Battery Junction - Olight
Page 1 of 2 12 LastLast
Results 1 to 30 of 52

Thread: 4x14670 M*g 1D by Fivemega

  1. #1
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,419

    Default (CLOSED)4x14670 M*g 1D by Fivemega

    C L O S E D




    Please read completly before ordering.
    All flashlights are already machined and refinished in limited quantity.
    I do NOT make, modify or anodize per request.


    Hi folks,
    Here is another short M*gs in hard anodized or nickel plated 1.25D M*g similar to 4AA in 1D M*g but little longer and designed for 4x14670 lithium ion batteries for 7.4 volt or 14.8 volt operation.
    Body is shortened to 1.25D and bored out to accept 4 li-ion 14670 accross and head is fine finned for better heat dissipation. Completly deanodized, highly polished and hard anodized in gold color, red color, purple color or nickel plated.
    Battery holder designed to accept 4 li-ion batteries which are slightly gapped to avoid shortage in case battery cover is torn. It has charging jack to recharge batteries without removing batteries from holder or simply remove batteries to recharge individualy. This battery holder has very low resistance and capable of high drain bulbs. Center pin of charging jack is positive and I will include a male charging jack too.
    I highly recommend using this charger for quick, safe and easy recharge system without removing batteries.
    I offer two different type of battery holders for different use. White serial (14.8V, 1100mAh) or black 2S/2P (7.4V, 2200mAh). You can get either one or both types in any quantity.
    You can use WA1111 or ROP LOW with black battery holder or WA1132 with white battery holder.
    Moders also can use these as multi LED host.
    This flashlight comes with stock switch, reflector and lens. It is highly recommended to use aluminum reflector and boro lens when using high power bulbs.
    Please pick next available color and valid number, post your order here followed by Paypal and indicate detail of your order and your CPF handle in Paypal.
    For ducumentation purpose, it is extremely necessary and important to mention your CPF ID handle and detail of items in paypal note.
    I will never figure out who you are and what for you pay without above information. PM will NOT work. So, please don't forget.
    Example:
    for #38 HA Red 1.25D $80
    Black (7.4V) battery holder $40
    --------------------------
    Price: 1.25D M*g without battery holder $80
    White 14.8V battery holder $40 each
    Black 7.4V battery holder $40 each
    Potted WA1132 $10 each
    Bi pin WA1111 $9 each
    ROP bulbs $10 pack of LOW and HI
    SS bi pin holder $17 each
    Brass bi pin holder $14 each
    Dual function reflector $25 each
    Boro lens $5.50 each
    Shipping $8 for 1 set or $10 for 2 sets in States.
    Shipping $14 for 1 set international destination.
    Paypal: DO NOT PAY
    Please PM for different type of payment.
    Expect 3 weeks to receive in States or 6 weeks internationally.
    Please pick next available color and valid number, post your order here followed by Paypal and indicate detail of your order and your CPF handle in Paypal.
    For ducumentation purpose, it is extremely necessary and important to mention your CPF ID handle and detail of items in paypal note.
    I will never figure out who you are and what for you pay without above information.

    Example:
    for #38 HA Red 1.25D $80
    Black (7.4V) battery holder $40
    ---------------------
    #1 Red HA 1.25D M*g $80 ledaholic paid shipped
    #2 Red HA 1.25D M*g $80 LuxLuthor paid shipped
    #3 Red HA 1.25D M*g $80 JasonH paid shipped
    #4 Red HA 1.25D M*g $80 gsnorm paid shipped
    #5 Red HA 1.25D M*g $80 StefanFS paid shipped
    #6 Red HA 1.25D M*g $80 Icarus paid shipped
    #7 Red HA 1.25D M*g (flutted head) $80 LED Zeppelin paid shipped
    #8 Red HA 1.25D M*g (flutted head) $80 LED Zeppelin paid shipped
    #9 Red HA 1.25D M*g (flutted head) $80 ifixvws paid shipped
    #10 Red HA 1.25D M*g (flutted head) $80 sunshine57 paid shipped
    #11 Red HA 1.25D M*g $70 (blemished body) tgiffor paid shipped
    ---------------------
    #1 Purple HA 1.25D M*g $80 LuxLuthor paid shipped
    #2 Purple HA 1.25D M*g $80 JasonH paid shipped
    #3 Purple HA 1.25D M*g $80 3rdrock paid shipped
    ---------------------
    #1 Green HA 1.25D M*g $80 Nebula paid shipped
    #2 Green HA 1.25D M*g $80 JasonH paid shipped
    #3 Green HA 1.25D M*g $80 JeffN paid shipped
    #4 Green HA 1.25D M*g $80 jefft paid shipped
    ---------------------
    #1 Gold HA 1.25D M*g $80 missionaryman paid shipped
    #2 Gold HA 1.25D M*g $80 Kurni paid shipped
    #3 Gold HA 1.25D M*g $80 sunshine57 paid shipped
    #4 Gold HA 1.25D M*g $80 LED Zeppelin paid shipped
    ---------------------
    #1 Nickel plated 1.25D M*g $80 NetKidz paid shipped
    #2 Nickel plated 1.25D M*g $80 Norm paid shipped
    #3 Nickel plated 1.25D M*g $80 thomashct paid shipped
    #4 Nickel plated 1.25D M*g $80 Chodes paid shipped
    #5 Nickel plated 1.25D M*g $80 donn_ paid shipped
    ---------------------
    #1 Chrome plated 1.25D M*g $95 Chodes paid shipped
    #2 Chrome plated 1.25D M*g $95 X_Marine paid shipped
    ---------------------
    Any comment welcome.
    Last edited by fivemega; 04-09-2009 at 04:05 PM.

  2. #2
    Flashaholic*
    Join Date
    Sep 2006
    Location
    Northern Virginia
    Posts
    993

    Default Re: 4x14670 M*g 1D by Fivemega

    Varooj - I will take #1 Green. PP to follow. Kirk

    Last edited by Nebula; 04-18-2008 at 08:33 PM.
    "If it's a penny for your thoughts and you put in your two cents worth, then someone, somewhere is making a penny." ~ Steven Wright.

  3. #3
    Flashaholic*
    Join Date
    Jun 2006
    Location
    Taiwan
    Posts
    569

    Default Re: 4x14670 M*g 1D by Fivemega

    I'll take:

    #1 Nickel plated 1.25D M*g $80
    White 14.8V battery holder $40
    with international shipping $14
    Total $134

    Will PP later.

    Thanks.


    EDIT:
    Last edited by NetKidz; 04-18-2008 at 07:39 PM.

  4. #4
    Flashaholic* AlexGT's Avatar
    Join Date
    Jan 2001
    Location
    Houston, Texas
    Posts
    3,639

    Default Re: 4x14670 M*g 1D by Fivemega

    .
    Last edited by AlexGT; 04-20-2008 at 08:49 PM.

  5. #5
    *Flashaholic* LuxLuthor's Avatar
    Join Date
    Nov 2005
    Location
    CT
    Posts
    10,274

    Default Re: 4x14670 M*g 1D by Fivemega

    #2 Red
    #1 Purple
    Shipping $10

    $170

  6. #6
    Flashaholic* GLOCK18's Avatar
    Join Date
    Jan 2008
    Location
    San Diego,Ca
    Posts
    876

    Default Re: 4x14670 M*g 1D by Fivemega

    I believe the batteries are about 17mm longer so the body must be closer to that, is this correct FM

  7. #7
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,419

    Default Re: 4x14670 M*g 1D by Fivemega

    Quote Originally Posted by GLOCK18 View Post
    I believe the batteries are about 17mm longer so the body must be closer to that, is this correct FM

    Body is 22mm longer than this but 47mm shorter than standard 2D M*g.
    Tail cap is unmodified and can accomodate spare bulb.

  8. #8

    Default Re: 4x14670 M*g 1D by Fivemega

    PAYPAL SENT FOR

    #3 Red HA 1.25D M*g $80
    #2 Green HA 1.25D M*g $80
    #2 Purple HA 1.25D M*g $80
    Shipping est. $12

    Total $252

    I want to order some battery holders and bulbs, but not sure what i want yet.
    Please do not ship until I add those to my order.
    If thats OK.
    Want to do some LED research. Do you have any suggestions?

    Also would i be able to run your 14.8v 43 watt carley bulb with the serial 14.8v holder? For about 22 min run time?
    Too bad I'm blind.

  9. #9
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,419

    Default Re: 4x14670 M*g 1D by Fivemega

    Quote Originally Posted by JasonH View Post
    Want to do some LED research. Do you have any suggestions?

    Also would i be able to run your 14.8v 43 watt carley bulb with the serial 14.8v holder? For about 22 min run time?
    This is excellent to use with 7.4 volt battery holder.
    You may need double click to power up 43 watt bulb using 4x14670
    Mentioned bulb is excellent choice to use in 8x14670 flashlights.

  10. #10
    Enlightened gsnorm's Avatar
    Join Date
    Jun 2007
    Location
    U.S.A.
    Posts
    85

    Default Re: 4x14670 M*g 1D by Fivemega

    Hi FM,

    for #4 Red HA 1.25D M*g $80
    Black (7.4V) battery holder $40
    Shipping/States $8

    Total $128

  11. #11
    Flashaholic JeffN's Avatar
    Join Date
    May 2006
    Location
    Back home in Indiana
    Posts
    252

    Default Re: 4x14670 M*g 1D by Fivemega

    I'll take:
    #3 Green HA 1.25D M*g $80

    Have to decide how I want to configure it, then I'll finish the order and send PP, no later than tomorrow. This will be a nice addition to the Green 1D received a couple of weeks ago.

    Thanks, FM.

    Edit: See #17 below for completed order and payment.
    Last edited by JeffN; 04-20-2008 at 09:34 AM.
    Carpe noctem

  12. #12
    Flashaholic 3rdrock's Avatar
    Join Date
    Mar 2008
    Location
    North Florida
    Posts
    264

    Default Re: 4x14670 M*g 1D by Fivemega

    #3 Purple HA 1.25D M*g $80
    Black 7.4V battery holder $40 each
    Shipping $8
    $5.50 for the lens
    total $133.50
    Last edited by 3rdrock; 04-25-2008 at 04:46 AM.

  13. #13
    Flashaholic* GLOCK18's Avatar
    Join Date
    Jan 2008
    Location
    San Diego,Ca
    Posts
    876

    Default Re: 4x14670 M*g 1D by Fivemega

    I use the TerraLUX TLE-300 at 14.8 volts with no issue, I also have the Malkoff quad LED drop in running at 7.4 volts.

    Quote Originally Posted by JasonH View Post
    PAYPAL SENT FOR

    #3 Red HA 1.25D M*g $80
    #2 Green HA 1.25D M*g $80
    #2 Purple HA 1.25D M*g $80
    Shipping est. $12

    Total $252

    I want to order some battery holders and bulbs, but not sure what i want yet.
    Please do not ship until I add those to my order.
    If thats OK.
    Want to do some LED research. Do you have any suggestions?

    Also would i be able to run your 14.8v 43 watt carley bulb with the serial 14.8v holder? For about 22 min run time?
    Last edited by GLOCK18; 04-19-2008 at 07:24 PM.

  14. #14
    Flashaholic
    Join Date
    Aug 2005
    Location
    Cupertino, CA
    Posts
    340

    Default Re: 4x14670 M*g 1D by Fivemega

    Ok, Varooj, I'll come out and play again.
    #4 Green HA 1.25D M*g $80

    PayPal sent for the above and also for (1) black and (1) white battery holder.
    Last edited by jefft; 04-20-2008 at 12:19 AM. Reason: update

  15. #15
    *Flashaholic* LuxLuthor's Avatar
    Join Date
    Nov 2005
    Location
    CT
    Posts
    10,274

    Default Re: 4x14670 M*g 1D by Fivemega

    Quote Originally Posted by LuxLuthor View Post
    #2 Red
    #1 Purple
    Shipping $10

    $170
    Please add 2 x "White 14.8V battery holder $40 each" to my order which is not marked as shipped yet.

    Thanks!


  16. #16
    Super Moderator
    DM51's Avatar
    Join Date
    Oct 2006
    Location
    Borg cube #51
    Posts
    13,341

    Default Re: 4x14670 M*g 1D by Fivemega

    Paypal sent for:

    4x Black (7.4V) battery holders @ $40 = $160
    Intl shipping … $12
    Total … $172

    Thanks!
    Resistance is futile...

  17. #17
    Flashaholic JeffN's Avatar
    Join Date
    May 2006
    Location
    Back home in Indiana
    Posts
    252

    Default Re: 4x14670 M*g 1D by Fivemega

    for:
    #3 Green HA 1.25D M*g $80 JeffN
    Black 7.4V battery holder $40 each
    Boro lens $5.50 each
    Shipping $8 for 1 set... in States

    Total $133.50

    Thank you, FM.
    Carpe noctem

  18. #18
    Flashaholic* StefanFS's Avatar
    Join Date
    Oct 2006
    Location
    Silicon Road 1, Sweden
    Posts
    1,261

    Default Re: 4x14670 M*g 1D by Fivemega

    PP has been sent for:
    CPFname: StefanFS
    #5 Red HA 1.25D M*g $80
    4AA battery holder $38 (no batteries included)
    Shipping $14 for 1 set international destination.
    $132 total.
    The 4AA cell carrier option is intentional.

    Best Regards,
    Stefan
    Last edited by StefanFS; 04-20-2008 at 10:34 AM.

  19. #19

    Default Re: 4x14670 M*g 1D by Fivemega

    I have decided
    PAYPAL SENT FOR

    2x white 14.8v holders $80
    1x black 7.4v holder $40
    1x Potted WA1132 $10

    Total $130

    Please send these with my other order. Post #8

    Thanks, JasonH
    FM and GLOCK18 thanks for suggestions on the LED drop ins.
    Too bad I'm blind.

  20. #20

    Default Re: 4x14670 M*g 1D by Fivemega

    has been sent for:

    CPFname: mash.m / sorry but i forgot the nickname at paypal - markus meel
    one white 4AA 14,8 volt battery holder $40 (no batteries included)
    Shipping $14 for 1 set international destination.
    $54 total.

    thank you!

    markus

  21. #21
    Flashaholic* StefanFS's Avatar
    Join Date
    Oct 2006
    Location
    Silicon Road 1, Sweden
    Posts
    1,261

    Default Re: 4x14670 M*g 1D by Fivemega

    Got it two days ago. Wonderful work!
    Stefan

  22. #22
    Flashaholic 3rdrock's Avatar
    Join Date
    Mar 2008
    Location
    North Florida
    Posts
    264

    Default Re: 4x14670 M*g 1D by Fivemega

    #3 Purple HA 1.25D M*g $80 3rdrock paid shipped

    And received,thanks.

  23. #23
    Flashaholic* ledaholic's Avatar
    Join Date
    Jun 2002
    Location
    Central Tx
    Posts
    535

    Default Re: 4x14670 M*g 1D by Fivemega

    For #1 HA Red. $80.00
    Last edited by ledaholic; 05-02-2008 at 08:49 AM.

  24. #24
    Administrator Norm's Avatar
    Join Date
    Jun 2006
    Location
    Gippsland Australia
    Posts
    8,662

    Default Re: 4x14670 M*g 1D by Fivemega

    #2 Nickel plated 1.25D M*g $80
    Norm

  25. #25
    Flashaholic* missionaryman's Avatar
    Join Date
    Oct 2005
    Location
    Sydney, Australia
    Posts
    955

    Default Re: 4x14670 M*g 1D by Fivemega

    for #1 Gold HA 1.25D M*g $80
    shipping to the land of many dangerous insects $14
    "Let your light shine" - it's the one commandment we all obey...

  26. #26
    Flashaholic* ledaholic's Avatar
    Join Date
    Jun 2002
    Location
    Central Tx
    Posts
    535

    Default Re: 4x14670 M*g 1D by Fivemega

    Got mine today! It's beautiful!
    Thanks

  27. #27

    Default Re: 4x14670 M*g 1D by Fivemega

    got my battery holder yesterday. very good build qualitiy, good package and very fast delivery!

    thank you again,

    markus

  28. #28
    Administrator Norm's Avatar
    Join Date
    Jun 2006
    Location
    Gippsland Australia
    Posts
    8,662

    Default Re: 4x14670 M*g 1D by Fivemega

    Quote Originally Posted by Norm View Post
    #2 Nickel plated 1.25D M*g $80
    Norm
    Received today Thank You Varooj, it's a beautiful light.
    (The post office Gods must have been with me only 7 days to Australia. )
    Norm

  29. #29
    Flashaholic* missionaryman's Avatar
    Join Date
    Oct 2005
    Location
    Sydney, Australia
    Posts
    955

    Default Re: 4x14670 M*g 1D by Fivemega

    got mine today, thanks Varooj - very nicely made light.
    "Let your light shine" - it's the one commandment we all obey...

  30. #30
    Flashaholic thomashct's Avatar
    Join Date
    Apr 2008
    Location
    Australia
    Posts
    122

    Default Re: 4x14670 M*g 1D by Fivemega

    I will like to take:

    #3 Nickel plated 1.25D M*g $80
    Shipping $14 for 1 set international destination.

    $80 + $14 - $5 (shipping charge paid with chrome bezel)

    = $89 .
    Last edited by thomashct; 05-28-2008 at 05:56 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •