***Titanium Aleph & E Series compatible heads/tubes/tails /TnC EDC-Flex Sales***

[Bogus1]

I've added a UCL option to the first post. I should have these to ship in the next couple of days.

[tdurand]

Received mine today. Looks great. Thanks Eric and Chris!
T

[Bogus1]

Hi T,

I'm glad you are pleased.

Donn,

Thanks for posting the pics. It seems the V3 works well on any tube that is narrower than the head, but how does it look on the Pineapple? I'm eager to see the V3 19mm on some parts as well.

As an update the 19mm heads are complete and the bezels will be finished tomorrow. I should be shipping out the 19mm heads this Saturday the 9th or the following Monday. Thanks

[jch79]

Wow.

The V3 20mm head came in, and I LIKE!

Fit and finish some of the best I've ever seen. Nice job Chris & Eric!!

The head design sort of reminds me of an L1 head. I've got it on an AA light right now, and it looks awesome. I'm lovin' this!

john

[starfiretoo]

I rec'd. my 20mm V1 and V3. The V3 is the overall winner in my book.
A chamfer on the LE side to match the chamfer on the tapered side would look good.

[Bogus1]

The 19mm heads are complete and ready for shipping. If you have paid you should receive a shipping email either today or tomorrow. There are still some 20mm and 19mm heads left for those who have yet to post interest. In the near future any heads left unsold will be posted on our TnC Online Store.

We have started building 27mm long and short heads. To express interest in these new heads please post in this Titanium Aleph & E Series compatible heads/tubes/tails**Announcing TnC Ti EDC-Flex**

[skcheng]

Please put me on the list for a V3 20mm head with sapphire crystal, o-ring and reflector. Thanks!!!

[skcheng]

I'll take a V1 with McR reflector, sapphire lens and 1st class shipping. Total of $223.

Thanks!!

sherwin

[billybright]

for V5 19XR Ti EDC-Flex head + International shipping - Thanks

[Bogus1]

As was mentioned when I posted this thread weeks ago if guys don't step up to the plate I'll have to bump them. At this point I have been unable to reach iconoclast.

Therefore there is one v3 20mm head available in the order shown below. So griff if you still want this v3 head please come forward. However I'll make a different offer as well. There is one v5 20mm prototype head available for $260 (without lens/reflector) and I'll make this available as well to any back up parties first in the order posted. These are the same (except different proportion) as the v5 19XR heads (pictured below and listed at the bottom of the 1st post of this thread).

back up
griff
flashlight
thom
skcheng/lens/reflector

[donn_]

If no one stands for the v5 20mm prototype head, I'll take it.

[starfiretoo]

$263 Cash for 19mm V5

[stevevh]

FOR 19mm Head
CASH
1 only V3 19mm EDC-Flex Ti head $190 (Smooth bezel please)
sapphire lens and reflector $40
Priority mail. $6
TOTAL:$236

Thanks!!

PS This will work with the GDUP cree from the sandwich shoppe, right?

[Bogus1]

Hi Stevenh,

Thanks for your order! Yes, this will work with GDuP Cree or other Cree Aleph LEs.

I could ship this today but I don't have a smooth bezel here. I'm not sure we have a spare one built. We only had one request. If you want to wait until Monday I'll try to sort out whether we have a spare or how long it would take to build one. Either way it would mean a delay in shipping. Please let me know. Thanks

[griff]

I'll take the V5 Prototype Head and Pass on the V3 Please
I will arrange PP

[stevevh]

Hi there,

Cren bezel is fine thanks.

Steve

[Bogus1]

Hi Griff,

Thanks!

Hi stevenh,

I'll ship out as soon as I can which looks like Tuesday now. Sorry for the delay.

Since Griff opted for the v5 20mm head that means flashlight you are up next for the last v3 20mm head if you want it.

[flashlight]

Hi Griff,

Thanks!

Hi stevenh,

I'll ship out as soon as I can which looks like Tuesday now. Sorry for the delay.

Since Griff opted for the v5 20mm head that means flashlight you are up next for the last v3 20mm head if you want it.

Thanks. I'll pass.

[Bogus1]

lol, thanks flashlight. Ok thom you are up next for the v3 20mm head if you choose to take it. I'll send an email. thanks

[stevevh]

Hi Griff,

Thanks!

Hi stevenh,

I'll ship out as soon as I can which looks like Tuesday now. Sorry for the delay.

Since Griff opted for the v5 20mm head that means flashlight you are up next for the last v3 20mm head if you want it.

Hey Bogus,

Don't delay shipping for this but if you can do the smooth bezel by Tuesday that will be great otherwise cren. is fine.

Thanks,

Steve

[Bogus1]

Hi Steve,

It would be at least a week delay for the smooth bezel since we'd have to build one. I'll tell you what. I'll ship this out to you tomorrow and if you still want the smooth bezel we can swap down the road. Does that sound reasonable? Thanks

[stevevh]

Hey Bogus,

Thanks, and very nice gesture! If it is not to much hassle, let me know what one will cost and I will just buy it. That way I have a spare and can change the look. No rush....

Steve

[stevevh]

Just received my V3 19mm EDC-Flex Ti head and mated it to a Mclicky and WOW!!! This thing is very nice. Some of the nicest machining I have ever seen. Gonna have to get a few more pieces!!!!

Thanks guys for making this happen!!!!

[Bogus1]

Hi Steve,

We're glad you are pleased.

I'm trying to get some discussion going on some tubes for these heads in the thread below. Also I'll be listing 27mm heads in this thread early next week. It looks like I might only have two of those left available if everyone on the list takes the heads they reserved.

Titanium Aleph & E Series compatible heads/tubes/tails**Announcing TnC Ti EDC-Flex**

[starfiretoo]

Hope to see the heads soon. paypal ready!

[stevevh]

Hi Steve,

We're glad you are pleased.

I'm trying to get some discussion going on some tubes for these heads in the thread below. Also I'll be listing 27mm heads in this thread early next week. It looks like I might only have two of those left available if everyone on the list takes the heads they reserved.

Titanium Aleph & E Series compatible heads/tubes/tails**Announcing TnC Ti EDC-Flex**

I really like these designs. Any chance you could get a few good pictures of a finished light with the 27mm heads+tail together. It would do wonders for guys like me that need to see the final product to push me in the right direction.
I am interested in the tail packs also, as I have too many heads and not enough tails!!! Those new designs look great and are really original.


Steve

[Bogus1]

I really like these designs. Any chance you could get a few good pictures of a finished light with the 27mm heads+tail together. It would do wonders for guys like me that need to see the final product to push me in the right direction.
I am interested in the tail packs also, as I have too many heads and not enough tails!!! Those new designs look great and are really original.


Steve

Hi Steve,

Yes I can get a picture together with both the tubes/heads but by then I think all the 27mm heads might be sold. From the 15 Chris has machined I think only two have not been spoken for now. If/when we do another run however it will help show what a complete light looks like in metal.

[Bogus1]

thom I haven't heard back from you on the last v3 20mm head so it goes to next in line skcheng. If anyone wants to be added to a back up list for more of these to be built please post, but I believe this current v3 run is sold out!

griff I'm shipping your v5 20mm one-off head today. thanks

[skcheng]

V3 20mm head is mine

Thanks Eric!!!

[Bogus1]

Hi guys,

I have the 27mm EDC-Flex Ti heads now available for shipping starting tomorrow (Friday June 6).

Below is a picture of Long heads. On the left is the v6, the second from left is the v3, then the v1 followed on the right by the v5. There are more pictures in the first post of this thread. Pictures of the short heads will be posted later.



Below is the inventory and interest list for the EDC-Flex 27mm Ti heads.

At this time it appears we have (1) extra heads for every design except the v5 long. Please post to reserve any unclaimed heads.

Available
Inventory-------------Reserved/Paid

(SOLD) V3-2 Short--------jch79 PAID, SpeedPRO PAID
(1x) V5 Short-----------blitzlicht65 PAID, starfiretoo PAID
(1x) V6 Short-----------starfiretoo PAID

(1x)V1 Long------------donn_ PAID,
(2x) V3 Long------------MorpheusT1, dmdrewitt PAID, senorcosas PAID, GRoLED PAID
(SOLD)V5 Long------------starfiretoo PAID, chipwillis
(SOLD) V6 Long------------donn_ 2x UCLs, 2x mineral lenses PAID, Steve_L PAID, Cowley PAID


The 27mm EDC-Flex Ti heads sell for $265 with our introductory price. These 27mm heads do not include LEs or canisters. We will sell those separately probably in about a month. The $265 is for an empty head with a crenulated bezel. Reflectors and UCL lenses are $30. I have a short supply on hand for both. Reflectors separately are $20 and mineral lenses are $5. Paypal info. in on the first post. Please post when you have sent paypal. Thanks for your interest.