!!POST YOUR SUREFIRE COLLECTION!! II

[DimeRazorback]

Normally it would be the KT2 for a 9 volt lamp, but that was a KT1 kit I bought.
I was just going to lable it a "KT" but thought it might cause some confusion!

It's running a LF HO-M3T & 2x17500

[Size15's]

I like the balance the SW01 perhaps more so than the SW02 gives the KT TurboHead, especially on a C2/C3 body.

[jamesmtl514]

The centerpiece of my collection.
Armor black cerakoted Surefire M4 with crenelated Millennium turbo head and SW01 fatty. Nailbender Cree XP-G R4 Flux 5B2 Tint 1-lvl reg. drive 4-16v. max


For those that may ask the question, yes that is my kitchen table, yes that is my signature.

[Acid87]

The centerpiece of my collection.
Armor black cerakoted Surefire M4 with crenelated Millennium turbo head and SW01 fatty. Nailbender Cree XP-G R4 Flux 5B2 Tint 1-lvl reg. drive 4-16v. max

For those that may ask the question, yes that is my kitchen table, yes that is my signature.

Can I ask why you signed your table?

[jamesmtl514]

I was kinda hoping that I would find tons of posts either praising my vision of this light, that took me years to finalize or for SF purists to criticize me for desecrating an already beautiful light.
However I will answer your question.
Simple answer, because i believe it looks awesome. It's unique and a conversation starter.

[mikesantor]

Crazy Canadians...

[Monocrom]

I was kinda hoping that I would find tons of posts either praising my vision of this light, that took me years to finalize or for SF purists to criticize me for desecrating an already beautiful light.
However I will answer your question.
Simple answer, because i believe it looks awesome. It's unique and a conversation starter.

Okay, if that's what you truly want . . .

"How could you desecrate such a classic of SureFire design, you narcissistic bum!"

[jamesmtl514]

That's better
I'm still waiting for my cell phone provider to launch a new phone. My previous 2 phones self destructed and I don't have a camera.
Once I do have that new phone in my hands I will bombard you guys with pics of the new ones that found their way to me.

[teach9213]

Another type:
* SF KT01 HA Na
* SF M2 BODY (18mm Bored)
* SF SW01 (McClicky switch )

Another type again:
* GG&G TID for SF M2 bezel
* SF M2 ribbed style bezel HA Na
* SF M2 body (18mm Bored)
* SF SW01 (McClicky switch )

[oliver037361]

My little collection of Surefire

[ejot]

sorry one Leef body and some mods in there, but more or less a SF collection...

[coldpyro311]

Wow, there are some serious collectors out there. I thought I was bad for having four Surefires. I have a KROMA, LX2 Lumamax, C2 LED Centurion and a Saint Minimus.

[Monocrom]

Wow, there are some serious collectors out there. I thought I was bad for having four Surefires. I have a KROMA, LX2 Lumamax, C2 LED Centurion and a Saint Minimus.

Not too shabby at all.

[jake royston]

just have the one at the moment, going to be my "custom"

im on the list for a cryos cooling bezel in natural ha, then maybe an OD green cerakote or re-anodizing.
18650 bored c2, satin steel bezel ring, neutral single mode triple drop in, and triad tailcap with softpress McClicky, and ucl, powered by 2x 18350s, all from oveready!
(red o-ring from shaotech)

[jamesmtl514]

Finally received my new phone with camera. I'm pretty sure I rounded them all up...




E1E-SG
E1E ceracoated tan
E1E ceracoated tan
E1E ceracoated safety orange
3P
3P
E1B
G2
A2L-red
C3
C2 with KT1
M4 with SW01
M6
G2
Saint

[angelofwar]

Nice Collection, James! The E1-SG is especially nice!

[jamesmtl514]

Thanks, I've given it a good home while I'm holding on to it for a friend
One of my tan e1e lights left today to make room for 2 more SF arrivals.

[angelofwar]

Those tan ones' do look sweet...woulda liked to had one to go with my tan G2, if I didn't have to sell it.

[jamesmtl514]

Since I might be 1 of 2 people that can pull off this look(all black), and miiiight be the only one to have it functional, I shall share this with you all.
KT1 with N1, powered by 6v cell. 3P body (had a pristine one, didn't want to remove it from the box for the pic), Cerakoted Armor Black SW01 Fatty.


The above wasn't to toot my own horn ( ok maybe a little) but was intended to revive this thread and see what other creations people can come up with.

[Solscud007]

Another type again:
* GG&G TID for SF M2 bezel
* SF M2 ribbed style bezel HA Na
* SF M2 body (18mm Bored)
* SF SW01 (McClicky switch )

Interesting. I have the exact same setup with my Strider M2-ST. However My GGAZ TID does not have any laser etched markings. Now the SW01 and GGAZ M2 bezel are on my Taurus C2 body.

[Solscud007]

Very nice!!! I need that U2 Porcupine body.

My little collection of Surefire

[oliver037361]

Spotlights of the light spot!!!!!!!!

[Acid87]

Spotlights of the light spot!!!!!!!!

I want the porcupine head it's awesome! Been carrying my U2 today and love it.

[angelofwar]

I don't carry my U2 that often, because it's one of my SHTF lights...but, I agree with you acid, when I do decide to carry the U2, it's awesome...the feel, and "comfort" knowing that I have such a reliable light, with the option of any lgiht setting I want, is just...well...comforting!

[Acid87]

I don't carry my U2 that often, because it's one of my SHTF lights...but, I agree with you acid, when I do decide to carry the U2, it's awesome...the feel, and "comfort" knowing that I have such a reliable light, with the option of any lgiht setting I want, is just...well...comforting!

Yeah it's the ring feature I love. It's easy to use one handed and it's just such a great light. I don't often carry it just because it's a quality light that needs to be cared for so more often than not I use the L1.
Still would love the head of the porcupine.

[tjswarbrick]

Just two:
Vintage (round body, non-lockout tail) 6P with M61W,
and G2z with M61L-HCRI:



- Tom

[angelofwar]

Wow! Ver y nice tom! Really like the Spyder and the old-school 6P!!!

[Solscud007]

Yeah it's the ring feature I love. It's easy to use one handed and it's just such a great light. I don't often carry it just because it's a quality light that needs to be cared for so more often than not I use the L1.
Still would love the head of the porcupine.

I have the Porcupine head. I just need the body. I really lucked out on the Porky head.

oldy but goody.

[tjswarbrick]

Wow! Ver y nice tom! Really like the Spyder and the old-school 6P!!!

Thanks, AOW.
OT - I love the Spydies, and am waiting on a very special one. I'm pairing it with a surefire knockoff with custom selected parts, when it comes in.
The vintage 6P was happy kind of a fluke. Earlier this year, a local retailer had it on the shelf, in a plastic container, with no box. It seems to be bored, but I don't have an 18650 to confirm. They called it a "6P LED" which, obviously, it wasn't. Since it was out of package, they gave a pretty good discount. I keep going back to see if any more show up - none have. Since I have the M61W, I'm thinking of perfecting it with a McClicky. Then it'll be technologically updated old-school, I guess.

[angelofwar]

Warbrick,

It looks like another costco fiasco...some HAD an old 6P...a non-flashaholic...and bought a newer one, and "returned" the older, outdated portions of the light...

As for the spydies, I have a limited edition one that I got for free, FROM spyderco...when I was in Iraq, they had a free drawing for a limited edition Native, and I managed to snag one...tan handle, with "Thank you for your service" on one side, and "Iraq and Afghanistan Veterans" on the other...very nice knife...I'm inclined to buy a "user" native, since these knives are so nice, and very funtional...kinda like SF's...they just have that feel...