• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired 1D 4AA M*g By FIVEMEGA

Status
Not open for further replies.

fivemega

Flashlight Enthusiast
Joined
Jan 28, 2003
Messages
5,522
Location
California
(CLOSED) 1D 4AA M*g By FIVEMEGA

[size=+6]
C L O S E D​
[/size]​

100_1521.jpg

100_1522.jpg


Hi folks,
Here is 3rd run of 4AA in 1D M*g
Finally the brightest 1D rechargeable flashlight is ready to ship.
Body is shortened to 1D and inside bored out to accept 4 AAs of any kind and any capacity. Tail cap is recessed for minimal possible length.
Head is fine finned for better heat dissipation. Completly deanodized, polished and hard anodized in several colors and electroless nickel plated.
Battery holder designed to accept 4AAs (cunsumer or flat top) which are slightly gapped to avoid shortage in case battery cover is torn. It has extended charging jack to recharge when tail cap is removed. You can also recharge the pack out of flashlight or simply remove batteries to recharge individualy. This battery holder has very low resistance and capable of high drain bulbs. Center pin of charging jack is positive and I will include a male charging jack too.
Bulb options: Axial fillament potted 4 volt, 3.5A halogen or potted WA1319
I recommend to use axial 4 volt for maximum brightness or WA1319 for decent run time.
This flashlight comes with stock reflector, lens and krypton bulb. It is highly recommended to use aluminum reflector and boro lens when using high power bulbs.
Using 4 volt axial bulb will out throw stock MC with much nicer beam shape due to it's axial (vertical) short fillament.
You cal also use Terralux drop in LEDs and power them with 3AA battery holder or use Malkoff drop in with 4AA battery holder. Purple one in picture has quad Malkoff and does NOT come with flashlight but give you some idea of possiblities.
Price: 1D M*g without battery holder $80 (NO MORE AVAILABLE)
4AA battery holder $38 (no batteries included) (No More AVAILABLE)
3AA battery holder $34 (no batteries included)
Potted 4 volt halogen axial bulb $12
Bi pin 4 volt halogen axial bulb $10
Potted WA1319 $9
MOP Dual function reflector $25 each
Boro lens $5.50
Shipping $8 for 1 set and $10 for 2 sets in States.
Shipping $14 for international destination.
Paypal: [size=+2]DO NOT PAY[/size]
Please PM for alternate payment method.
Please pick next available and valid number, post your order here followed by Paypal and indicate detail of your order and your CPF handle in Paypal.
I will never figure out what your payment is for and from whom.
[size=+2]DO NOT PAY FOR UNAVAILABLE ITEMS.[/size]
Example: :paypal: for Red#33 M*g 1D

----------------------
#1 Red HA 1D M*g $80 gswitter paid shipped
#2 Red HA 1D M*g $80 EvilLithiumMan paid shipped
#3 Red HA 1D M*g $80 jpd paid shipped
#4 Red HA 1D M*g $80 [email protected] paid shipped
#5 Red HA 1D M*g $80 nitere paid shipped
----------------------
#1 Purple HA 1D M*g $80 GLOCK18 paid shipped
#2 Purple HA 1D M*g $80 Nebula paid shipped
#3 Purple HA 1D M*g $80 3rdrock paid shipped
#4 Purple HA 1D M*g $80 Luminous paid shipped
#5 Purple HA 1D M*g $80 JasonH paid shipped
----------------------
#1 Green HA 1D M*g $80 JasonH paid shipped
#2 Green HA 1D M*g $80 JeffN paid shipped
#3 Green HA 1D M*g $80 jaybiz32 paid shipped
#4 Green HA 1D M*g $80 LuxLuthor paid shipped
----------------------
#1 Gold HA 1D M*g $80 GLOCK18 paid shipped
----------------------
#1 Nickel plated 1D M*g $80 sacredsucculent paid shipped
#2 Nickel plated 1D M*g $80 donn_ paid shipped
#3 Nickel plated 1D M*g $80 donn_ paid shipped
#4 Nickel plated 1D M*g $80 kiely23+ paid shipped
#5 Nickel plated 1D M*g $80 JasonH paid shipped
#6 Nickel plated 1D M*g $80 nitere paid shipped
#7 Nickel plated 1D M*g $80 acourvil paid shipped
#8 Nickel plated 1D M*g $80 X_Marine paid shipped
#9 Nickel plated 1D M*g $80 9x23 paid shipped
#10 Nickel plated 1D M*g $80 GLOCK18 paid shipped
#11 Nickel plated 1D M*g $80 beetleguise paid shipped
#12 Nickel plated 1D M*g $80 katsyonak paid shipped
#14 Nickel plated 1D M*g $80 ideefixe paid shipped
#15 Nickel plated 1D M*g $80 gsnorm paid shipped
----------------------
Any comment welcome.
 
Last edited:

gswitter

Flashlight Enthusiast
Joined
Apr 26, 2006
Messages
2,586
Location
California
PayPal sent for:
- #1 Red HA 1D M*g: $80
- 4AA battery holder: $38
- Shipping to States: $8

Total: $126
 
Last edited:

Sway

Flashlight Enthusiast
Joined
Aug 25, 2003
Messages
1,721
Location
North Carolina
FiveMega,

Can I order just a 4AA battery holder only, no light?

I could use a few:)

Later
Kelly
 

stitch_paradox

Enlightened
Joined
Sep 14, 2007
Messages
581
Location
S.D.CA
Hi Fivemega,
Will this work with any 1D mag? I already have one and this is just what I need. If so I'll take one.

Stitch
 

GLOCK18

Enlightened
Joined
Jan 31, 2008
Messages
926
Location
San Diego,Ca
Is then 1D 4AA M*g By FIVEMEGA shorter the the 1D 3AA M*g By FIVEMEGA I measured mine and its 74mm at it longest point. Is there anyway to charge 4 14500 Lio-Ion cell in the holder, I have a BC but dont think it will charge these cells.
 

fivemega

Flashlight Enthusiast
Joined
Jan 28, 2003
Messages
5,522
Location
California
Is then 1D 4AA M*g By FIVEMEGA shorter the the 1D 3AA M*g By FIVEMEGA I measured mine and its 74mm at it longest point. Is there anyway to charge 4 14500 Lio-Ion cell in the holder, I have a BC but dont think it will charge these cells.

3AA and 4AA to 1D battery holders are same length. 3AA will fit in bored and unbored bodies but 4AA will only fit in bored out bodies.
Charging tower and nipple are excluded from my measurement.
Possible to use 4x14500 (14.8 volt) batteries and if your charger is capable, recharge them in series.
 
Last edited:

fivemega

Flashlight Enthusiast
Joined
Jan 28, 2003
Messages
5,522
Location
California
Just wanted to know how does the 1D mag with potted Halogen Axial will fair up against your 3x18500 EO13L? I just received the red one I bought from you and its pretty bright at 700lm.

These 1D flashlights might not be as bright as 3x18500 but advantage of these flashlight are:
1- possiblity of using Eneloopes
2- Possiblity of using several different bulbs or LEDs
3- Possiblity of using SMO, LOP, MOP and...
4- Possiblity of using 2" reflector, 2" deep reflector, 2.5", 3" and...

----------------------
Don't suppose you have any in just plain black?
Sorry, no black.
 

JeffN

Enlightened
Joined
May 13, 2006
Messages
258
Location
Everybody's Hometown
#2 Green HA 1D M*g $80.00
4AA battery holder $38.00
Potted 4 volt halogen axial bulb $12
MOP Dual function reflector $25 each
Boro lens $5.50
Shipping $8 for 1 set

$168.50 total

:paypal:

Thank you!
 
Status
Not open for further replies.
Top