FF3/FluPic can´t change UI

alex in germany

Newly Enlightened
Joined
Apr 27, 2006
Messages
156
Location
Germany/Bavaria
Hi,

i have a problem with my FF3 FluPic.

I can not change the UI anymore. Im stuck in UI 2.

I get, Low-high-strobe-SOS-set brightnes-nothing-nothing-nothing
When im doing that, an switch on again it starts with high, and then low. Turn on and of 8 times again, i still cant change UI but it will start with low -high again as usual.
Tryed a new battery, with the same result.

Is the FluPic down ? Anybody knows whats wrong, and how to fix it ?

Alex
 

yellow

Flashlight Enthusiast
Joined
Oct 31, 2002
Messages
4,634
Location
Baden.at
what kind of Flupic is this?

the last few UIs I am aware of should not have strobe - SOS - set brightness.
Also none has set brightness and then the 2 nothing.
Usually UI 2-5 should be the nothing and THEN the set brightness as 7th and change UI as 8th level
:thinking:
 

alex in germany

Newly Enlightened
Joined
Apr 27, 2006
Messages
156
Location
Germany/Bavaria
Hi,

This is what is written on the board:
"FluPic by GoldServe"
" PCB REV.2"

This is what i get:


Low-high-strobe-SOS-set brightnes-nothing-nothing-nothing

I can not change the UI.

Here is a pic of the FluPic
firflyflupicsr1.jpg


Alex
 

goldserve

Flashlight Enthusiast
Joined
Dec 13, 2004
Messages
1,822
Location
Toronto, Canada
Sorry for the lack of replies. I haven't even had time to sit down and think about flashlights. Doug requested some very minor changes in some of the newer FFIIIs so the interface may be ever so slighty different than V2.2. If you still can't get it to work, I can take a lot at it in about a month's time. Send me an e-mail at that time. Don't send it to me now cause i'll forget about it soon.
 
Top