Unique Titanium
Results 1 to 11 of 11

Thread: Withdrawn.. Aleph/TnC Nickel plated hybrid.

  1. #1
    Flashaholic* Cuso's Avatar
    Join Date
    May 2006
    Location
    Florida
    Posts
    1,730

    Default Withdrawn.. Aleph/TnC Nickel plated hybrid.

    I finally finish building this lightsaber. It sports an Aleph 19 head on a TnC CR123 body and power pack adapter. Titanium bezel. Recessed TnC clicky. Latest Flupic version, Cree R2 WC. The light engine was built by master soldering iron wielder, Datiled of CPF. Needless to say the thing is absurdly bright. Its on par with my KL1/K2TFFC scorcher... Since the light is a hybrid combo to make the light engine properly focus with the Aleph head , an o-ring must be used and that makes the light engine not reach down into the battery, so Im including the battery charging magnet, for the battery to properly reach the LE and make contact. You can also grab a TnC Cree head and wont need to use the o-ring/magnet set-up. The whole thing is Nickel plated. Its in great condition. Some very minor faint scratches, that you may have a hard time finding in the proper light , but I have this thing for little details... Im asking $230 for the set-up Shipped.

    Withdrawn, no interest...







    TRADES WELCOME
    I take Paypal and M.O. . International shipping contact me for a quote. I'm not responsible for USPS , lateness, loss, or mishaps. I strongly recommend insurance for this high dollar item. PM me for questions. Thanks

    This is posted also at FF so Timestamps rule
    Last edited by Cuso; 08-21-2008 at 12:50 AM.

  2. #2
    Flashaholic* gswitter's Avatar
    Join Date
    Apr 2006
    Location
    California
    Posts
    2,581

    Default Re: FS: Aleph/TnC Nickel plated hybrid, Titanium bezel, Flupic , Cree R2 WC

    Very nice!



  3. #3
    Flashaholic* Cuso's Avatar
    Join Date
    May 2006
    Location
    Florida
    Posts
    1,730

    Default Re: FS: Aleph/TnC Nickel plated hybrid, Titanium bezel, Flupic , Cree R2 WC


  4. #4
    Flashaholic* Cuso's Avatar
    Join Date
    May 2006
    Location
    Florida
    Posts
    1,730

    Default Re: FS: Aleph/TnC Nickel plated hybrid, Titanium bezel, Flupic , Cree R2 WC <<PRICE D

    Price drop..

  5. #5
    Flashaholic* Cuso's Avatar
    Join Date
    May 2006
    Location
    Florida
    Posts
    1,730

    Default Re: FS: Aleph/TnC Nickel plated hybrid, Titanium bezel, Flupic , Cree R2 WC <<PRICE D


  6. #6
    Flashaholic* Cuso's Avatar
    Join Date
    May 2006
    Location
    Florida
    Posts
    1,730

    Default Re: FS: Aleph/TnC Nickel plated hybrid, Ti bezel, Flupic , Cree R2 <<PRICE DROP #2>

    Another little drop...

  7. #7
    Flashaholic* Cuso's Avatar
    Join Date
    May 2006
    Location
    Florida
    Posts
    1,730

    Default Re: FS/FT: Aleph/TnC Nickel plated hybrid, Ti bezel, Flupic , Cree R2 <<PRICE DROP #2

    NO interest?? Offers??

  8. #8
    Flashaholic* Cuso's Avatar
    Join Date
    May 2006
    Location
    Florida
    Posts
    1,730

    Default Re: FS/FT: Aleph/TnC Nickel plated hybrid, Ti bezel, Flupic , Cree R2 <<PRICE DROP #2


  9. #9
    Flashaholic* Cuso's Avatar
    Join Date
    May 2006
    Location
    Florida
    Posts
    1,730

    Default Re: FS/FT: Aleph/TnC Nickel plated hybrid, Ti bezel, Flupic , Cree R2 <<PRICE DROP #4

    BUMP with a little drop..

  10. #10
    Flashaholic* Cuso's Avatar
    Join Date
    May 2006
    Location
    Florida
    Posts
    1,730

    Default Re: FS/FT: Aleph/TnC Nickel plated hybrid, Ti bezel, Flupic , <<Final PRICE DROP #5>

    Last edited by Cuso; 08-18-2008 at 11:18 PM.

  11. #11
    Flashaholic* Cuso's Avatar
    Join Date
    May 2006
    Location
    Florida
    Posts
    1,730

    Default Re: FS/FT: Aleph/TnC Nickel plated hybrid, Ti bezel, Flupic.. FURTHER REDUCED

    I was gonna let this one die, but a little project asks for some funds... Don't be shy trades/partial trades and offers are also welcome.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •