SunwayLED
Page 1 of 19 1234567811 ... LastLast
Results 1 to 30 of 551

Thread: Multi-Sink

  1. #1
    Flashaholic* download's Avatar
    Join Date
    Jun 2005
    Location
    Sol 3
    Posts
    1,580

    Default Multi-Sink2

    It is time to build your own Mulit-LED Mag.
    Here is the "Adjustable Heat-sink2" to work with many reflectors & optics. ( Easier for SMALLER board base of cree/luxeon/Seoul )
    This version 2 make room for 17mm driver.
    Material: Aluminum
    Finishing: Bare

    A. Multi-Sink2 - Free shipping Worldwide

    $28 = x1 set
    $48 = x2 sets
    $64 = x3 sets





    D. XP-G Orange peel metal reflector Dia. 20mm x 17mmH. = US$9/pc (stock: 8)


    F. Connecting socket, 80C 300V 22AWG, 1 set = $1




    ----------------------------------------

    Paypal with your CPF handle and address to (11/2013)



    ----------------------------------------

    For Registered mail (Tracking), please add extra $4
    Registered mail is highly recommended.






    Just cut your "Star", wire them, put a paper (punch a hole & cut like a donut) isolate the Cree + & -, put thermal "gel" in between (not epoxy), insert the reflectors, seal the bezel, that all, easy?









    Direct Drive hints



    Poorman Multi-LED setup

    Enjoy your mod.
    Last edited by download; 01-19-2014 at 07:33 PM.

  2. #2
    Flashaholic*
    Join Date
    Sep 2006
    Location
    Northern Virginia
    Posts
    993

    Default Re: Multi-Sink

    Charles - very nice mods. Best of luck with your sales.

    I will take:

    2 x adjustable heat sinks @ $18.00 each = $36.00
    S/H @ $4.00
    Registered w/ tracking @ $3.00
    Total = $43.00
    cc pp + 3%



    Thanks. Kirk
    Last edited by Nebula; 06-26-2007 at 10:24 PM. Reason: PP sent added

  3. #3
    Flashaholic* LED Zeppelin's Avatar
    Join Date
    Sep 2005
    Location
    Great Lakes
    Posts
    1,876

    Default Re: Multi-Sink

    Download, nice idea.

    Both parts of the heatsink are included, right?

    Is the heatsink loose in the head, and held by compression from the lens?

  4. #4
    Flashaholic* download's Avatar
    Join Date
    Jun 2005
    Location
    Sol 3
    Posts
    1,580

    Default Re: Multi-Sink

    Nebula, will ship today.
    LED Zeppelin, Yes! Both parts of the heatsink are included.
    And it is "Loose" fit (not tight fit) in the head. It need to held by compression from the lens.
    Thanks!

  5. #5

  6. #6
    Flashaholic* download's Avatar
    Join Date
    Jun 2005
    Location
    Sol 3
    Posts
    1,580

    Default Re: Multi-Sink

    Thanks Brain, another interesting mods will be there very very soon......

  7. #7
    Flashaholic* download's Avatar
    Join Date
    Jun 2005
    Location
    Sol 3
    Posts
    1,580

    Default Re: Multi-Sink

    NetKidz & Nebula, items were shipped. Thanks

  8. #8
    Enlightened
    Join Date
    Jan 2007
    Location
    NC
    Posts
    86

    Default Re: Multi-Sink

    Very interesting and creative idea

    Please send the following

    3, Multi-Sink @ $18 = $54
    1, 17 mm Metal MOP set for Cree = $45
    Shipping, registered $7

    Cash pp to follow

    Thank you,
    Racer7

  9. #9
    Flashaholic* download's Avatar
    Join Date
    Jun 2005
    Location
    Sol 3
    Posts
    1,580

    Default Re: Multi-Sink

    racer7, items were shipped.
    Thanks a lot!

  10. #10

    Default Re: Multi-Sink

    I can't see your pictures.

    Mac
    www.macscustoms.com
    *Note* Shipping Insurance must be requested.

  11. #11
    Flashaholic* download's Avatar
    Join Date
    Jun 2005
    Location
    Sol 3
    Posts
    1,580

    Default Re: Multi-Sink

    Hi Mac, photos were uplaoded to photobucket, it should be US site.
    If you still can't see it, let me know. Let's fix the problem.....

  12. #12

    Default Re: Multi-Sink

    Quote Originally Posted by download View Post
    Hi Mac, photos were uplaoded to photobucket, it should be US site.
    If you still can't see it, let me know. Let's fix the problem.....
    I can see them now. Photbucket must have been down earlier.

    Mac
    www.macscustoms.com
    *Note* Shipping Insurance must be requested.

  13. #13
    Flashaholic Wok's Avatar
    Join Date
    Mar 2007
    Location
    Brisbane...Australia
    Posts
    133

    Default Re: Multi-Sink

    Hi Download,

    Multisink x 2 $36
    Cree 17mm MOP Set x 1 $45
    P&P + Trk $7
    PP $88 on way

    Thks

  14. #14
    Flashaholic* 3rd_shift's Avatar
    Join Date
    Mar 2004
    Location
    DFW. TX. U.S.A. Earth
    Posts
    3,338

    Default Re: Multi-Sink

    The paypal interface got me messed up.

    I sent paypal for, via registered mail:

    A. Multi-Sink x2 = US$36
    B. Diameter 17mm Cree MOP Metal reflector x5 = US$45 (3 set only)

    I accidentally sent it with credit card payment to your cash only downtoload@gmail one.

    I re-sent it via echeck to that one.
    That's $176 for $88 worth of stuff.

    Please refund the one that came from my credit card if it did clear.
    It was my error.

  15. #15
    Flashaholic* download's Avatar
    Join Date
    Jun 2005
    Location
    Sol 3
    Posts
    1,580

    Default Re: Multi-Sink

    Wok, Thanks
    Sorry for any confusing, 3rd_shift, credit card paypal refunded.
    Thanks a lot!
    Last edited by download; 06-29-2007 at 06:11 PM.

  16. #16
    Flashaholic* download's Avatar
    Join Date
    Jun 2005
    Location
    Sol 3
    Posts
    1,580

    Default Re: Multi-Sink

    Wok & 3rd_shift, items shipped. Thanks

  17. #17
    Flashaholic* starfiretoo's Avatar
    Join Date
    Oct 2006
    Location
    KAUAI
    Posts
    1,265

    Thumbs up Re: Multi-Sink


    1 x Multi-Sink x1 = US$18
    1 x Diameter 17mm Cree MOP Metal reflector x5 = US$45
    Registered mail = US$7
    TOTAL = $70
    Last edited by starfiretoo; 07-03-2007 at 03:34 AM. Reason: paypal sent

  18. #18
    Flashaholic* download's Avatar
    Join Date
    Jun 2005
    Location
    Sol 3
    Posts
    1,580

    Default Re: Multi-Sink

    Thanks starfiretoo, got your paypal. Items shipped.
    Last edited by download; 07-03-2007 at 11:08 PM.

  19. #19
    Flashaholic
    Join Date
    Nov 2004
    Location
    North West UK
    Posts
    307

    Default Re: Multi-Sink

    Quote Originally Posted by download View Post
    Just cut your "Star", wire them, put a paper isolate the Cree + & -, put thermal "gel" in between (not epoxy), insert the reflectors, seal the bezel, that all, easy?

    Enjoy your mod.
    A few questions before sending the funds

    Do the stars need to be cut to fit 5 in?
    Are the stars epoxied down, or just greased?
    Could this be done with bare emitters rather than stars?

    Thanks

  20. #20
    Flashaholic* 3rd_shift's Avatar
    Join Date
    Mar 2004
    Location
    DFW. TX. U.S.A. Earth
    Posts
    3,338

    Default Re: Multi-Sink

    There is a tutorial coming on how to use this heatsink as soon as I have everything needed here to do it with.

    Stay tuned.

    3rd shift

  21. #21
    Flashaholic* download's Avatar
    Join Date
    Jun 2005
    Location
    Sol 3
    Posts
    1,580

    Default Re: Multi-Sink

    robm,
    1. If use star/round board, all you need is to cut them like my pictures, or find small board size max. or smaller than 17mm would be fine.
    2. Both epoxy & grease are OK, grease will be easier for future upgrade like Cree Q5 or R4. The reflectors press down all star/emitter to the heatsink pretty well.
    3. Sure it could be done with bare emitters. Star would be easier only. If use emitters, epoxy should be applied.

    Thanks 3rd shift for the tutorial.

    I try to prepare a tutorial, for me, Mag2C drive with MaxFlex to Cree x5 is the best of the best.

    Cheers!

  22. #22
    Flashaholic
    Join Date
    Nov 2004
    Location
    North West UK
    Posts
    307

    Default Re: Multi-Sink

    Thanks for the responses - a few more questions though

    What should I use to cut the stars?
    Would 4 stars w/20mm reflectors fit without cutting?
    Any recommendations for reflectors for Cree LEDs (most seems to be for Luxeon/Seoul)?

    Thanks again.
    Last edited by robm; 07-10-2007 at 07:30 AM.

  23. #23
    Flashaholic* download's Avatar
    Join Date
    Jun 2005
    Location
    Sol 3
    Posts
    1,580

    Default Re: Multi-Sink

    Hi robm,
    I just use the normal cutting pliers.

    The minium length of the star is 20mm, but max. Length is 20.5mm, the corners touch the edge that it need to be cutted to fit 4 stars inside the head. 20mm is the Max size can fit 4 inside the Head. Stars need to be cutted!

    The small Cree reflectors is coming, please wait a few more days.

    Stay tuned!
    Last edited by download; 07-10-2007 at 09:46 PM.

  24. #24
    Flashaholic
    Join Date
    Nov 2004
    Location
    North West UK
    Posts
    307

    Default Re: Multi-Sink

    Thanks for the reply download.

  25. #25
    Flashaholic*
    Join Date
    Dec 2005
    Location
    Belton Texas
    Posts
    1,641

    Default Re: Multi-Sink

    $179 for:

    6 MultiSinks
    1 Set of reflectors
    1 Original brass Magring
    1 MagRing2
    Combined shipping with tracking
    +3% for CC

  26. #26
    Flashaholic* download's Avatar
    Join Date
    Jun 2005
    Location
    Sol 3
    Posts
    1,580

    Default Re: Multi-Sink

    Thanks Don, got your paypal. Will ship when Cree reflectors ready.

  27. #27
    Flashaholic* download's Avatar
    Join Date
    Jun 2005
    Location
    Sol 3
    Posts
    1,580

    Default Re: Multi-Sink

    Thanks Don, will ship tomorow.
    More Cree MOP Metal reflectors in stock.

  28. #28
    Flashaholic* gswitter's Avatar
    Join Date
    Apr 2006
    Location
    California
    Posts
    2,580

    Default Re: Multi-Sink

    CC PayPal sent for:
    • 2x Multi-Sink [$36]
    • 3x MagCTower [$36]
    • Registered Mail [$7]
    • 3% [$2.37]
    Total: $81.37



  29. #29
    Flashaholic* download's Avatar
    Join Date
    Jun 2005
    Location
    Sol 3
    Posts
    1,580

    Default Re: Multi-Sink

    gswitter, got your paypal. Thanks

  30. #30
    Flashaholic* download's Avatar
    Join Date
    Jun 2005
    Location
    Sol 3
    Posts
    1,580

    Default Re: Multi-Sink

    DonShock & gswitter, items sent.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •