• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired Milkyspit modded KL6 (SOLD)

skalomax

Flashlight Enthusiast
Joined
Apr 16, 2006
Messages
2,895
Location
Southern California
I have a mint condition Milkyspit modded Surefire KL6.

The KL6 hosts a K2 TFFC emitter with a nice tint. It's been driven at 1000mA (SOB1000), and has some serious throw.

Everything as received.

(HEAD ONLY - $245 )
Will ship anywhere in the world for $5 more.

picture016bv2.jpg
 
Last edited:

skalomax

Flashlight Enthusiast
Joined
Apr 16, 2006
Messages
2,895
Location
Southern California
Re: Milkyspit modded KL6

Donn_, It's yours.

I'll send a PM for PP a little later.


Thanks for your purchase.

I have the body If interested.
 

donn_

Flashaholic
Joined
Oct 10, 2007
Messages
8,067
Location
Great South Bay, LINY
Re: Milkyspit modded KL6

I'll probably take the body as well, if it's minty and reasonable, although I like the way it looks on an M6-Stretch:

011-3.jpg


:crackup:

Edited to add: I see you went ahead and listed the body on the MarketPlace. :confused:
 
Last edited:

dizzy

Flashlight Enthusiast
Joined
Dec 13, 2004
Messages
1,024
Location
pennsylvania
Re: Milkyspit modded KL6

I'll probably take the body as well, if it's minty and reasonable, although I like the way it looks on an M6-Stretch:

011-3.jpg


:crackup:

Edited to add: I see you went ahead and listed the body on the MarketPlace. :confused:
I spy an XTN-36 in there, right before the tailcap. I wish I had a use for mine.(2):(

What cells do you run in that light?:)
 

Mags

Flashlight Enthusiast
Joined
Oct 16, 2004
Messages
2,096
Location
NY
Re: Milkyspit modded KL6

Skalo since you have experience with several milkymods i was wondering if you thought this one was brighter and threw farther than Milky's seoul modded KL6.
 

skalomax

Flashlight Enthusiast
Joined
Apr 16, 2006
Messages
2,895
Location
Southern California
Re: Milkyspit modded KL6

Skalo since you have experience with several milkymods i was wondering if you thought this one was brighter and threw farther than Milky's seoul modded KL6.

Sorry for the delay.
I have never had a Modded KL6, but did have a KL5 Seoul.
The KL6K2T absolutely destroys in throw and tint.
 

petrev

Flashlight Enthusiast
Joined
Jun 12, 2005
Messages
1,535
Location
SW England
Re: Milkyspit modded KL6

I spy an XTN-36 in there, right before the tailcap. I wish I had a use for mine.(2):(

What cells do you run in that light?:)

Hi Dizzy

I guess you never got your AWR-HDM6s then !

:sigh:

You could fit 2x these KaiDomain protected 5000mAh D-Lions
http://www.kaidomain.com/WEBUI/ProductDetail.aspx?TranID=4141

or 1xpack of 2xD in one
http://www.kaidomain.com/WEBUI/ProductDetail.aspx?TranID=3985

or any other D-Lions !!!!

Use the standard tail-insert and a C/D-Mag spring or similar to fit length.

Carefully does it though as I haven't tested this personally - Hot cells might be too much for an MN21 !
I have used 2x AW-CLions with the MN21 and PH 5761 and they seem fine.

Cheers
Pete
 
Last edited:

donn_

Flashaholic
Joined
Oct 10, 2007
Messages
8,067
Location
Great South Bay, LINY
Re: Milkyspit modded KL6

The KL6 arrived today, and is temporarily sitting on an M3T tube with an SWO2 tailcap.

It's got a great spot on the wall with 2x 17500 cells. Can't wait for dark!

:thanks:
 

Groundhog66

Banned
Joined
Jan 23, 2007
Messages
2,860
Location
Bay Area, CA
Re: Milkyspit modded KL6

The KL6 arrived today, and is temporarily sitting on an M3T tube with an SWO2 tailcap.

It's got a great spot on the wall with 2x 17500 cells. Can't wait for dark!

:thanks:

I am running mine on 3xRCR123, very impressive light. Brightness doesn't blow me away, but the overall beam quality is absolutely superb.:twothumbs
 

dizzy

Flashlight Enthusiast
Joined
Dec 13, 2004
Messages
1,024
Location
pennsylvania
Re: Milkyspit modded KL6

Hi Dizzy

I guess you never got your AWR-HDM6s then !

:sigh:

You could fit 2x these KaiDomain protected 5000mAh D-Lions
http://www.kaidomain.com/WEBUI/ProductDetail.aspx?TranID=4141

or 1xpack of 2xD in one
http://www.kaidomain.com/WEBUI/ProductDetail.aspx?TranID=3985

or any other D-Lions !!!!

Use the standard tail-insert and a C/D-Mag spring or similar to fit length.

Carefully does it though as I haven't tested this personally - Hot cells might be too much for an MN21 !
I have used 2x AW-CLions with the MN21 and PH 5761 and they seem fine.

Cheers
Pete

HEY Pete!!!

Nope, I never got the HDM6. Maybe someday!!!

Good to hear from you again. Thanks for the D- size tips.

I'll PM you with some questions.:)
 

petrev

Flashlight Enthusiast
Joined
Jun 12, 2005
Messages
1,535
Location
SW England
Re: Milkyspit modded KL6

HEY Pete!!!

Nope, I never got the HDM6. Maybe someday!!!

Good to hear from you again. Thanks for the D- size tips.

I'll PM you with some questions.:)

Cheers Dizzy
Speak Soon
 
Top