Surefire Lego?

[CLBME]

Here are a couple of mine thanks to TNC products and Bugsy714 for the C2. The E1e has a M31 in it and the C2 a M61. The TNC bezel is my first aftermarket bezel. It's awesome.

[cland72]

It's not the fluorescent yellow, but the flash in the 2nd pic made it look like it!

[jamesmtl514]

nice Chris. It almost tan in the first pic

[ficklampa]

Z41 tailcap, Z44 head and 3BL body. Lumens factory D26-LED (CREE XR-E R2) drop in. And a SF combat ring. A bit brigther than the 6PLD I have actually.

[cland72]

Poor man's M3

[CLBME]

Well my E1e and Z44 morphed into this................not sure if it still qualifies because there isn't any Surefire left. Thanks Oveready (Moddoolar slim body, P60 interface, triad tail) and TnC (Bezel)!

[TMedina]

Two part question:
1. Does anyone know of someone who modifies the old, stock pocket clips into the lanyard attachment points?
2. Does anyone know of anyone who makes aftermarket pocket clips for the old, stock clips? Perhaps the newer recurve clip in ti?

Thanks,
-Trevor

Eta: This lanyard modification was developed by McGizmo - posted to CPF. A link to the concept is here. Unfortunately, I don't have the equipment, tools, or skills to do it myself.

[T45]

Hmmm.....now that's an idea.

[T45]

My first Surefire Lego: 9P with a M2 Ribbed head.

[brucejiang]

the most difficult part in legoing is find a matching tailcap or bezel

the 4-Flat L1 seems do not qualify for a lego in this thread, however, the bezel is the latest 6th generation with 65/10lm output

[Solscud007]

My mini porky killer.

[warubozu]

Here are a couple of mine thanks to TNC products and Bugsy714 for the C2. The E1e has a M31 in it and the C2 a M61. The TNC bezel is my first aftermarket bezel. It's awesome.

What type of head is on the C2?

[archimedes]

What type of head is on the C2?

I believe that's the TnC bezel....

[CLBME]

Archimedes nailed in on the head..... It's made by Chris at TnC.

What type of head is on the C2?

I believe that's the TnC bezel....

[warubozu]

Thanks, some very cool SF legos in this thread.

[ficklampa]

Had to put the original 3BL-head on my lego since the Z44 almost crushed the drop in. Didn't want to risk damaging it if I dropped the light or overtightened it.

[eg1977]

[bouncer33441]

g2 body
cryos crenulated head
z58 clicky and cree xml dropin
soon to be a bored 6P or c2 body

[bouncer33441]

g2 body
cryos crenulated head
z58 clicky and cree xml dropin
soon to be a bored 6P or c2 body

AND I FORGOT I WILL ALSO ADD A TRIAD TAILCAP WITH EITHER A MCLICKY FETTIE OR ZERO REZ SO A A P60 TRIPLE OR QUAD CAN BE DROPPED IN

[Eisenhower]

Just have a normal E1D ... My favorite EDC ..

[cland72]

Has anyone done a Malkoff VME head & M61 on a Surefire A2L? I'm thinking the two stage switch would work well with it.

I really need to get my A2L bored for 17670. It's a great light, but I rarely use it since I'm running mostly rechargeables.

[Helmut.G]

I really need to get my A2L bored for 17670. It's a great light, but I rarely use it since I'm running mostly rechargeables.

off-topic here but have you seen the 16 mm diameter Li-Ions?
tested here: http://www.candlepowerforums.com/vb/...0mAh-%28Red%29

[Solscud007]

A new option for Lego. E1B-AA body by Fire Kylin. The E1B like head and tailcap are on the E1-BK body below.

[It01Firefox]

Has anyone done a Malkoff VME head & M61 on a Surefire A2L? I'm thinking the two stage switch would work well with it.

I tried a VME with M61w on my A2L last night and it worked fine with two levels. Unfortunately I don't have an MD2 with two stage ring, so I can' tell if the levels are the same.

[brucejiang]

my latest one

[RI Chevy]

Looks like the engraver needs to learn how to spell!

[red_hackle]

Just took a picture of the current state of my M2 lego lights...

[LE6920]

Just took a picture of the current state of my M2 lego lights...

Nice, what adapter are you using to get those M3 bezels on the C2 bodies? Details on bulb setup?

[red_hackle]

Nice, what adapter are you using to get those M3 bezels on the C2 bodies? Details on bulb setup?

This one has been assembled with a Surefire adapter that was removed from a KL3 head (before you order one to do the same, please note that these are glued and removal will not always work). The bezel is still in stock condition and runs a LED tower instead of a bulb.



This one uses a Leef adapter. It's actually without light engine at the moment - I am still undecided on the perfect setup and have a WTB out for another LED tower.

[cland72]

E1B body with E2DL tailcap and E2D head. Just need a Veleno Designs drop in to go with it...