Sold/Expired FS: Blue P7 Maglite 3D with driver and modes *price update*

I want to sell my Mag 3D from this thread:
https://www.candlepowerforums.com/posts/2584748&postcount=71

It has a step down driver and a pwm mode controller.
The Mag can run with 2-4 lithium cells in series.

Modes are low,medium and high.

The switch cap is made of transparent silicone and there are two blue leds underneath. When the modes are changed the switch cap will light up in blue. I will include the original black cap so that if you don't like it you can replace the silicone cap.

Furthermore it has an ultraclear lens and an aluminium reflector.

The LED is from photonfanatic and has the CSXOI bin.

The Mag is not new so therefore it has one little scratch at the end of the body. Besides there is a small logo located at the bottom end of the body.

Price: 130€ plus shipping
shipping Germany: 3,90€
shipping Europe: 8.60€
Shipping wordwide: 12.90€

http://www.dhl.de/dhl?tab=1&skin=hi&check=yes&lang=de_DE&xmlFile=3001058

pm me for insureance


Here are some pics:


high resolution links:

http://daoriginal.da.funpic.de/media/1/Image/Maglite P7/bluemag/blue1.jpg
http://daoriginal.da.funpic.de/media/1/Image/Maglite P7/bluemag/blue2.jpg
http://daoriginal.da.funpic.de/media/1/Image/Maglite P7/bluemag/blue3.jpg
http://daoriginal.da.funpic.de/media/1/Image/Maglite P7/bluemag/blue4.jpg

led me know if you want more information or pics.

Re: FS: Blue P7 Maglite 3D with driver and modes

price update

Is this light currently set up to run on 2x18650 like your red Mag P7? That is, does it already have a tube and spring or some tailcap mod to work with 2x18650? Thanks!

i'll take it

@ DocD: pm sent

@ OceanView: For 2x 18650 I'm using a dummy and for 3 the spring can be reverse mounted. That was actually an idea from DocD :wave:

Shipped