***** P7 and DHS Heatsink Part 2*****

[H22A]

Hi, i received my heatsinks today. Can you let me know the dimensions, i think you may have sent me c's instead of d's.

I dont have a mag around to try it in the head only one where i can get to the tail. It is quite a bit smaller than the tail internal dimensions.

Thanks.

Dimension for "D" is 34.2mm and "C" is 26.2mm. Could you please take a picture and sent it to nongvol1@truemail.co.th If I were to sent you the wrong size I'll send replacement next week. Please make sure your Mag is newer version. Older Mag has larger inside diameter.

[H22A]

H22A,
I've got a few Cree XR-E on either star or regular pads w/o the drivers. Would I need to remove them from there and have the emitter only in order to use your heatsinks? Also, I haven't read everything, but do you provide the drivers or room on the sink for the drivers to mount?

Thanks for your time,

That's correct my heatsinks work with only emitters. I'm sorry I don't have drivers.

[H22A]

Shipped.

- Craig B.
- Peng L.

Thanks,
Setapong

Next Shipment Sep 13

[BrownDog52469]

One Bare Aluminum HeatSink for Mag-D body and SSC P7 LED

$12 Sent

[haiyter]

if you didnt read his whole first post, he requires a $20 dollar minimum

[PapaLumen]

Dimension for "D" is 34.2mm and "C" is 26.2mm. Could you please take a picture and sent it to nongvol1@truemail.co.th If I were to sent you the wrong size I'll send replacement next week. Please make sure your Mag is newer version. Older Mag has larger inside diameter.

Thanks, it was just me being thick, they are fine.

[wrxrocks]

Shipped.

- Craig B.
- Peng L.

Thanks,
Setapong

Next Shipment Sep 13

i am waiting, am waiting, am waiting, am waiting. Thanks
again

[crunchie]

Payment sent for:
2 x P7 HAIII D
Thanks!

[spoke2570]

PayPal sent

2 x P7 HAIII D

Thank You!

[ma_sha1]

3 pieces of bare alu. p7 heat sink for mag C
$26 total
thanks 7 hope to make it to Monday shipment.

Also, Could you PM me for pricing or 6 pieces & 10 pieces for P7/Alu/Mag C?
Do you make heat sink that don't have the two little "feet" on top of the pole? I use it with 14mm board, always have to file off the "feet".

I can't find your PM, did you have it disabled?

thanks

[sled207]

for 3 P7 HAIII "C" and registered mail.
$32 for HAIII
$2 Registered Mail
$34 total
Thanks

[H22A]

3 pieces of bare alu. p7 heat sink for mag C
$26 total
thanks 7 hope to make it to Monday shipment.

Also, Could you PM me for pricing or 6 pieces & 10 pieces for P7/Alu/Mag C?
Do you make heat sink that don't have the two little "feet" on top of the pole? I use it with 14mm board, always have to file off the "feet".

I can't find your PM, did you have it disabled?

thanks

Your order was shipped today. Please email me at nongvol1@truemail.co.th for price quotation.

I do not have flat top version but can be done. You may have to wait till I place production order, which should be around the end of this month.

[H22A]

Shipped

- ma_sha1
- morelightnow
- BrownDog52469
- Albert W.
- crunchie
- spoke2570

Thanks
Setapong

Next Shipment Sep 20

[Lolaralph]

I've never purchased with paypal before, under send money do I choose Personal or purchase. If it's personal do I do gift,payment owed, etc.
Where do I add the 4%,any advice is appreciated
Thanks

[Lolaralph]

PP sent for 2x P7 HA III D heatsinks plus registered mail total $27.04, thanks.

[H22A]

Shipped.

- Sled207
- Lolaralph

Thanks,
Setapong

Next Shipment Sep 28

[ma_sha1]

H22a,

I have good news & bad news. the good news is that I got the shipment;
the bad news is that they are the wrong heat sinks. All three are mag D sinks not Mag C sinks I ordered.
I still have a Mag HAIII D sinks from you & haven't used it. Really have no need for more.

But I do need the three p7 C sinks, What do I do now?

3 pieces of bare alu. p7 heat sink for mag C
$26 total
thanks 7 hope to make it to Monday shipment.

Also, Could you PM me for pricing or 6 pieces & 10 pieces for P7/Alu/Mag C?
Do you make heat sink that don't have the two little "feet" on top of the pole? I use it with 14mm board, always have to file off the "feet".

I can't find your PM, did you have it disabled?

thanks

[monty burns]

For 3 X P7HAIII D $34 total with registered mail.

Thanks,
Justin

[H22A]

H22a,

I have good news & bad news. the good news is that I got the shipment;
the bad news is that they are the wrong heat sinks. All three are mag D sinks not Mag C sinks I ordered.
I still have a Mag HAIII D sinks from you & haven't used it. Really have no need for more.

But I do need the three p7 C sinks, What do I do now?

I'm sorry for the mistake. Could you please ship it back to me I'll pay for the shipping cost. I'll send replacement on the next shipment. Again, I'm sorry for the trouble.

[ma_sha1]

I'm sorry for the mistake. Could you please ship it back to me I'll pay for the shipping cost. I'll send replacement on the next shipment. Again, I'm sorry for the trouble.

H22a,

Thanks for the replacement plan. Would you mind that I sell them on your behalf in to US buyer on CPF & send you the proceeds minus the shipping cost/PP fee to you instead? It might cost you less than ship it back. You will recover the funds minus the shipping cost.

FYI. I don't ship International. It takes a trip during work days that I don't have time for due to demanding job. For US/PP shipping, the USPS pick-up at my door. Plus, the fund is too small to cover my gas money to make a trip to USPS with my car that does only 16MPG.

let me know if this plan works for you

[forrest]

[QUOTE=ma_sha1;3533631]H22a,

Thanks for the replacement plan. Would you mind that I sell them on your behalf in to US buyer on CPF & send you the proceeds minus the shipping cost/PP fee to you instead? It might cost you less than ship it back. You will recover the funds minus the shipping cost.

FYI. I don't ship International. It takes a trip during work days that I don't have time for due to demanding job. For US/PP shipping, the USPS pick-up at my door. Plus, the fund is too small to cover my gas money to make a trip to USPS with my car that does only 16MPG.

let me know if this plan works for you[/QUOTE If the heatsinks you are going to sell are for the d mag and p7's, I'd be interested... Thanx! email.... forrestfulton3@msn.com

[ma_sha1]

Forrest,

Yes, they are D mag P7 heat sink.
I replied to your PM. You can have 2xP7 heat sink for $18,
I'll ship to you & transfer the proceeds minus shipping/PP fee to H22a.

[ma_sha1]

H22a,

I sold the 3 D sink to Forrest & he was kind to paid extra to cover shipping/pp fee. So you are off the hook, free & clear.

I sent you another $26 to cover the Monday shipment:

to cover 3 pieces of bare alu. P7 heat sink for mag C

$26 total, Please make it with Monday shipment.


Thanks

[havnmonkey]

Order for:

3 X P7 HAIII D-size

Registered Airmail

Total $34.00 US

Paypal sent, Thanks!!!

[H22A]

H22a,

I sold the 3 D sink to Forrest & he was kind to paid extra to cover shipping/pp fee. So you are off the hook, free & clear.

I sent you another $26 to cover the Monday shipment:

to cover 3 pieces of bare alu. P7 heat sink for mag C

$26 total, Please make it with Monday shipment.


Thanks

I'm sorry for late response as I just returned from out of town. Thank you very much for your help.

[H22A]

Shipped

- havnmonkey
- ma_sha1
- monty burns

Thanks,
Setapong

Next shipment Oct 4

[icehawkacka]

6 anodized P7 HAIII D
+ Registered Mail
+ 4%
Total 68.56
From icehawkacka
Thank You!

[cfive-1]

Hi H22A,
Send PayPal#3U86292217019612V for
2xP7 HAIII D size=US$24.00
Registered mail=US$2.00
Total=US$26.00
From CPF: cfive1.
Please tray to send it tomorow,thank you.

[cdog]

1 P7 HAIII "C"
2 P7 HAIII "D"
With registered mail + 4% .... thanks
total $ 35.36

[H22A]

Shipped

- icehawkacka
- cfive-1

Thanks,
Setapong

I'll make another shipment on Oct 8. Please be advised that I'll be on business trip from Oct 10-18 and no shipment that week. Next shipment on Oct 19.