PK Design Lab
Page 15 of 19 FirstFirst ... 58910111213141516171819 LastLast
Results 421 to 450 of 551

Thread: Multi-Sink

  1. #421
    Flashaholic* tx101's Avatar
    Join Date
    May 2008
    Location
    London UK
    Posts
    2,328

    Default Re: Multi-Sink

    Hello Charles,

    before placing another order with you, will you be getting any more
    XPG R5 emitters ?

    I need 4 emitters on 10mm boards

    Can you help ?


    Thanks

  2. #422
    Flashaholic* download's Avatar
    Join Date
    Jun 2005
    Location
    Sol 3
    Posts
    1,573

    Default Re: Multi-Sink

    Hi Wai,
    The common xp-g boards size are 14mm, 16mm & 20mm.
    Did not see 10mm size yet.

  3. #423
    Flashaholic* tx101's Avatar
    Join Date
    May 2008
    Location
    London UK
    Posts
    2,328

    Default Re: Multi-Sink

    14mm would be fine then

  4. #424
    Flashaholic* download's Avatar
    Join Date
    Jun 2005
    Location
    Sol 3
    Posts
    1,573

    Default Re: Multi-Sink

    DO you want Dia. 20mm x 17mmH XP-G orange peel reflectors too?

  5. #425
    Flashaholic* tx101's Avatar
    Join Date
    May 2008
    Location
    London UK
    Posts
    2,328

    Default Re: Multi-Sink

    Quote Originally Posted by download View Post
    DO you want Dia. 20mm x 17mmH XP-G orange peel reflectors too?
    Yes please Da Lo

  6. #426
    Flashaholic* download's Avatar
    Join Date
    Jun 2005
    Location
    Sol 3
    Posts
    1,573

    Default Re: Multi-Sink

    This is self-center reflector, very smart design for XP-G use.
    $9/pc.

  7. #427
    Flashaholic* tx101's Avatar
    Join Date
    May 2008
    Location
    London UK
    Posts
    2,328

    Default Re: Multi-Sink

    Will 4 reflectors fit in a Mag head ?
    If they do I'll take 4

    Any XPGs ?

  8. #428
    Flashaholic* download's Avatar
    Join Date
    Jun 2005
    Location
    Sol 3
    Posts
    1,573

    Default Re: Multi-Sink

    It is dia. 20.0mm. It will fit inside Mag head.
    14mm XP-G R5 WC is available. Just wait more 7 days after order.

  9. #429
    Flashaholic* tx101's Avatar
    Join Date
    May 2008
    Location
    London UK
    Posts
    2,328

    Default Re: Multi-Sink

    for

    4 x XPG R5 @$9 each $36
    4 x XPG 20mm reflectors @$9 each $36
    2 x 8x7135 multi mode driver @ $9 each $18
    Shipping $4

    Total $94

    Many Thanks

  10. #430

    Default Re: Multi-Sink

    Any progress on the new multisink design?
    In Him (Jesus Christ) was life; and the life was the light of men. And the light shineth in darkness; and the darkness comprehended it not.
    Shorty C/D M*glites

  11. #431
    Flashaholic* download's Avatar
    Join Date
    Jun 2005
    Location
    Sol 3
    Posts
    1,573

    Default Re: Multi-Sink

    J3004 & JasonH, items were sent.

    tx101, please wait a few days.

    vestureofblood, still need a bit of time.

  12. #432

    Default Re: Multi-Sink

    I kinda figured it might be a while, that's why I picked up the two extra on my last order, just for emergency.
    In Him (Jesus Christ) was life; and the life was the light of men. And the light shineth in darkness; and the darkness comprehended it not.
    Shorty C/D M*glites

  13. #433
    Flashaholic* download's Avatar
    Join Date
    Jun 2005
    Location
    Sol 3
    Posts
    1,573

    Default Re: Multi-Sink

    tx101, items were shipped.

    vestureofblood,

    A few XP-G & relefectors were added.

  14. #434
    Flashaholic* tx101's Avatar
    Join Date
    May 2008
    Location
    London UK
    Posts
    2,328

    Default Re: Multi-Sink

    Received the reflectors and emitters Charles

    Wow .... these 20mm XPG reflectors are GREAT
    Good combination of hotspot and spill.
    Nice and smooth.

    I couldnt wait to build a light. Received the parts on Friday
    and build the light on Saturday





    This is some what of a "Download Special"
    Parts Used

    1 x Multisink
    4 x XPGs
    4 x 20mm reflectors
    1 x 8xAMC7136 multi output board

    As well as supplying all the parts, I used your "Poormans Multi-Lux"
    method to wire everything up ...... Dam, the thing is really bright

  15. #435
    Flashaholic Hill's Avatar
    Join Date
    Apr 2008
    Location
    MA
    Posts
    318

    Default Re: Multi-Sink

    Charles,



    4 x XP-G 20mm reflectors = $36
    shipping = $4

    total = $40

    Thanks,
    Hill

  16. #436
    Flashaholic* Aircraft800's Avatar
    Join Date
    Apr 2007
    Location
    DFW Texas.
    Posts
    1,484

    Default Re: Multi-Sink

    Quote Originally Posted by tx101 View Post

    [SNIP]
    This is some what of a "Download Special"
    Parts Used

    1 x Multisink
    4 x XPGs
    4 x 20mm reflectors
    1 x 8xAMC7136 multi output board

    As well as supplying all the parts, I used your "Poormans Multi-Lux"
    method to wire everything up ...... Dam, the thing is really bright
    Tell a little more about your build, Mag 2C host? 2 Li-Ion with LED's 2 series 2 parallel like this one, or did you do a dual boared 1D Mag?


    It looks awesome! Nice Work!

    @Download,

    Any chance of getting more of these reflectors? I'd like 4
    Last edited by Aircraft800; 05-31-2010 at 02:19 AM.

  17. #437
    Flashaholic Hill's Avatar
    Join Date
    Apr 2008
    Location
    MA
    Posts
    318

    Default Re: Multi-Sink

    Quote Originally Posted by Aircraft800 View Post
    Tell a little more about your build, Mag 2C host? 2 Li-Ion with LED's 2 series 2 parallel like this one, or did you do a dual boared 1D Mag?


    It looks awesome! Nice Work!

    @Download,

    Any chance of getting more of these reflectors? I'd like 4
    More info here. Drivers are wired just like pictured above, i.e. XP-G's are 2s2p so the driver does not get overloaded. Works beautifully so on high, each LED sees 1.4A . The driver can me configured to one of 4 different settings.

  18. #438
    Flashaholic* tx101's Avatar
    Join Date
    May 2008
    Location
    London UK
    Posts
    2,328

    Default Re: Multi-Sink

    Quote Originally Posted by Aircraft800 View Post
    Tell a little more about your build, Mag 2C host? 2 Li-Ion with LED's 2 series 2 parallel like this one, or did you do a dual boared 1D Mag?


    It looks awesome! Nice Work!

    I used this configuration





    I believe it does exactly the same, plus one wire less to solder
    I have to admit, it was only after seeing Hill's thread (see above for link)
    that I got off my a$$ and build a quad XPG.
    Previous to this one I had only build a tri XPG Mag powered by a Tri-Flupic.

    The beauty of Download's 7135 "cheat" is that to build a quad emitter light
    you dont have to buy an expensive board to push the emitters plus
    the fact that there are no boards that can push the XPGs at 1.4A, powered
    by 2 x li-ion and give you a number of choices with the multi level configuration ...... you can disable the dreaded strobe mode

  19. #439
    Flashaholic* Aircraft800's Avatar
    Join Date
    Apr 2007
    Location
    DFW Texas.
    Posts
    1,484

    Default Re: Multi-Sink

    Thanks for the help guys! Very nice builds. I am having trouble sourcing the 19.5~19.9MM reflectors, I hope download gets more

    EDIT: download, I see now that you updated the first post (stock: temp. out) Thanks for the update! I'll grab them when they are back in stock!
    Last edited by Aircraft800; 05-31-2010 at 10:21 PM.

  20. #440
    Enlightened
    Join Date
    Jun 2006
    Location
    Lindenhurst, Illinois
    Posts
    30

    Default Re: Multi-Sink

    paypal sent for one 8x 7135 driver

  21. #441
    Flashaholic* download's Avatar
    Join Date
    Jun 2005
    Location
    Sol 3
    Posts
    1,573

    Default Re: Multi-Sink

    Wow tx101, it is nice. How easy to center the XP-G.

    Hill, items were sent.

    Aircraft800, please wait a week or so, busy to handling the SST lights.

    cdog, thanks.


  22. #442
    Flashaholic* SmurfTacular's Avatar
    Join Date
    Feb 2010
    Location
    Orange County, CA
    Posts
    705

    Default Re: Multi-Sink

    Do you ever plan on making more multisinks???

    I was just going to buy some!!!!

  23. #443
    Flashaholic* download's Avatar
    Join Date
    Jun 2005
    Location
    Sol 3
    Posts
    1,573

    Default Re: Multi-Sink

    cdog, item was sent.

    SmurfTacular, you got to be very patient to wait.

  24. #444
    Flashaholic* download's Avatar
    Join Date
    Jun 2005
    Location
    Sol 3
    Posts
    1,573

    Default Re: Multi-Sink

    A few more XP-G Orange peel metal reflector are added.

  25. #445
    Flashaholic Hill's Avatar
    Join Date
    Apr 2008
    Location
    MA
    Posts
    318

    Default Re: Multi-Sink

    Quote Originally Posted by download View Post
    A few more XP-G Orange peel metal reflector are added.
    Charles,

    Reflectors came today and I must say these are beautiful and create a nice pleasant beam with a well defined hot spot and ample spill (just the way I like it )

    The centering rings are a real bonus as well. Problem is (and this is my doing) my heatsink is not perfectly flat since I custom made it. I will need to disassemble the LE and grind the heatsink more. Not a big deal, but I very anxious to get this complete.

    Hill

  26. #446
    Flashaholic* download's Avatar
    Join Date
    Jun 2005
    Location
    Sol 3
    Posts
    1,573

    Default Re: Multi-Sink

    Hi Hill,

    If you could access the lathe, there will be easy to fix it.
    If not, suggest to mount your heatsink with your drill, it would be little help to make it level.

  27. #447
    Flashaholic Hill's Avatar
    Join Date
    Apr 2008
    Location
    MA
    Posts
    318

    Default Re: Multi-Sink

    Quote Originally Posted by download View Post
    Hi Hill,

    If you could access the lathe, there will be easy to fix it.
    If not, suggest to mount your heatsink with your drill, it would be little help to make it level.
    A lathe would be easy, but no access

    I'll just take it apart and grind it by hand - it's hard work but very satisfying when done - plus ends up being one-of-a-kind!

  28. #448
    Flashaholic* download's Avatar
    Join Date
    Jun 2005
    Location
    Sol 3
    Posts
    1,573

    Default Re: Multi-Sink

    Hand-lathe, mount your heatsink like that, it may help a little.

    Last edited by download; 06-10-2010 at 08:32 AM.

  29. #449

    Default Re: Multi-Sink

    Hello,
    I'd like to purchase :

    • G. 8x 7135 driver Multi-Mode -> 9$
    • Shipping -> 4$


  30. #450
    Flashaholic Hill's Avatar
    Join Date
    Apr 2008
    Location
    MA
    Posts
    318

    Default Re: Multi-Sink

    Quote Originally Posted by download View Post
    Hand-lathe, mount your heatsink like that, it may help a little.

    Interesting and creative. My heatsink does not have a center hole so it wouldn't work for my application. But nice idea!

Page 15 of 19 FirstFirst ... 58910111213141516171819 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •