Olight
Results 1 to 5 of 5

Thread: Help With Project RGB Wall Washing Fixture

  1. #1

    Thinking Help With Project RGB Wall Washing Fixture

    I have had this idea for a wall washing fixture for some time. I finally now have started looking into designing it.

    I have been doing a lot of research... The more I find the more confused I get. I checked out the welcome mat that was pretty helpful.

    What I am looking to do is have 6 x 1 Watt Red LED's, 6 x 1 Watt Blue LED's and 6 x 1 Watt Green LED's for a total of 18 1 Watt LED's in a 12" enclosure each LED would use a Lense.

    I would like to control it with a Remote Control


    The power would come from a 12Volt 2.2 AH Battery

    I just need an idea of what products (drivers, wiring, resistors) I would need to make this idea a reality. I just cant seam to get this thing rolling.

    I am learning more everyday just not as fast as my ideas lol

    Any help would be greatly appreciated.
    Last edited by nitzer; 07-09-2008 at 06:42 AM.

  2. #2

    Default Re: Help With Project RGB Wall Washing Fixture

    I am also looking at the possibility to have someone build me the LED portion of the unit. If anyone is interested in this please email me at nitzer00@yahoo.com

  3. #3
    Flashaholic
    Join Date
    Mar 2008
    Location
    Burlington, NJ
    Posts
    186

    Default Re: Help With Project RGB Wall Washing Fixture

    Well, I think you could use this for the lens :

    http://www.cutter.com.au/proddetail....=cut718&cat=45

    It says it has good color mixing performance which is what I think you would want. Plus it comes in different angles if you want more of a flood effect...

    You can use their universal board PCB to mount what ever LED's you want or you can buy them already mounted with a set of red, green, and blue Cree LED's...
    http://www.cutter.com.au/proddetail....=cut717&cat=45

  4. #4

    Default Re: Help With Project RGB Wall Washing Fixture

    Thanks for the information

  5. #5
    Flashaholic
    Join Date
    Mar 2008
    Location
    Burlington, NJ
    Posts
    186

    Default Re: Help With Project RGB Wall Washing Fixture

    I found a RGB controller with IR support in the UK:

    http://www.ledverkoop.nl/component/o...,72/Itemid,26/

    They also have a cheaper 1 watt RGB led and lens setup:
    http://www.ledverkoop.nl/component/p...art/Itemid,26/

    I'm sure there are many more options... I found that in a quick search..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •