Hyperion CE-R

[x2x3x2]

Review up with 14500, 16340 and AA runtimes since it also fits the C-LE AA tube. Enjoy

[ViReN]

Nice Review

Keep more coming

[twren1]

could you do runtime with cr123 some time.

[nanotech17]

nice.
Thank you teacher

[x2x3x2]

An update to the runtime for low mode.
The Eneloop AA cell which i used for low must have been faulty. I have since updated the review with the new runtimes. It shows proper performance with AA on low now

I've just finished a runtime with CR123 on high, will update once i've finished with medium and low modes as well.

[dc]

Hello, does the head fit the old C-LE tube or the version 1.2? Thanks.

DC

[x2x3x2]

The one i tested with was V1.2.

[nanotech17]

just for sharing
hyperion CE-R (left) vs p1dce q5 (right)
http://shw.fotopages.com/15544664.html

[ernsanada]

Review up with 14500, 16340 and AA runtimes since it also fits the C-LE AA tube. Enjoy

My head will not fit on my Jet Beam AA. Threads are different.

Left, Hyperion CE-R. Right, Jet Beam CL-E.



This is the version Jet Beam CL-E I have. Top, Hyperion CE-R. Bottom, Jet Beam CL-E

[x2x3x2]

I guess your's must be the C-LE V1.0 then?
The body I tested on was from a C-LE v1.2 [edited], threads were identical and fit perfectly.

[enLIGHTenment]

Is there visible PWM flicker under any circumstances?

[Nake]

I guess your's must be the C-LE V1.0 then?
The body I tested on was from a C-LE v2.0, threads were identical and fit perfectly.

In this picture the Hyperion has course threads and the C-LE fine threads. The C-LE tube might fit physically, but not properly. The threads on one or the other could get damaged.

[HiltiHome]

Is there visible PWM flicker under any circumstances?

To those that are very sensitive for PWM flickering, there is still a little flickering on low, but it's not noticeable in practical use.

No flickering on med, and no PWM on high.

mine measured :

med: 312Hz
low: 312Hz
high: no PWM
strobe: 7,6Hz

[HiltiHome]

I have the Hyperion and the Jetbeam C-LE-1.0

The Heads are not interchangeable, same reason as above, different threads.

[ideefixe]

Review up with 14500, 16340 and AA runtimes since it also fits the C-LE AA tube. Enjoy

Good review, x2x3x2. Thanks for pointing out that the Hyperion CE-R head fits the Jetbeam C-LE v1.2. I'm glad I killed my Jetbeam because now I can use the tube and run both AA and 14500 with the CE-R. This thing has way too many battery options:

1 x CR123A primary with 123 body
1 x RCR123 3.0v with 123 body
1 x RCR123 3.7v with 123 body
1 x AA primary with C-LE AA body
1 x AA rechargeable with C-LE AA body
1 x 14500 with C-LE AA body

Amazingly, all modes work with every option!