Acebeam        
Page 1 of 20 1234567811 ... LastLast
Results 1 to 30 of 572

Thread: Mag D Incan Driver - Soft Start & Multi-Brightness

  1. #1
    Flashaholic
    Join Date
    Oct 2004
    Location
    Hong Kong
    Posts
    33

    Lightbulb Not Available - Mag D Incan Driver - Soft Start & Multi-Brightness

    Introducing the Mag D Incan Driver with soft starting feature, 3 brightness settings and flashing mode. This driver assembly is a complete drop-in to replace the stock Mag D switch. The all metal switch housing is built with a high temp. KIU bi-pin socket and the driver board enclosed within. Great for running hotwire super bulbs for up to 150W ( 200W intermittent use ). Input voltage can be as high as 30V ( max. pack open voltage ). Runtime can be extended according to your brightness setting. ( Note : This driver does not have output voltage regulation yet ).

    Specifications:

    - Soft Starting to prolong bulb life and ease the amperage draw on the batteries during power up;
    - 3 brightness level ( PWM controlled ) - 30% - 60% - 100%;
    - Last brightness setting memory ( default level - 30% );
    - Flashing mode;
    - Simple UI ( click - ON ( low ) - Med - High - click & hold anytime - OFF - click & hold 1.5 seconds - Flashing );
    - Input voltage from 6V - 30V Max. open voltage ( Vin = Vout );
    - Drive bi-pin hotwire bulbs up to 150W ( 200W intermittent use );
    - Full alum./brass housing to withstand heat and better heat sinking;
    - Power efficiency 99%;
    - slightly recessed push button to prevent accidental power on;
    - comes with 10mm, 15mm, 20mm brass posts and washers for different height bulbs.


    Here is couple video clips of how the driver works :

    Incan Smart Driver Video Clip 1


    Incan Smart Driver Video clip 2


    Special Notes :

    1) Works with both cam and camless reflector
    2) No Soft start for ' Flashing Mode '
    3) The PCB mount push button has no momentary
    4) Alum. reflector and glass lens required
    5) Standby power drain of the circuit is approx. 80uA
    6) Total internal resistance is < 30mOhm ( according to data sheets of components ).
    7). Do not press the button switch too hard, a slight press will operate all the functions.














    Installation is simple. Remove the stock switch with a hex key ( 2mm ) and slide it out from the rear




    Insert the Driver Switch in and align the switch button to the center. Use the same hex key to tighten the hex screw. You may want to move back and forth a couple times on the last turn to make sure the screw pierce through the anodizing for a good contact








    Price : $75.00 each ( ALL SOLD)

    Shipping : $6.00 by Registered Mail


    PayPal : awwan01@yahoo.com
    Last edited by AW; 02-12-2014 at 07:54 PM. Reason: Stock status (All Sold)


  2. #2
    Flashaholic SunnyQueensland's Avatar
    Join Date
    Apr 2007
    Location
    Brisbane, Australia
    Posts
    463

    Default Re: Mag D Incan Driver - Soft Start & Multi-Brightness

    Wow.

    Does the copper colored plate that the posts attach to unscrew so the socket wires can be soldered and unsoldered?

    Not-so-Subliminal Message --->
    You want to sell me your ARC6

  3. #3
    Flashaholic
    Join Date
    Feb 2006
    Location
    The boat house in Hereford, UK
    Posts
    383

    Default Re: Mag D Incan Driver - Soft Start & Multi-Brightness

    I gotta be the first! woohoo - here at last, thanks AW!!

    2 please AW.

    PP incoming.

  4. #4
    Flashaholic
    Join Date
    Oct 2004
    Location
    Hong Kong
    Posts
    33

    Default Re: Mag D Incan Driver - Soft Start & Multi-Brightness

    The socket wires are soldered to the circuit board and you don't need to do anything about them. To replace posts with different length, you only need to unscrew the M3 screws on the socket and unscrew the posts. Replace with different length posts / spacers and that's it.

    Quote Originally Posted by SunnyQueensland View Post
    Wow.

    Does the copper colored plate that the posts attach to unscrew so the socket wires can be soldered and unsoldered?


  5. #5

    Default Re: Mag D Incan Driver - Soft Start & Multi-Brightness

    WOW!!

  6. #6
    Flashaholic*
    Join Date
    Sep 2006
    Location
    Northern Virginia
    Posts
    993

    Default Re: Mag D Incan Driver - Soft Start & Multi-Brightness

    AW- I will take 1. PP shortly. Thanks sooooooo much for bringing these to market. I look forward to the regulated version.

    Kirk

    Edit: AW - for Soft starter and a few extras. Thanks. Kirk
    Last edited by Nebula; 10-13-2007 at 10:35 PM.

  7. #7
    *Flashaholic* LuxLuthor's Avatar
    Join Date
    Nov 2005
    Location
    CT
    Posts
    10,406

    Default Re: Mag D Incan Driver - Soft Start & Multi-Brightness

    AW, thanks for an early Christmas present. I have many uses for these, as well as the regulated version, and wanted to thank you for all your testing and feedback with these!

    2 Drivers $158 sent!

    Last edited by LuxLuthor; 10-13-2007 at 08:44 PM.

  8. #8
    Flashaholic* missionaryman's Avatar
    Join Date
    Oct 2005
    Location
    Sydney, Australia
    Posts
    955

    Default Re: Mag D Incan Driver - Soft Start & Multi-Brightness

    AW - will there be an ouput voltage regulated version?
    "Let your light shine" - it's the one commandment we all obey...

  9. #9
    Flashaholic
    Join Date
    Feb 2006
    Location
    The boat house in Hereford, UK
    Posts
    383

    Default Re: Mag D Incan Driver - Soft Start & Multi-Brightness

    thanks Andrew!

  10. #10
    *Flashaholic* LuxLuthor's Avatar
    Join Date
    Nov 2005
    Location
    CT
    Posts
    10,406

    Default Re: Mag D Incan Driver - Soft Start & Multi-Brightness

    Quote Originally Posted by missionaryman View Post
    AW - will there be an ouput voltage regulated version?
    MM, yes and it has been discussed in this thread.

  11. #11
    Enlightened -FX-'s Avatar
    Join Date
    Oct 2005
    Location
    Minden, Germany
    Posts
    7

    Popcorn Re: Mag D Incan Driver - Soft Start & Multi-Brightness

    Very nice! Im in for 1x !

    Thanks AW

  12. #12
    Flashaholic
    Join Date
    Aug 2005
    Location
    Cupertino, CA
    Posts
    341

    Default Re: Mag D Incan Driver - Soft Start & Multi-Brightness

    for 1. (to start with )

  13. #13
    Flashaholic DMC's Avatar
    Join Date
    Nov 2006
    Location
    Austin
    Posts
    175

    Default Re: Mag D Incan Driver - Soft Start & Multi-Brightness

    Paypal from DMC sent for:

    2 Mag D Incan Driver - $150.00
    Shipping - $ 7.50
    ----------------------------------
    Total - $157.50


    Thanks AW!

  14. #14

    Default Re: Mag D Incan Driver - Soft Start & Multi-Brightness

    I will take 2

    PP sent for 157.50

  15. #15
    Flashaholic* iapyx's Avatar
    Join Date
    Jan 2007
    Location
    Close to the North Sea
    Posts
    739

    Default Re: Mag D Incan Driver - Soft Start & Multi-Brightness

    Quote Originally Posted by jefft View Post
    for 1. (to start with )
    Now that is what I call a soft start
    Last edited by DM51; 25 years ago at 11:54 PM. Reason: because I can
    Post your UB3T serial# here: http://www.candlepowerforums.com/vb/...try&highlight=

  16. #16
    Flashaholic
    Join Date
    Feb 2006
    Location
    Mesa, Arizona
    Posts
    83

    Default Re: Mag D Incan Driver - Soft Start & Multi-Brightness

    I will take one, paypal coming!

    for $81.00.

    Thanks for doing these. What is the timeline for the regulated version?
    Last edited by David1; 10-15-2007 at 09:52 PM.

  17. #17

    Default Re: Mag D Incan Driver - Soft Start & Multi-Brightness

    I have been waiting for a long time for this, thanks AW!

    2 Mag D Incan Driver - $150.00
    Shipping - $ 7.50
    __________________________

    Total - $157.50


  18. #18
    Flashaholic* iapyx's Avatar
    Join Date
    Jan 2007
    Location
    Close to the North Sea
    Posts
    739

    Default Re: Mag D Incan Driver - Soft Start & Multi-Brightness

    Ok, I'll bite:
    for one Mag D Incan Driver: 81 USD

    iapyx

    for a 2nd Mag D Incan Driver: 76,50 USD

    thanks,
    iapyx
    Last edited by iapyx; 10-18-2007 at 04:19 AM. Reason: added 2nd payment
    Last edited by DM51; 25 years ago at 11:54 PM. Reason: because I can
    Post your UB3T serial# here: http://www.candlepowerforums.com/vb/...try&highlight=

  19. #19

    Default Re: Mag D Incan Driver - Soft Start & Multi-Brightness


    for one D Driver

  20. #20
    *Flashaholic* LuxLuthor's Avatar
    Join Date
    Nov 2005
    Location
    CT
    Posts
    10,406

    Default Re: Mag D Incan Driver - Soft Start & Multi-Brightness

    I can't get these soon enough! More will buy.

  21. #21
    Flashaholic* Bob_G's Avatar
    Join Date
    Apr 2005
    Location
    Kentucky, USA
    Posts
    682

    Default Re: Mag D Incan Driver - Soft Start & Multi-Brightness

    for one
    There is but one life.
    God breathes through the scuttling cockroach
    and the soaring hawk.
    And yet, I am not a cat person.

  22. #22
    Flashaholic
    Join Date
    Aug 2006
    Location
    Central VA
    Posts
    203

    Default Re: Mag D Incan Driver - Soft Start & Multi-Brightness

    PayPal is on the way for one of these. Thanks AW!

  23. #23
    Flashaholic strideredc's Avatar
    Join Date
    Dec 2006
    Location
    UK
    Posts
    372

    Default Re: Mag D Incan Driver - Soft Start & Multi-Brightness

    AW,

    for one...at the moment!!!

    thanks

    m

  24. #24
    Flashaholic
    Join Date
    Oct 2004
    Location
    Hong Kong
    Posts
    33

    Smile Re: Mag D Incan Driver - Soft Start & Multi-Brightness

    *** I 'll ship this 10 units out within 12 hours. The rest of the paid orders will follow within a few days. Thanks!!! ***




  25. #25
    *Flashaholic* LuxLuthor's Avatar
    Join Date
    Nov 2005
    Location
    CT
    Posts
    10,406

    Default Re: Mag D Incan Driver - Soft Start & Multi-Brightness


  26. #26

    Default Re: Mag D Incan Driver - Soft Start & Multi-Brightness

    for one D Driver
    AW

  27. #27
    Flashaholic
    Join Date
    Oct 2004
    Location
    Hong Kong
    Posts
    33

    Smile Re: Mag D Incan Driver - Soft Start & Multi-Brightness

    Orders shipped ( in the order of PP rec'd ) for :

    plasmaman
    Nebula
    LuxLuthor
    -FX-
    jefft
    DMC
    ar_wanton

    Thanks!
    AW


  28. #28
    Flashaholic
    Join Date
    Oct 2004
    Location
    Hong Kong
    Posts
    33

    Smile Re: Mag D Incan Driver - Soft Start & Multi-Brightness

    Following orders have been shipped :

    iapyx
    David1
    nitere
    sacredsucculent
    Bob_G
    cbdudley
    strideredc
    fernando

    *** All paid orders have been shipped. I have more available ***


  29. #29
    Enlightened
    Join Date
    Jan 2007
    Location
    NC
    Posts
    86

    Default Re: Mag D Incan Driver - Soft Start & Multi-Brightness

    AW,
    I'll add three of these unregulated softstarters to my parts collections where at least two will not stay very long.
    PP on the way
    Thanks,
    Racer7

  30. #30
    Flashaholic nitnapz's Avatar
    Join Date
    Jun 2007
    Location
    Toronto, ON
    Posts
    349

    Thumbs up Re: Mag D Incan Driver - Soft Start & Multi-Brightness



    these are really nice little switches. i have one in my 2C 5761 and it simply amazes me and everyone who has touched the queen.. And this probably the best thing since sliced bread. I don't think that anyone has witnessed such a transition through functions on the softstart and multi-stage on an incandescent, especially on high output applications, without compromising switch space.


Page 1 of 20 1234567811 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •