***Titanium Aleph & E Series compatible heads/tubes/tails /TnC EDC-Flex Sales***

Bogus1

Flashlight Enthusiast
Joined
Feb 7, 2005
Messages
1,332
Location
Oregon
TnC has an E Series project, the new EDC-Flex Series. We will focus on Ti parts in this thread, but we will also have some aluminum parts as well. These parts have been discussed in our Titanium Aleph & E Series compatible heads/tubes/tails**Announcing TnC Ti EDC-Flex**The first post with details and pricing is listed here, and the general interest list is here on the 12th post. These parts are also available on the TnC Online Store.

The 27mm EDC-Flex Ti heads sell for $265. These 27mm heads do not include LEs or canisters. The $265 is for an empty head with a crenulated bezel. Reflectors and UCL lenses are $30. I have a short supply on hand for both. Reflectors separately are $20 and mineral lenses are $5.

The 20mm EDC-Flex Ti heads sell for $180. These 19mm and 20mm heads do not include LEs or canisters. This price is for an empty head with a crenulated bezel. Reflectors and Sapphire lens pricing is listed just below.

The 19mm EDC-Flex Ti heads sell for $190 with the introductory price which includes a crenulated bezel and o-ring. Unlike other 19mm heads we've seen, Chris designed these so that the lens and reflector are retained in the head and don't fall out evey time you remove the LE (canister). This is especially important when using an AR coated Sapphire lens as these scratch easily. As a service so you don't need to track down the parts needed to complete your heads, McR reflectors without lenses are $18 extra. UCL lenses are $10 extra. Sapphire lenses and McR reflectors are $40 extra.

The Cr123 EDC-Flex tube/tails sell for $225. The available styles are v5-3 and v1 as shown at the bottom of this page along with the availability. Additional tubes not listed in this thread are available online as well from the TnC Online Store. A pocket clip is $15 extra. These tubes can be custom milled to either have no holes for clips etc, holes for a clip, and slots for tritium. Input on this is needed in the immediate future as once the rest are milled it will be too late. These tubes include a McClicky switch, boot and o-ring.

Shipping is $3 First Class CONUS, or $6 Priority CONUS, both with delivery confirmation. International is $6 First Class and $15 Priority Mail. For those on the list please post once you have sent paypal. Please send cash paypal only to bogus1cash AT gmail DOT COM Cash paypal means either from a paypal balance and/or bank account. For Credit Card paypal please send to Bogus1cc AT gmail DOT COM

Below are pictures and drawings of the TnC EDC-Flex 27L (27-L, 27-XR, 27-S) Ti heads. This is version v1 Long. I will list all the long variation candidates v1, v3, v5 and v6 in a row followed by the short versions (McR-27). ***Please see below for 27mm interest list and also for 20mm & 19mm pics and interest list***


Below is the v3 Long 27mm head.



Below is the v5 long.



Below is the v6 Long.



Below is v1 Short 27mm head (McR-27 reflector).



Below is the v3-2 short 27mm head.



Below is the v5 short.



Here are the last drawings for the 27mm Ti EDC-Flex heads for this run. Below is the v6.



Below shows what the heads look like with the smooth bezel (only 2 available) or the Maxlite bezel. The smooth bezels are the same price and the Maxlite bezel can be substituted for an additional $20. These bezels fit all the TnC 27mm heads.



Below is the inventory and interest list for the EDC-Flex 27mm Ti heads.

Available
Inventory-------------Reserved/Paid

(SOLD) V3-2 Short--------jch79 PAID, SpeedPRO PAID
(SOLD) V5 Short-----------blitzlicht65 PAID, starfiretoo PAID, vx000
(SOLD) V6 Short-----------starfiretoo PAID, Candlelet PAID

(SOLD)V1 Long------------donn_ PAID, chipwillis PAID
(1x) V3 Long------------MorpheusT1, dmdrewitt PAID, senorcosas PAID, GRoLED PAID
(SOLD)V5 Long------------starfiretoo PAID, chipwillis PAID
(SOLD) V6 Long------------donn_ 2x UCLs, 2x mineral lenses PAID, Steve_L PAID, Cowley PAID

Below is the 20mm V1 with Crenulated Bezel on the left and V3 with crenulated on the right. ***Please see below for 19mm pics and interest list***



There are few heads not already spoken for. If these don't sell soon I'll post them on our store. If there is enough interest we might build another small run of 19mm & 20mm heads.

V1

1. skcheng PAID
2. tdurand PAID
3. starfiretoo PAID
4. senorcosas PAID
5. donn PAID
6. thom PAID
7. DFiorentino
8.
9.
10.

V3 SOLD OUT. (back-up list for possible second run below)

1. LED Zeppelin PAID
2. dmdrewitt PAID
3. jch79 PAID
4. starfiretoo PAID
5. senorcosas PAID
6. Kenster PAID
7. donn PAID
8. skcheng/lens/reflector PAID
9. Groundhogg66 PAID

back up

skcheng/lens/reflector

We initially built 1 20mm v5 TnC EDC-Flex prototype head for $260. We now have 4 more available for $220 on the TnC Online Store.



1. Griff PAID

I also have a small run of 19mm V1 and V3 heads for sale (using the McR-19XR reflector). Below is a picture of the V1 19mm EDC-Flex Ti E Series compatible head.



Below is a V3 19mm EDC-Flex Ti head.



Please note, more heads are available at this time. We will sell between 15x and 19x total with the most being the V1 variant.

19mm V1

1. Russki PAID
2. alex_in_germany PAID
3. starfiretoo PAID
4. MorpheusT1 PAID
5. omoanya PAID
6. Steve_L PAID
7.
8.
9.
10.
11.
12.

19mm V3 SOLD OUT

1. starfiretoo PAID
2. arewethereyetdad PAID
3. flashlight PAID
4. BigHonu PAID
5. Stevenh (smooth bezel) PAID
6. Cowley PAID
7. arewethereyetdad PAID
8. vx000 PAID

As was mentioned in the thread: Titanium Aleph & E Series compatible heads/tubes/tails**Announcing TnC Ti EDC-Flex** Below is a prototype 19XR head v5. Only 2 were initially built. Another 2 are available on the TnC Online Store.




19mm v5 ($260)

1. starfiretoo PAID
2. billybright PAID

Below are the EDC-Flex Cr123 V1 (top) and v5-3 tubes (bottom). Tubes are not shown with available pocket clips or tritium slots.



Below we see the EDC-Flex v1 tube with both the v1 27mm Long head and the v1 20mm head. All these parts are available at this time.




The picture below depicts the v3 Long EDC-Flex head mated to a v5-3 EDC-Flex Cr123 tube/tail. The second picture down shows the same v3 Long head and the v1 Cr123 tube/tail. These parts are available in very limited quantities.




The combinations shown below are all available at this time.


v6 short head v3 19mm head v1 19mm head v5 short 27mm


v5 short 27mm
with smooth bezel

Please note more of these Cr123 Titanium tubes are available on the TnC Online Store

Cr123 v5-3 w/clips
1. chipwillis PAID
2. dmdrewitt PAID
3. griff PAID

Cr123 v1 w/clips
1. Donn PAID
2. chipwillis PAID
3. dmdrewitt PAID

Cr123 v1 no holes or clips
1. arewethereyetdad PAID

Cr123 v5 no holes or clips
1.

More tubes are available to custom specs for both v1 and v5-3 on the TnC Online Store! Please read post at the top of the page for more info.
 
Last edited:

starfiretoo

Flashlight Enthusiast
Joined
Oct 13, 2006
Messages
1,265
Location
KAUAI
Re: ***Ti 20mm E Series compatible heads/TnC EDC-Flex Sales Thread***

CASH :paypal:
1 only V1 $180
1 only V3 $180
No lens or reflector.
Priority mail. $6
TOTAL:$366
:goodjob: :thanks:
 
Last edited:

senorcosas

Newly Enlightened
Joined
Apr 6, 2006
Messages
166
Location
San Antonio, TX
Re: ***Ti 20mm E Series compatible heads/TnC EDC-Flex Sales Thread***

:paypal:

one - V1 with crenelated bezel = $180
one - McR reflector and Sapphire lens = $40
one - V3 with crenelated bezel = $180
one - McR reflector and Sapphire lens = $40
Priority shipping CONUS = $6
TOTAL = $446

Thanks!
Russell
 

griff

Flashlight Enthusiast
Joined
Mar 22, 2007
Messages
1,917
Location
Kansas
Re: ***Ti 20mm E Series compatible heads/TnC EDC-Flex Sales Thread***

Please put me on the V3 list
Thanks:D
 

MorpheusT1

Flashlight Enthusiast
Joined
Mar 24, 2005
Messages
2,832
Location
Norway
Re: ***Ti 20mm E Series compatible heads/TnC EDC-Flex Sales Thread***

edited---

Thought this was for the 19mm heads.

I`ll wait.
 
Last edited:

Bogus1

Flashlight Enthusiast
Joined
Feb 7, 2005
Messages
1,332
Location
Oregon
Re: ***Ti 20mm E Series compatible heads/TnC EDC-Flex Sales Thread***

Hi guys I'll put you as first back up. Who knows maybe guys will pass. Perhaps I'll send some PMs to shake to tree to see. Probably better than shaking a tree around here, you'd just get a head full of snow. It's been blowing snow all day :eek:oo:
 

tdurand

Enlightened
Joined
Dec 30, 2005
Messages
631
Location
Wisconsin
Re: ***Ti 20mm E Series compatible heads/TnC EDC-Flex Sales Thread***

:paypal: for 1 x 20mm w/sapphire, McR and priority shipping

Thanks
T
 

thom

Enlightened
Joined
Jan 3, 2008
Messages
322
Location
Small Crappy Town in OK
Re: ***Ti 20mm E Series compatible heads/TnC EDC-Flex Sales Thread***

I will take one with the Cren Bez and the UC lens, consider paypal sent. I would like to be on the list for the for a V3 as that would have been my preferance with the flu-pic and K2 or perhaps R2 if it would work. Also I would like to be listed for a Ti 19 if possible.... ( Were do I post that request? )

thanks,
thom
 

dmdrewitt

Flashlight Enthusiast
Joined
Jan 26, 2006
Messages
1,364
Location
England, UK (Great Britain)
Re: ***Ti 20mm E Series compatible heads/TnC EDC-Flex Sales Thread***

Hi Eric

I have sent PP for a V3 head.

1 x V3 Ti 20mm E Series compatible head $180
1 x Sapphire lense and McR reflector $40 extra
International is $6 First Class

Total $226 Cash Paypal

Thank you very much :twothumbs

David :thumbsup:

 

Bogus1

Flashlight Enthusiast
Joined
Feb 7, 2005
Messages
1,332
Location
Oregon
Re: ***Ti 20mm E Series compatible heads/TnC EDC-Flex Sales Thread***

We've discovered the mineral lenses won't work right so I've removed that option until I can source some, so the Sapphire lenses are the only ones I"ll be able to provide until further notice. I think thom is the only one so far who has expressed interest for this.
 

BigHonu

Flashlight Enthusiast
Joined
Apr 1, 2002
Messages
1,242
Location
Honolulu, HI
Re: ***Ti 20mm E Series compatible heads/TnC EDC-Flex Sales Thread***

Are these compatible with the Aleph light engines?

Thanks!
 

Bogus1

Flashlight Enthusiast
Joined
Feb 7, 2005
Messages
1,332
Location
Oregon
Re: ***Ti 20mm E Series compatible heads/TnC EDC-Flex Sales Thread***

Are these compatible with the Aleph light engines?

Thanks!

Yes they are, and when we get caught up on some of these projects we plan to build some canisters ourselves to fit these.
 

BigHonu

Flashlight Enthusiast
Joined
Apr 1, 2002
Messages
1,242
Location
Honolulu, HI
Re: ***Ti 20mm E Series compatible heads/TnC EDC-Flex Sales Thread***

Thanks for the reply!
 

jch79

**Do Not Feed The Vegan**,
Joined
May 2, 2006
Messages
3,661
Location
On the asphalt.
Re: ***Ti 20mm E Series compatible heads/TnC EDC-Flex Sales Thread***

:paypal:
V3 20mm Ti head $180
CONUS Priority Shipping $6

Thanks guys!! :wave:

john
 

kenster

Flashlight Enthusiast
Joined
Nov 6, 2005
Messages
2,095
Location
San Antonio, Texas
Re: ***Ti 20mm E Series compatible heads/TnC EDC-Flex Sales Thread***

:thinking: cats plural but only a single dog is inreach :oops: So.......

:paypal: I mean resent :p

20mm EDC-Flex Ti head - $180

Priority CONSUS - $6

TOTAL Cash PayPal- $186


Thank you! :)
 
Last edited:

donn_

Flashaholic
Joined
Oct 10, 2007
Messages
8,067
Location
Great South Bay, LINY
Re: ***Ti 20mm E Series compatible heads/TnC EDC-Flex Sales Thread***

:paypal:

For 1ea, V1 and V3, with crenelated bezels and reflector/sapphire lens package.

:thanks:
 

starfiretoo

Flashlight Enthusiast
Joined
Oct 13, 2006
Messages
1,265
Location
KAUAI
***Ti 19mm E Series compatible heads/TnC EDC-Flex Sales Thread***

FOR 19mm Head
CASH
:paypal:
1 only V1 - smooth bezel $190
1 only V3 $190
No lens or reflector.
Priority mail. $6
TOTAL:$386
:goodjob: :thanks:
 

flashlight

Flashlight Enthusiast
Joined
Apr 25, 2004
Messages
3,554
Location
Republic of Singapore
Re: ***Ti 19mm & 20mm E Series compatible heads/TnC EDC-Flex Sales Thread***

:paypal:

1) V3 19mm Ti head & crenallated bezel ring - $190
2) Sapphire lens only - $22
3) First Class International shipping - $6

Total $218.

:thanks:
 
Top