Olympia Products
Page 31 of 32 FirstFirst ... 21242526272829303132 LastLast
Results 901 to 930 of 955

Thread: ***** P7 and DHS Heatsink Part 2*****

  1. #901
    Flashaholic* H22A's Avatar
    Join Date
    Sep 2004
    Location
    Thailand
    Posts
    1,451

    Default Re: ***** P7 and DHS Heatsink Part 2*****

    Quote Originally Posted by PapaLumen View Post
    Hi, i received my heatsinks today. Can you let me know the dimensions, i think you may have sent me c's instead of d's.

    I dont have a mag around to try it in the head only one where i can get to the tail. It is quite a bit smaller than the tail internal dimensions.

    Thanks.
    Dimension for "D" is 34.2mm and "C" is 26.2mm. Could you please take a picture and sent it to nongvol1@truemail.co.th If I were to sent you the wrong size I'll send replacement next week. Please make sure your Mag is newer version. Older Mag has larger inside diameter.
    If you have any questions, please contact me at nongvol1@truemail.co.th

  2. #902
    Flashaholic* H22A's Avatar
    Join Date
    Sep 2004
    Location
    Thailand
    Posts
    1,451

    Default Re: ***** P7 and DHS Heatsink Part 2*****

    Quote Originally Posted by jcaimhigher View Post
    H22A,
    I've got a few Cree XR-E on either star or regular pads w/o the drivers. Would I need to remove them from there and have the emitter only in order to use your heatsinks? Also, I haven't read everything, but do you provide the drivers or room on the sink for the drivers to mount?

    Thanks for your time,
    That's correct my heatsinks work with only emitters. I'm sorry I don't have drivers.
    If you have any questions, please contact me at nongvol1@truemail.co.th

  3. #903
    Flashaholic* H22A's Avatar
    Join Date
    Sep 2004
    Location
    Thailand
    Posts
    1,451

    Default Re: ***** P7 and DHS Heatsink Part 2*****

    Shipped.

    - Craig B.
    - Peng L.

    Thanks,
    Setapong

    Next Shipment Sep 13
    If you have any questions, please contact me at nongvol1@truemail.co.th

  4. #904

    Default Re: ***** P7 and DHS Heatsink Part 2*****

    One Bare Aluminum HeatSink for Mag-D body and SSC P7 LED

    $12 Sent

  5. #905

    Default Re: ***** P7 and DHS Heatsink Part 2*****

    if you didnt read his whole first post, he requires a $20 dollar minimum

  6. #906
    Flashaholic* PapaLumen's Avatar
    Join Date
    Apr 2010
    Location
    UK
    Posts
    568

    Default Re: ***** P7 and DHS Heatsink Part 2*****

    Quote Originally Posted by H22A View Post
    Dimension for "D" is 34.2mm and "C" is 26.2mm. Could you please take a picture and sent it to nongvol1@truemail.co.th If I were to sent you the wrong size I'll send replacement next week. Please make sure your Mag is newer version. Older Mag has larger inside diameter.
    Thanks, it was just me being thick, they are fine.

  7. #907

    Default Re: ***** P7 and DHS Heatsink Part 2*****

    Quote Originally Posted by H22A View Post
    Shipped.

    - Craig B.
    - Peng L.

    Thanks,
    Setapong

    Next Shipment Sep 13

    i am waiting, am waiting, am waiting, am waiting. Thanks
    again

  8. #908

    Default Re: ***** P7 and DHS Heatsink Part 2*****

    Payment sent for:
    2 x P7 HAIII D
    Thanks!

  9. #909

    Default Re: ***** P7 and DHS Heatsink Part 2*****

    PayPal sent

    2 x P7 HAIII D

    Thank You!

  10. #910
    Flashaholic* ma_sha1's Avatar
    Join Date
    Jan 2009
    Location
    CT, USA
    Posts
    3,040

    Default Re: ***** P7 and DHS Heatsink Part 2*****



    3 pieces of bare alu. p7 heat sink for mag C
    $26 total
    thanks 7 hope to make it to Monday shipment.

    Also, Could you PM me for pricing or 6 pieces & 10 pieces for P7/Alu/Mag C?
    Do you make heat sink that don't have the two little "feet" on top of the pole? I use it with 14mm board, always have to file off the "feet".

    I can't find your PM, did you have it disabled?

    thanks
    My Mods.. http://www.candlepowerforums.com/vb/...5&postcount=78
    Hobby only, I don't do custom mods as a service, thanks for understanding.

  11. #911

    Default Re: ***** P7 and DHS Heatsink Part 2*****

    for 3 P7 HAIII "C" and registered mail.
    $32 for HAIII
    $2 Registered Mail
    $34 total
    Thanks

  12. #912
    Flashaholic* H22A's Avatar
    Join Date
    Sep 2004
    Location
    Thailand
    Posts
    1,451

    Default Re: ***** P7 and DHS Heatsink Part 2*****

    Quote Originally Posted by ma_sha1 View Post


    3 pieces of bare alu. p7 heat sink for mag C
    $26 total
    thanks 7 hope to make it to Monday shipment.

    Also, Could you PM me for pricing or 6 pieces & 10 pieces for P7/Alu/Mag C?
    Do you make heat sink that don't have the two little "feet" on top of the pole? I use it with 14mm board, always have to file off the "feet".

    I can't find your PM, did you have it disabled?

    thanks
    Your order was shipped today. Please email me at nongvol1@truemail.co.th for price quotation.

    I do not have flat top version but can be done. You may have to wait till I place production order, which should be around the end of this month.
    If you have any questions, please contact me at nongvol1@truemail.co.th

  13. #913
    Flashaholic* H22A's Avatar
    Join Date
    Sep 2004
    Location
    Thailand
    Posts
    1,451

    Default Re: ***** P7 and DHS Heatsink Part 2*****

    Shipped

    - ma_sha1
    - morelightnow
    - BrownDog52469
    - Albert W.
    - crunchie
    - spoke2570

    Thanks
    Setapong

    Next Shipment Sep 20
    If you have any questions, please contact me at nongvol1@truemail.co.th

  14. #914
    Flashaholic
    Join Date
    Feb 2010
    Location
    Pennsylvania, USA
    Posts
    173

    Default Re: ***** P7 and DHS Heatsink Part 2*****

    I've never purchased with paypal before, under send money do I choose Personal or purchase. If it's personal do I do gift,payment owed, etc.
    Where do I add the 4%,any advice is appreciated
    Thanks

  15. #915
    Flashaholic
    Join Date
    Feb 2010
    Location
    Pennsylvania, USA
    Posts
    173

    Default Re: ***** P7 and DHS Heatsink Part 2*****

    PP sent for 2x P7 HA III D heatsinks plus registered mail total $27.04, thanks.

  16. #916
    Flashaholic* H22A's Avatar
    Join Date
    Sep 2004
    Location
    Thailand
    Posts
    1,451

    Default Re: ***** P7 and DHS Heatsink Part 2*****

    Shipped.

    - Sled207
    - Lolaralph

    Thanks,
    Setapong

    Next Shipment Sep 28
    If you have any questions, please contact me at nongvol1@truemail.co.th

  17. #917
    Flashaholic* ma_sha1's Avatar
    Join Date
    Jan 2009
    Location
    CT, USA
    Posts
    3,040

    Default Re: ***** P7 and DHS Heatsink Part 2*****

    H22a,

    I have good news & bad news. the good news is that I got the shipment;
    the bad news is that they are the wrong heat sinks. All three are mag D sinks not Mag C sinks I ordered.
    I still have a Mag HAIII D sinks from you & haven't used it. Really have no need for more.

    But I do need the three p7 C sinks, What do I do now?




    Quote Originally Posted by ma_sha1 View Post


    3 pieces of bare alu. p7 heat sink for mag C
    $26 total
    thanks 7 hope to make it to Monday shipment.

    Also, Could you PM me for pricing or 6 pieces & 10 pieces for P7/Alu/Mag C?
    Do you make heat sink that don't have the two little "feet" on top of the pole? I use it with 14mm board, always have to file off the "feet".

    I can't find your PM, did you have it disabled?

    thanks
    My Mods.. http://www.candlepowerforums.com/vb/...5&postcount=78
    Hobby only, I don't do custom mods as a service, thanks for understanding.

  18. #918

    Default Re: ***** P7 and DHS Heatsink Part 2*****

    For 3 X P7HAIII D $34 total with registered mail.

    Thanks,
    Justin

  19. #919
    Flashaholic* H22A's Avatar
    Join Date
    Sep 2004
    Location
    Thailand
    Posts
    1,451

    Default Re: ***** P7 and DHS Heatsink Part 2*****

    Quote Originally Posted by ma_sha1 View Post
    H22a,

    I have good news & bad news. the good news is that I got the shipment;
    the bad news is that they are the wrong heat sinks. All three are mag D sinks not Mag C sinks I ordered.
    I still have a Mag HAIII D sinks from you & haven't used it. Really have no need for more.

    But I do need the three p7 C sinks, What do I do now?

    I'm sorry for the mistake. Could you please ship it back to me I'll pay for the shipping cost. I'll send replacement on the next shipment. Again, I'm sorry for the trouble.
    If you have any questions, please contact me at nongvol1@truemail.co.th

  20. #920
    Flashaholic* ma_sha1's Avatar
    Join Date
    Jan 2009
    Location
    CT, USA
    Posts
    3,040

    Default Re: ***** P7 and DHS Heatsink Part 2*****

    Quote Originally Posted by H22A View Post
    I'm sorry for the mistake. Could you please ship it back to me I'll pay for the shipping cost. I'll send replacement on the next shipment. Again, I'm sorry for the trouble.
    H22a,

    Thanks for the replacement plan. Would you mind that I sell them on your behalf in to US buyer on CPF & send you the proceeds minus the shipping cost/PP fee to you instead? It might cost you less than ship it back. You will recover the funds minus the shipping cost.

    FYI. I don't ship International. It takes a trip during work days that I don't have time for due to demanding job. For US/PP shipping, the USPS pick-up at my door. Plus, the fund is too small to cover my gas money to make a trip to USPS with my car that does only 16MPG.

    let me know if this plan works for you
    My Mods.. http://www.candlepowerforums.com/vb/...5&postcount=78
    Hobby only, I don't do custom mods as a service, thanks for understanding.

  21. #921
    Flashaholic
    Join Date
    Feb 2008
    Location
    athens ga.
    Posts
    107

    Default Re: ***** P7 and DHS Heatsink Part 2*****

    [QUOTE=ma_sha1;3533631]H22a,

    Thanks for the replacement plan. Would you mind that I sell them on your behalf in to US buyer on CPF & send you the proceeds minus the shipping cost/PP fee to you instead? It might cost you less than ship it back. You will recover the funds minus the shipping cost.

    FYI. I don't ship International. It takes a trip during work days that I don't have time for due to demanding job. For US/PP shipping, the USPS pick-up at my door. Plus, the fund is too small to cover my gas money to make a trip to USPS with my car that does only 16MPG.

    let me know if this plan works for you[/QUOTE If the heatsinks you are going to sell are for the d mag and p7's, I'd be interested... Thanx! email.... forrestfulton3@msn.com
    Last edited by forrest; 09-22-2010 at 03:17 PM.

  22. #922
    Flashaholic* ma_sha1's Avatar
    Join Date
    Jan 2009
    Location
    CT, USA
    Posts
    3,040

    Default Re: ***** P7 and DHS Heatsink Part 2*****

    Forrest,

    Yes, they are D mag P7 heat sink.
    I replied to your PM. You can have 2xP7 heat sink for $18,
    I'll ship to you & transfer the proceeds minus shipping/PP fee to H22a.
    My Mods.. http://www.candlepowerforums.com/vb/...5&postcount=78
    Hobby only, I don't do custom mods as a service, thanks for understanding.

  23. #923
    Flashaholic* ma_sha1's Avatar
    Join Date
    Jan 2009
    Location
    CT, USA
    Posts
    3,040

    Default Re: ***** P7 and DHS Heatsink Part 2*****

    H22a,

    I sold the 3 D sink to Forrest & he was kind to paid extra to cover shipping/pp fee. So you are off the hook, free & clear.

    I sent you another $26 to cover the Monday shipment:

    to cover 3 pieces of bare alu. P7 heat sink for mag C

    $26 total, Please make it with Monday shipment.


    Thanks
    My Mods.. http://www.candlepowerforums.com/vb/...5&postcount=78
    Hobby only, I don't do custom mods as a service, thanks for understanding.

  24. #924

    Default Re: ***** P7 and DHS Heatsink Part 2*****

    Order for:

    3 X P7 HAIII D-size

    Registered Airmail

    Total $34.00 US

    Paypal sent, Thanks!!!

  25. #925
    Flashaholic* H22A's Avatar
    Join Date
    Sep 2004
    Location
    Thailand
    Posts
    1,451

    Default Re: ***** P7 and DHS Heatsink Part 2*****

    Quote Originally Posted by ma_sha1 View Post
    H22a,

    I sold the 3 D sink to Forrest & he was kind to paid extra to cover shipping/pp fee. So you are off the hook, free & clear.

    I sent you another $26 to cover the Monday shipment:

    to cover 3 pieces of bare alu. P7 heat sink for mag C

    $26 total, Please make it with Monday shipment.


    Thanks
    I'm sorry for late response as I just returned from out of town. Thank you very much for your help.
    If you have any questions, please contact me at nongvol1@truemail.co.th

  26. #926
    Flashaholic* H22A's Avatar
    Join Date
    Sep 2004
    Location
    Thailand
    Posts
    1,451

    Default Re: ***** P7 and DHS Heatsink Part 2*****

    Shipped

    - havnmonkey
    - ma_sha1
    - monty burns

    Thanks,
    Setapong

    Next shipment Oct 4
    If you have any questions, please contact me at nongvol1@truemail.co.th

  27. #927
    Unenlightened
    Join Date
    Sep 2010
    Posts
    1

    Default Re: ***** P7 and DHS Heatsink Part 2*****



    6 anodized P7 HAIII D
    + Registered Mail
    + 4%
    Total 68.56
    From icehawkacka
    Thank You!

  28. #928
    Unenlightened
    Join Date
    Sep 2009
    Location
    Australia
    Posts
    7

    Default Re: ***** P7 and DHS Heatsink Part 2*****

    Hi H22A,
    Send PayPal#3U86292217019612V for
    2xP7 HAIII D size=US$24.00
    Registered mail=US$2.00
    Total=US$26.00
    From CPF: cfive1.
    Please tray to send it tomorow,thank you.

  29. #929
    Enlightened
    Join Date
    Jun 2006
    Location
    Lindenhurst, Illinois
    Posts
    30

    Default Re: ***** P7 and DHS Heatsink Part 2*****



    1 P7 HAIII "C"
    2 P7 HAIII "D"
    With registered mail + 4% .... thanks
    total $ 35.36

  30. #930
    Flashaholic* H22A's Avatar
    Join Date
    Sep 2004
    Location
    Thailand
    Posts
    1,451

    Default Re: ***** P7 and DHS Heatsink Part 2*****

    Shipped

    - icehawkacka
    - cfive-1

    Thanks,
    Setapong

    I'll make another shipment on Oct 8. Please be advised that I'll be on business trip from Oct 10-18 and no shipment that week. Next shipment on Oct 19.
    If you have any questions, please contact me at nongvol1@truemail.co.th

Page 31 of 32 FirstFirst ... 21242526272829303132 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •