Wee Q4 NS & Titanium Purchase Thread.

[orb]

This thread is continued from HERE.

Wee Wearable Purchase information.
Wee NS & Wee Ti is now available to purchase.
The 1st 50 have all been dispatched to there new owners.
As the other Wee threads are more of a interest & progress detail. I figure it is best to start this new purchase thread with information here:

Specs:
Wee Nickel Silver Wee Titanium
Weight NS 20 Grams Ti 12 Grams
Length 34mm Min Dia 13mm Max Dia 15mm
Cree XR-E Q4 WG.
Custom Polished Reflector NS or Ti
Mineral glass window.
Double O-ring window protection
Water Resistant
Li-ion 10180 Cell 3.7 Volt 90 mAh.
Magnetic spacers supplied for charging in the CR123 Nano charger (Not Supplied) But can be purchased extra £6.
Single stage Twisty with option of 25 , 50 or 80 Lumen settings
Respective run times 1.5 hours , 1/2 Hour & 15 mins.
Two slots for 5-6mm Long 1.5mm Dia Optional Tritium locators.
BT Lanyard Supplied see here for instruction : http://www.youtube.com/watch?v=XY7qUHhbzkw

The Wee NS / Ti is available now in 25, 50 & 80 Lumen options.

Example order:

1 Wee NS 50. £35 (Wee Ti £75)
2 Ice Blue Locators £12
1 Extra 10180 Cell £5

UK Post £3
Or All International Outside UK Shipping £6
Total International £58 GBP

Please Send UK ££ Pounds Sterling GBP Only To Paypal Info@theorb.co.uk







ASAP These will be available also via www.lummi.co.uk

[hoppy1010]

Mine arrived today and it is sweet can't believe how small it is have to see to believe it. Rob has done it again very nice product. Awesome service as well.
Thanks Rob.

[Gizzy]

for

1x Wee NS 25 £35
2x Green Locators £12
magnets to fit the Nano AAA

International shipping £6
Total £53

[zigziggityzoo]

NS Wee received. Very cool little light. Unfortunately, still waiting on my charger (It got shipped to my other address :-\ from different dealer) so I can't use it until I get some charged batteries!

[BugOutGear_USA]

I know this was listed in one of the Wee threads but I can't seem to find it.


How do you thread the wire lanyard through the wee lanyard hole?

Thanks,
Flavio

[Gizzy]

here's the video for it...seems like the above link to it isn't working

Oh and for the Wee I used needle nose pliers to compress the tip of the loop small enough to shove it in the tiny hole then a toothpick to shimmy it in.

[alauda]

Paypal sent for:

1 Wee NS 50. £35
2 Ice Blue Locators £12
1 Extra 10180 Cell £5
UK Post £3

Total £55

[BugOutGear_USA]

here's the video for it...seems like the above link to it isn't working

Oh and for the Wee I used needle nose pliers to compress the tip of the loop small enough to shove it in the tiny hole then a toothpick to shimmy it in.

Got it...Thank you!

Regards,
Flavio

[Patriot]

Can we expect a Q5 Wee any time in the near future?

Thanks

[orb]

Can we expect a Q5 Wee any time in the near future?

Thanks

I still have a fair few Q4, But I will be placing a order for XR-E's in the next few weeks. I hope to obtain the highest bin available.

[ewchiu3]

I got my Wee Ti. As mentioned by many before it is tiny! What a great light!

[Sgt. LED]

When will these be for sale on a regular website, I don't like the post - paypal - wait - wait - wait, method too well!!!! I am impatient unfortunately

[Gizzy]

Well...if your impatient...your gonna hate waiting till Rob puts up the wee on the site...you might as well save yourself the wait time and post here - paypal - wait -wait..
rather than...wait - wait - wait - wait and wonder is he gonna update the site...

I got my Wee Ti last week and my NS is due to arrive tomorrow or day after...trust me Sgt Led your better off ordering on this thread if you want it sooner rather than later.

[Sgt. LED]

Good Point......

[orb]

The Wee NS & Wee Ti will be on the Lummi site shortly. The web site is being updated this week.

[olrac]

let me know when a Q5 wee is available to order!

Maybe a new name.... Rentina terminator...alll'll be bright.

[Dobbler]

My Ti arrived today. Very cool.

The threads are more loose than my NS -- It takes almost no force to twist and could easily twist in my pocket. What should I do to tighten up the threads? A heavy grease?

[Gizzy]

My Ti arrived today. Very cool.

The threads are more loose than my NS -- It takes almost no force to twist and could easily twist in my pocket. What should I do to tighten up the threads? A heavy grease?

Weird...my NS is pretty smooth but not even close to twisting off on its own...my Ti tho is pretty rough tho and requires much more force to turn on (specially right before the light turns on) no amount of lube has helped... I'm hoping it will slowly break in

[TranquillityBase]

Nice lights, great pics too...

Go T-Touch, love that watch...I have the first generation, without the degree ring, just the N-S-E-W, wish mine had the orange dial.

[Dobbler]

Weird...my NS is pretty smooth but not even close to twisting off on its own...my Ti tho is pretty rough tho and requires much more force to turn on (specially right before the light turns on) no amount of lube has helped... I'm hoping it will slowly break in

That's a better description of my Ti too, but I would say the threads are too "slick" until that one sticking point.

It's a beautiful light and I'm sure it will be just fine

[olrac]

Rob,
Any chance of a WEE DA in the future? If yes put me down for one.

[Dobbler]

Rob,
Any chance of a WEE DA in the future? If yes put me down for one.

What does DA stand for?

[ah-see]

What does DA stand for?

Damascus.

[Dobbler]

Damascus.

So the Wee DA would be a Syrian model?

Ok, so what is a Damascus version?

[olrac]

So the Wee DA would be a Syrian model?

Ok, so what is a Damascus version?

the body is made of Damascus steel similar to what is used in knives and swords. very patterned due the manufacturing process.

[Mad1]

I'm interested but is there any beam shots (indoor or outdoor) of either the 25 or the 50?

Cheers.

[iconoclast]

Ok, so what is a Damascus version?

Example of Raw in Damascus can be seen here...
http://candlepowerforums.com/vb/show...120893&page=13

[Dobbler]

Example of Raw in Damascus can be seen here...
http://candlepowerforums.com/vb/show...120893&page=13

Very cool looking. But what would the weight difference be?

[SteveStephens]

Very cool looking. But what would the weight difference be?

RAW Da is close to 1-1/2 oz. and RAW NS close to 1-1/8 oz, both with battery.

Steve

[JohnnyDeep]

Dobber:

If the threads feel too loose, a really sticky so called dampening or helical grease can do wonders. This is the kind of grease used in the helical gears of camera lenses and the gear trains of microscopes, among other things.
I have found Nyogel # 767A to be perfect for this. This is a silicon based grease that is O-ring safe. The 767A saved another little Ti light for me with much too loose feel in the threads from the beginning. That one now is absolutely perfect.
When titanium threads are too rough, I use either Krytox 50/50 or MD Labs XF7 (my favourite most of the time).