Battery Junction
Page 1 of 9 12345678 ... LastLast
Results 1 to 30 of 259

Thread: **Great News**Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

  1. #1

    Arrow Sales thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    Ok I finally have some Tri-Flupics and Piglets. I didn't get enough for myself, but I will fulfill my obligation in this thread to all posts before this one. If you want to post interest in case there is another run, then please do post.

    Piglet
    I have a handful of 0.55" sammie sized piglet buck/boost boards with more coming. These are the original custom sammie sized buck/boost multi level boards for Li-ion and CR123 (3v-3.6v). These fit TnC Canisters, Aleph LE, etc. The ones I have now are 50/500mA with the simplified UI listed below. These will run under full regulation for both CR123s and Li-ions. Also I have 150/800mA boards coming that will run in full regulation for Li-ions, but are not suited for CR123s to reach the full 800mA under regulation, but they still work.

    Piglets:
    // UI 1 - LOW - HIGH - LOW - HIGH - LOW - HIGH - OFF - SET_UI
    #rom 0x2110 = {0, 1, 0, 1, 0, 1, 6, 7}
    // UI 2 - HIGH - LOW - HIGH - LOW - HIGH - LOW - OFF - SET_UI
    #rom 0x2120 = {1, 0, 1, 0, 1, 0, 6, 7}
    // UI 3 - (LOW) - (HIGH) - STROBE - BEACON - OFF - OFF - SET_UI
    #rom 0x2130 = {0, 1, 3, 9, 6, 6, 7, 0}
    // UI 3 - (LOW) - (HIGH) - STROBE - BEACON - OFF - OFF - SET_UI
    #rom 0x2138 = {1, 0, 3, 9, 6, 6, 7, 0}
    // UI 4 - LOW - HIGH - STROBE - BEACON - OFF - SET_UI
    #rom 0x2140 = {0, 1, 3, 9, 6, 7, 0, 0}
    // UI 5 - STROBE - HIGH - LOW - SOS - OFF - SET_STROBE - SET_UI
    #rom 0x2150 = {3, 1, 0, 4, 6, 8, 7, 0}

    Tri-Flupic
    Almost all the Tri-Flupics are the standard UI, but I may have some simplified custom versions. I have a few with the GregW interface from the Exollion and some Bogus1 programmed boards as well. My boards start on high, as that is how Chris and I run our lights. When you need bright light, you need it now. You can always set the light to low at your leisure. I know, I know, some guys just use their lights differently and thus the standard UI or perhaps the GregW UI.

    The Standard FLuPIC operating guide.

    Bogus1 program:
    User Mode 1: burst> level 1> tactical strobe> Level 2> 3 second beacon>15 second beacon>SOS> set mode

    User Mode 2: set level > set strobe >set mode, 800ms

    The second interface goes back to the first. This makes it simpler and keeps me from getting lost This means that when in mode 2, after the 800ms lapses, if you turn the light off and then on again it will start on burst (high). It jumps from Mode 2 to Mode 1. In effect this means there is really only one user mode and one level setting mode. Beacon brightness is set by Level 2.

    I'm selling the Piglets for $40 and the Tri-Flupics for $40 each. Shipping is $3 for USPS delivery confirmation and $6 for priority. My cash paypal (only) is Catsndog AT Inreach Dot Com
    Please post your CPF name and what you are ordering and it will help to post in this thread for me to track cash orders. I won't begin shipment until Friday or Saturday.

    If you are using a Credit Card for payment, I will post the Flupics on our TnC Online Store, specifically at LEDs, Drivers & Supplies either Friday or Saturday. I won't begin shipping until Friday or Saturday.
    If you order online, please include your CPF name in the notes. The rest is automatic. Please only order if you are on the list.

    I also have at the store:
    Flupic converter version 2.2 Standard Sammie 0.55"
    Flupic converter version 2.2 Standard Sammie 0.55" 1amp burst
    Flupic converter version 2.2 Standard UI 0.6" for Fenix

    [Sales Spiel mode on] I want to point out a few advantages of the Flupics as I see them. Some claim the program is complicated. There are custom simple Flupic programs, and the UI was developed under extensive CPF user input.

    When I take a look at what lights many seem to be buying, they have imported lights each with its own complicated different program. When I look at sig lines I wonder how someone works all those different UIs. With the Flupic, you have the option of using ALL your LED lights with the exact same program because of the various Flupic sizes available. That makes it worth investing the time to learn a program and then a real benefit can be reaped. Otherwise it's like having your pants down, or worse, if you can't work your light. You could have a Jillite Flupic, a Fenix Flupic, and an Icarus or Mac Custom with a Tri-Flupic. All your lights could work the same. Or you could have from a TnC N cell; all the way to a C size Li-ion with multi emitters (coming) and all your lights could behave the same. This is a unique advantage the Flupic offers. It's worth a thought IMO. This is how I use my lights.

    Another advantage of the Tri-Flupic from my view, is that the LEDs aren't in series so if one LED goes out, they don't all die. Also the Vf of the LED isn't critical like running LEDs in parallel since they are driven independently. Of course it is nice to run 3x LEDs off a single Li-ion, rather than require higher voltage. I believe there are other advantages, but I haven't fully explored them yet. [Spiel off]

    I've copied the interest list from this thread to this first post below:

    Norm – Tri Flupic
    NetKidz - Tri Flupic PAID
    AndyTiedye - (3x) Tri Flupic PAID
    datiLED - Tri Flupic
    Nebula - (2x) Tri Flupic, Piglet Flupic PAID
    J.D. - Flupic (2x) PAID
    Jwl - Tri Flupic
    X Marine - Tri Flupic (2x), Flupic (2x), Piglets (2x) Arc-Q3 (2x), Jil (2x)
    Russki - Tri Flupic PAID
    Ledean - (2x) Tri Flupic PAID
    Walt175 - Tri Flupic (2x)
    PhotonAddict - Tri Flupic PAID
    Cryhavoc - Tri Flupic
    TranquillityBase – (3x) Tri Flupic, .770” PAID
    flex76itlay - Tri Flupic
    Gizzy - ?(currently convinced that saying "i love you" is enough)?
    plasmaman - Tri Flupic (2x)
    Gmoney - Tri Flupic (2x) PAID
    acourvil - (2x) Tri Flupic, Flupic w/ burst set at 1amp, 10.55mm, PAID
    Sancho886 Tri Flupic PAID

    Totals:
    Flu pic 6
    Tri Flupic 31
    Piglets 4
    Arc-Q3 (.77) 3
    10.5mm 3 (same as Jill)
    Last edited by Bogus1; 05-13-2008 at 12:00 AM. Reason: change to sales thread

  2. #2
    Banned Groundhog66's Avatar
    Join Date
    Jan 2007
    Location
    Bay Area, CA
    Posts
    2,860

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    .770


  3. #3
    Retired Administrator Norm's Avatar
    Join Date
    Jun 2006
    Location
    Gippsland Australia
    Posts
    8,858

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    Interested in Tri Flupic.
    Norm

  4. #4
    Flashaholic*
    Join Date
    Jun 2006
    Location
    Taiwan
    Posts
    569

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    Definitely interested in Tri-FluPic.

    Thanks.

  5. #5
    Flashaholic* AndyTiedye's Avatar
    Join Date
    Oct 2006
    Location
    Santa Cruz Mountains
    Posts
    2,034

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    Interested in some Tri-Flupics.

  6. #6
    Flashaholic* datiLED's Avatar
    Join Date
    May 2006
    Location
    Atlanta, GA
    Posts
    1,459

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    Interested in Tri Flupic for bicycle light project.
    Until further notice, I am not accepting new mod requests.

  7. #7
    Flashaholic*
    Join Date
    Sep 2006
    Location
    Northern Virginia
    Posts
    993

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    Eric - I am interested in a Tri-Flu, and in hearing more about your ucoming tri-rebel set up. Kirk

  8. #8
    Flashaholic J.D.'s Avatar
    Join Date
    Dec 2006
    Location
    Bavaria :)
    Posts
    143

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    i´d take at least 2x 0.55"

  9. #9
    *Flashaholic* easilyled's Avatar
    Join Date
    Jun 2004
    Location
    Middlesex, UK
    Posts
    5,456

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    Sorry if its off topic but if you offer a turnkey light with tri-flupic
    and tri-rebel canister in a relatively small format, I'm sure I would
    take it.
    Change is inevitable, except from a vending machine

  10. #10

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    easyled and Nebula, discussions about our products for the time being are taking place on the TnC Online Store thread. I've posted pictures of a few candidate hosts. We will make something somewhat small, but unless using an optic the result could be flood or excessive flood. Chris is considering building reflectors just for these though so we will see.

  11. #11
    Flashaholic jwl's Avatar
    Join Date
    Nov 2005
    Location
    Kansas
    Posts
    307

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    Interested in the Tri-Flupic(s).

  12. #12

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    I went nuts when I put off grabbing some during his sale. But I just couldn't find the time to get an order in.
    Be interested in some .55, Tri-Flupic, Arc-Q3, Jil, and Piglets. Prolly 2 ea.

    And plz add me to any list if exist for a shot at the limited pieces.

    ThanX
    X..
    So much to learn, so little time.. ')
    DFW Texas Spring Fling CPF and LPF Flashapalooza, TBA? ')

  13. #13
    Flashaholic Russki's Avatar
    Join Date
    Oct 2006
    Location
    New York
    Posts
    394

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    Tri-Flupic and Piglets
    Please

  14. #14
    Flashaholic*
    Join Date
    Dec 2003
    Location
    Georgia
    Posts
    847

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    Great to see these boards being made available again.
    The boards I got from you last time work well.
    I am interested in the triflupic of course..

  15. #15
    Flashaholic*
    Join Date
    Dec 2005
    Location
    Clifton, NJ
    Posts
    641

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    Been looking for Tri-Flupics for a long time. I would take at least 2 of them!

  16. #16

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    As I just mentioned in this thread I've restocked 0.55" flupics.

  17. #17
    Flashaholic* PhotonAddict's Avatar
    Join Date
    Dec 2004
    Location
    Mtl, Canada
    Posts
    357

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    Interested in a Tri-Flupic and probably a piglet

  18. #18
    Flashaholic
    Join Date
    Mar 2006
    Location
    Oklahoma City, OK
    Posts
    213

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    No interest for the do it you're self kit. But I will buy a comleted head for my leggo collection.
    Rob

  19. #19
    Flashaholic ledvador's Avatar
    Join Date
    Oct 2004
    Location
    Land of Eiffel Tower
    Posts
    87

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    Interested for Exolion and Arc LS size with default programing for Luxeon Rebel emiter.
    Last edited by ledvador; 09-18-2007 at 06:10 AM.

  20. #20
    Flashaholic* cryhavok's Avatar
    Join Date
    Nov 2005
    Location
    Orlando, FL
    Posts
    871

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    Tri-FluPIC for me

  21. #21

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    Tri-FluPIC, and .770"

  22. #22

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets



    Checking to see if there is more interest.

  23. #23
    Flashaholic*
    Join Date
    Sep 2006
    Location
    Northern Virginia
    Posts
    993

    Popcorn Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets


  24. #24
    Flashaholic*
    Join Date
    Dec 2003
    Location
    Georgia
    Posts
    847

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    I am sure the interest is more than the amount of posts .

    Anyway thanks for doing this Bogus .




    Quote Originally Posted by Bogus1 View Post


    Checking to see if there is more interest.

  25. #25

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    I sent an email today seeing if I could get an update. We exchanged emails a few weeks back but I didn't have any updates to post. I'll post when I do. Thanks
    Last edited by Bogus1; 10-29-2007 at 10:59 PM.

  26. #26

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    The good news is that I will be ordering more 0.55", 0.6", and 10.5mm boards very soon.

    GS is also working on some piglets buck/boost two level boards with strobe, beacon etc. and these should be available for 0.55" standard sammie size. The drive levels won't be avialable for custom ordering. Any input on the output? Low could be as low as 50mA and high up to 850mA with a li-ion. For primaries it should be around 500mA for a high.

    I don't have traction on the tri-flupics yet however. I am still working on this Perhpas a little in this thread would motivate him? I can't say. I am not sure if this means there won't be the 0.77" boards available as well.

    Anyhow, it's not too late to express more interest or give input for any of these boards. thanks

  27. #27

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    Tri-Flupic

  28. #28
    Flashaholic*
    Join Date
    Dec 2005
    Location
    Clifton, NJ
    Posts
    641

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    Tri flupic, tri flupic, tri flupic, Cmon everybody join in!!
    Tri flupic, tri flupic, tri flupic!!!

  29. #29
    Flashaholic*
    Join Date
    Dec 2003
    Location
    Georgia
    Posts
    847

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    Tri flupic !!!

    Quote Originally Posted by Walt175 View Post
    Tri flupic, tri flupic, tri flupic, Cmon everybody join in!!
    Tri flupic, tri flupic, tri flupic!!!

  30. #30
    Flashaholic* PhotonAddict's Avatar
    Join Date
    Dec 2004
    Location
    Mtl, Canada
    Posts
    357

    Default Re: Flupic interest thread for Tri-Flupic, Fenix, Arc-Q3, Jil, and Piglets

    Tri-flupic!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •