Surefire Lego?

[jamesmtl514]

And the award for most over the top bombproof E1e goes tooooooooo.

[s85sss]

one of my favorite thread!

what is that switch?

[DM51]

what is that switch?

SureFire SW01.

Yours, in the pic above, is an SW02.

[s85sss]

in black?
looked like a copy...

[DM51]

Very good point! I haven't heard of a black SW01. That could be the photo, I suppose, but you are right - it definitely looks BK.

I think we'll need Size15's expertise and knowledge to resolve this one!

[Monocrom]

Very good point! I haven't heard of a black SW01. That could be the photo, I suppose, but you are right - it definitely looks BK.

I think we'll need Size15's expertise and knowledge to resolve this one!

Hope Al chimes in as well.

There might be another possibility though . . . It could be the momentary tailcap off of an old Solarforce L600 model. I have the light. (Piece of junk.) But the tailcap is actually excellent, and looks exactly like the one in the pic.

[jamesmtl514]

I remember him saying it was a solarforce tail a while back.

[Monocrom]

That's most likely it. I recall Solarforce made a clicky variation of the same tailcap design. It had a longer base than the momentary version though. The clicky was sold seperately, and was also a piece of junk. The excellent momentary version though was never sold as a seperate item and soon vanished when Solarforce stopped selling the L600 model.

Judging by the pic above, that's the shorter-base momentary tailcap.

[angelofwar]

I wanted it say it wasn't an SF, just by looking at the ano. It looks like "textured" type-II (meant to look like type-III).

[Eric242]

I remember him saying it was a solarforce tail a while back.

Liar I never said such a thing and never owned a Solarforce light

Actually it is not a SW01 but the switch of the G&P Scorpion R500. An exact copy of the SW01 slim, press for momentary - turn for constant on, just in black.

Eric

[Monocrom]

Liar I never said such a thing and never owned a Solarforce light

Actually it is not a SW01 but the switch of the G&P Scorpion R500. An exact copy of the SW01 slim, press for momentary - turn for constant on, just in black.

Eric

Yup, forgot about that. Solarforce and Ultrafire did blatantly rip off the G&P Scorpion model. Apparently even right down to the SureFire based tailcap.

[Kif]

Built this Lego recently
Surefire M2 matte black bezel + Moddoolar 2x18650 body + Z59 matte black tail cap + Malkoff M60 drip-in

[angelofwar]

Sexy Kif!

[LightJunk]

My Mini U2 Ultra.







Enjoy.
LJ

[angelofwar]

Nice Light Junk! And it actually powers up??? Is there a CR2 in there? Or a coin cell?

[angelofwar]

one of my favorite thread!





what is that switch?

Whoa! What bezel is that??? Looks liek a factory HA-Nat Z32. Was that from a weaponlight?

[LightJunk]

Thanks AOW.

Yup this baby lit up but more on the dimmer side. It uses 2 1616 lithium coin cell at 3V each.

[angelofwar]

Thanks AOW.

Yup this baby lit up but more on the dimmer side. It uses 2 1616 lithium coin cell at 3V each.

I guess when the zombies come and you burn thru all your primaries, you can scavenge coin cells and still have light! LOL! I've done this with an A21 and 1 primary, and was able to get light. SF legos...gotta love it!

[ElectronGuru]

Whoa! What bezel is that??? Looks liek a factory HA-Nat Z32.

To my knowledge there are three generations of the z32

The one shown above (snap in lens)
The 'ribbed' version
The current version

[angelofwar]

To my knowledge there are three generations of the z32

The one shown above (snap in lens)
The 'ribbed' version
The current version

Thanks EG...I've seen his version...I have two of them..but they're black...I've never seen a factory HA verion...plus, my black ones don't have that "dip" between the vertical grip like his does...this must be from a VERY early version of the M95Xxx I'm guessing??? Or an old pistol light???

[DaFABRICATA]

Thanks EG...I've seen his version...I have two of them..but they're black...I've never seen a factory HA verion...plus, my black ones don't have that "dip" between the vertical grip like his does...this must be from a VERY early version of the M95Xxx I'm guessing??? Or an old pistol light???

A.O.W. is correct.
The bezel is from the W-series 6 volt weaponlight, such as the W117 pistol light.
It looks really nice on a first generation HAIII round body 6P.

[Tana]

One of the best threads ever...



From left to right:

Nailbender XML U2 2x18500
EDC+ X60L T6 1x18650
Malkoff M61 2xCR123 (host from all genuine SF parts except for TnC E2C)
LX2 head 2xCR123 (host from all genuine SF parts)
Malkoff M91 2x17500 (host from all genuine SF parts except for bezel to allow no gap)

[Kestrel]

Hello, wait a minute. An LX2 with Z-series grip rings? That combines two of my three favorite SureFire features into a single light, what a great idea.

[Monocrom]

Hello, wait a minute. An LX2 with Z-series grip rings? That combines two of my three favorite SureFire features into a single light, what a great idea.

The LX2 head is over to your right. That's a Z44 bezel on that LX2 body.

[Tana]

Tell me about it... it's been my fav EDC for the past 5-6 days, I just swapped M61 with M61W for better tint...

What's your third favorite Surefire feature ??? Hope it's not CLICKY MODE...

[nein166]

Great thread can't believe I've missed it all these years
Time to play Lego



U2 modded with 4 xp-e, mh90, and solarforce tape switch with forward clicky

[Helmut.G]

Voila, the two-headed 9AN P60 LED conversion:






Running a warm-white XR-E direct drive + the incandescent low beam on 1xCR123+1xRCR123 (the big bulb is blown on that LA).
I didn't know how far I could go voltage wise until , 2xRCR123 would likely work as well, just didn't want to risk anything.

Using a DD drop-in because i suspect the bulb wouldn't be too fond of a regulated driver in series.

When running 1x18650 only the LED is lit up, the incan bulb glows slightly when the battery is 100% but fades away while current drops.

[nein166]

Wow Helmut.G thats like a Conjoined Heteropaternal superfecundation of Surefires

[Helmut.G]

I don't have any surefire turboheads but I think it would look cool with a KT3-Turbohead at the front and a KT1/2-TH at the back end.

[Eric242]

Equal rights to the people on both ends of the light: the one who´s getting the "usual" business end into the face as well as the one who´s holding the light are getting blinded

Definitly an interesting and unusual mod!

Eric