.00
Total = $43.00
cc pp + 3%



Thanks. Kirk

[LED Zeppelin]

Download, nice idea.

Both parts of the heatsink are included, right?

Is the heatsink loose in the head, and held by compression from the lens?

[download]

Nebula, will ship today.
LED Zeppelin, Yes! Both parts of the heatsink are included.
And it is "Loose" fit (not tight fit) in the head. It need to held by compression from the lens.
Thanks!

[Mirage_Man]

Cool!

[download]

Thanks Brain, another interesting mods will be there very very soon......

[Wok]

Hi Download,

Multisink x 2 $36
Cree 17mm MOP Set x 1 $45
P&P + Trk $7
PP $88 on way

Thks

[3rd_shift]

The paypal interface got me messed up.

I sent paypal for, via registered mail:

A. Multi-Sink x2 = US$36
B. Diameter 17mm Cree MOP Metal reflector x5 = US$45 (3 set only)

I accidentally sent it with credit card payment to your cash only downtoload@gmail one.

I re-sent it via echeck to that one.
That's $176 for $88 worth of stuff.

Please refund the one that came from my credit card if it did clear.
It was my error.

[download]

Wok, Thanks
Sorry for any confusing, 3rd_shift, credit card paypal refunded.
Thanks a lot!

[download]

Wok & 3rd_shift, items shipped. Thanks

[starfiretoo]

1 x Multi-Sink x1 = US$18
1 x Diameter 17mm Cree MOP Metal reflector x5 = US$45
Registered mail = US$7
TOTAL = $70

[robm]

Just cut your "Star", wire them, put a paper isolate the Cree + & -, put thermal "gel" in between (not epoxy), insert the reflectors, seal the bezel, that all, easy?

Enjoy your mod.

A few questions before sending the funds

Do the stars need to be cut to fit 5 in?
Are the stars epoxied down, or just greased?
Could this be done with bare emitters rather than stars?

Thanks

[3rd_shift]

There is a tutorial coming on how to use this heatsink as soon as I have everything needed here to do it with.

Stay tuned.

3rd shift

[download]

robm,
1. If use star/round board, all you need is to cut them like my pictures, or find small board size max. or smaller than 17mm would be fine.
2. Both epoxy & grease are OK, grease will be easier for future upgrade like Cree Q5 or R4. The reflectors press down all star/emitter to the heatsink pretty well.
3. Sure it could be done with bare emitters. Star would be easier only. If use emitters, epoxy should be applied.

Thanks 3rd shift for the tutorial.

I try to prepare a tutorial, for me, Mag2C drive with MaxFlex to Cree x5 is the best of the best.

Cheers!

[robm]

Thanks for the responses - a few more questions though

What should I use to cut the stars?
Would 4 stars w/20mm reflectors fit without cutting?
Any recommendations for reflectors for Cree LEDs (most seems to be for Luxeon/Seoul)?

Thanks again.

[download]

Hi robm,
I just use the normal cutting pliers.

The minium length of the star is 20mm, but max. Length is 20.5mm, the corners touch the edge that it need to be cutted to fit 4 stars inside the head. 20mm is the Max size can fit 4 inside the Head. Stars need to be cutted!

The small Cree reflectors is coming, please wait a few more days.

Stay tuned!

[kabkbak7321]

OK the time has come for me to jump in this multi-thing.bigger is well you know.


1-B. Diameter 17mm Cree MOP Metal reflector x5 = US$45
1-A. Multi-Sink x1 = US$18
$4-shipping to Worldwide
$3-(Tracking)

Total+$70.00

[download]

Hi kabkbak7321, items were shipped. Thanks!

5 set of Cree MOP Metal reflector left only.

[Action]

Any chance of getting a complete drop-in for a newer Mag C with 5 Crees? Would/have you done complete setups to drop in a 2C with AW's LiIon cells?

[download]

Are you talking about like this?
You might see it later at CPF Marketplace.

[Action]

Oh yes!

[Sawtooth]

for:

1x Multi-sink = $18.00
+ shipping = $4.00
----------------------
Total = $22.00

Thanks download.

[download]

Sawtooth, item sent.
Thanks a lot!

[buschpounder]

Pay Pal sent for 1 multi-sink and shipping=$22.00 THANKS.

[ledaholic]

for
1 multi sink $18.00
1 set of Cree Q2 $45.00
$2.00 for 3%
$4.00 shipping
$3.00 registered
Total $72.00
Thanks

[jimjones3630]

order received, thanks jim

[Hill]

4 connectors = $4
$4 S/H
Total $8 + 3% = 8.24

thanks!
Hill

[wally0206]

paypal sent
1x multi-sink $18 + 4 s&h = $22

[download]

Wally0206, items sent. Thanks!

[Wok]

Multisink x 3 = $54
Connecters please
Intl = $4
Ins = $3
Total = $61

PP on way