***Partially updated 2/25/10***
TnC has begun an E Series project, the new EDC-Flex Series. We are providing very small runs of aluminum parts to parallel the Ti parts we are offering as well. These Ti parts (head and tubes/tails) have been discussed in our Titanium Aleph & E Series compatible heads/tubes/tails**Announcing TnC Ti EDC-Flex**The first post with details and pricing (for Ti) is listed here, and the general interest list is here on the 12th post.
The 20mm EDC-Flex bare and NAT anodized aluminum heads sell for $67 and are available now. Only 10x of these 20mm heads have been machined. The 19mm heads will be ready for shipping next week. These 19mm, 20mm, 27mm short, 27mm long, and 38mm heads heads do not include LEs or canisters. We are not selling canisters yet. This price is for an empty head with a crenulated bezel. McR reflectors without lenses are $18 extra. UCLs are $10. Sapphire lenses and McR reflectors are $40 extra. Pictures are below.
The 27mm EDC-Flex NAT anodized heads sell for $99. These 27mm heads do not include LEs or canisters. The $99 is for an empty head with a crenulated bezel. These are one-off one of a kind heads. Reflectors and UCL lenses are $30. I have a short supply on hand for both. Reflectors separately are $20 and mineral lenses (non UCLs) are $5. Pictures are below.
Shipping is $3 First Class CONUS, or $6 Priority CONUS, both with delivery confirmation. International is $6 First Class and $15 Priority Mail. For those on the list please post once you have sent paypal. Please include details in your paypal including CPF name. Please send cash paypal only to catsndog AT inreach DOT COM Cash paypal means either from a paypal balance and/or bank account. For Credit Card paypal please send to Bogus1cc AT earthlink DOT NET
Below is a picture of a V1 EDC-Flex bare aluminum head on the left and a V3 head on the right.
Again but HA NAT anodized.
Below is the sales list for the remaining EDC-Flex aluminum 20mm E Series heads/with crenulated bezels.
V1 20mm
1. bare
2. bare
3. NAT SOLD
4. NAT SOLD
5. NAT SOLD
V3 20mm
1. Bare
2. Bare
3. NAT SOLD
4. NAT SOLD
5. NAT
Below are the pictures of the TnC EDC-Flex 27mm E Series compatible heads. These are all NAT HA. The picture to the left below is of the 27L v5 and to the right is the 27L v3.
Below on the left is the 27L v6 and on the right the 27 short v6. The anodizing on the v6 short has a matte finish.
Below on the left is the v3 short and on the right the v5 short. The v5 short has a matte anodized finish.
1. 27L NAT v3 SALE PENDING
2. 27L NAT v3
3. 27L NAT v5
4. 27L NAT v6 SOLD
5. 27L NAT v6
6. 27 short NAT v3
7. 27 short NAT v5
8. 27 short NAT v6
Below are drawings of the 38mm EDC-Flex heads (without bezel). There are very few reflectors available for these heads. The rest (if these are built) can be purchased as empty heads (including 0-rings and bezels), or with lenses and/or with heat sinks for customs multi LED setups.
We have sourced UCL lenses for these heads that match the lenses to the A3 Aleph specs. so folks can order these lenses as well for use in their existing heads.
For those who want the most in capacity the TnC C-Flex aluminum AW C Li-ion tubes and E Series adaptors are already available on FS *C-Flex* C Li-ion battery Tubes, Extenders & Adaptors for E & C Series, TnC & Bulk and TnC C-Flex on the TnC online store.
EDIT: If there is interest in the future we will build TnC E Series compatible Canisters (LEs). When that happens we will seek input. Folks have asked us to focus our offering so we will start a specific thread just for Canisters in the future.
TnC has begun an E Series project, the new EDC-Flex Series. We are providing very small runs of aluminum parts to parallel the Ti parts we are offering as well. These Ti parts (head and tubes/tails) have been discussed in our Titanium Aleph & E Series compatible heads/tubes/tails**Announcing TnC Ti EDC-Flex**The first post with details and pricing (for Ti) is listed here, and the general interest list is here on the 12th post.
The 20mm EDC-Flex bare and NAT anodized aluminum heads sell for $67 and are available now. Only 10x of these 20mm heads have been machined. The 19mm heads will be ready for shipping next week. These 19mm, 20mm, 27mm short, 27mm long, and 38mm heads heads do not include LEs or canisters. We are not selling canisters yet. This price is for an empty head with a crenulated bezel. McR reflectors without lenses are $18 extra. UCLs are $10. Sapphire lenses and McR reflectors are $40 extra. Pictures are below.
The 27mm EDC-Flex NAT anodized heads sell for $99. These 27mm heads do not include LEs or canisters. The $99 is for an empty head with a crenulated bezel. These are one-off one of a kind heads. Reflectors and UCL lenses are $30. I have a short supply on hand for both. Reflectors separately are $20 and mineral lenses (non UCLs) are $5. Pictures are below.
Shipping is $3 First Class CONUS, or $6 Priority CONUS, both with delivery confirmation. International is $6 First Class and $15 Priority Mail. For those on the list please post once you have sent paypal. Please include details in your paypal including CPF name. Please send cash paypal only to catsndog AT inreach DOT COM Cash paypal means either from a paypal balance and/or bank account. For Credit Card paypal please send to Bogus1cc AT earthlink DOT NET
Below is a picture of a V1 EDC-Flex bare aluminum head on the left and a V3 head on the right.
Again but HA NAT anodized.
Below is the sales list for the remaining EDC-Flex aluminum 20mm E Series heads/with crenulated bezels.
V1 20mm
1. bare
2. bare
3. NAT SOLD
4. NAT SOLD
5. NAT SOLD
V3 20mm
1. Bare
2. Bare
3. NAT SOLD
4. NAT SOLD
5. NAT
Below are the pictures of the TnC EDC-Flex 27mm E Series compatible heads. These are all NAT HA. The picture to the left below is of the 27L v5 and to the right is the 27L v3.
Below on the left is the 27L v6 and on the right the 27 short v6. The anodizing on the v6 short has a matte finish.
Below on the left is the v3 short and on the right the v5 short. The v5 short has a matte anodized finish.
1. 27L NAT v3 SALE PENDING
2. 27L NAT v3
3. 27L NAT v5
4. 27L NAT v6 SOLD
5. 27L NAT v6
6. 27 short NAT v3
7. 27 short NAT v5
8. 27 short NAT v6
Below are drawings of the 38mm EDC-Flex heads (without bezel). There are very few reflectors available for these heads. The rest (if these are built) can be purchased as empty heads (including 0-rings and bezels), or with lenses and/or with heat sinks for customs multi LED setups.
We have sourced UCL lenses for these heads that match the lenses to the A3 Aleph specs. so folks can order these lenses as well for use in their existing heads.
For those who want the most in capacity the TnC C-Flex aluminum AW C Li-ion tubes and E Series adaptors are already available on FS *C-Flex* C Li-ion battery Tubes, Extenders & Adaptors for E & C Series, TnC & Bulk and TnC C-Flex on the TnC online store.
EDIT: If there is interest in the future we will build TnC E Series compatible Canisters (LEs). When that happens we will seek input. Folks have asked us to focus our offering so we will start a specific thread just for Canisters in the future.
Last edited: