T.Rexford
Newly Enlightened
- Joined
- Dec 1, 2006
- Messages
- 33
Hey everybody. This is the load I'll be taking to PKA +- a few blades I haven't taken pics of.
Heres some shots of a few things I'll be taking to Denver.
AOSm2 Recurve. Double Dyed Maple Burl with a Titanium half bolster and dovetailed Carbon Fiber Bolster. Tapered Tang CPM154.
AOSm2 (10.25 inch OAL, 5.25 inch BL, .1875 inch thick, 1.5 inch wide at Ricasso). Black Micarta with Orange G10 half bolster and Orange G10 liners. ss416 pins and Titanium lanyard tube. Tapered Tang. CPM14
Cerberus Prototype. Dimensions for Gen1 models will be 9 inch OAL, 4.25 inch BL, .1875 inch thick, 1.1875 inch width at Ricasso. Shown with Coyote G10 scales and Black G10 dovetailed bolsters. ss416 pins and titanium tube. CPM154.
Cerberus Prototype. Dimensions for Gen1 models will be 9 inch OAL, 4.25 inch BL, .1875 inch thick, 1.1875 inch width at Ricasso. Red Mallee stabalized Burl with Carbon Fiber Liners. CPM154 and stainless / titanium hardware. Tooled leather sheath by Mike Bartol leather.
Godspeed (8 inch OAL, 3.75 inch BL, .1875 inch thick, 1.1875 inch width at Ricasso). Top to Bottom: Black G10 with stainless damascus overlays, Acid etched with Coyote G10 scales, Carbon Fiber bolsters with green micarta. CPM154 with stainless hardware and titanium tube
Resonance (5.5 inch OAL, 2.5 inch BL, .125 inch thick, .937 inch width at Ricasso). Weinand 'Raindrop' stainless damascus (AEBL/304) with stabalized Black Ash Burl overlays. Pocket sheath by Mike Bartol leather.
Resonance (5.5 inch OAL, 2.5 inch BL, .125 inch thick, .937 inch width at Ricasso). Carbon Fiber, Black / Tan G10, and Micrta with Orange G10 liners. CPM154 with stainless hardware and titanium tubes
Have a good weekend and if your in Denver stop on by, its a blast. They have forging demonsrations, alot of unbelievable makers, and a bunch of good guys.
Crown Plaza
15500 East 40th Avenue, Denver Colorado 80239
(I-70 and Chambers Road Exit)
Heres some shots of a few things I'll be taking to Denver.
AOSm2 Recurve. Double Dyed Maple Burl with a Titanium half bolster and dovetailed Carbon Fiber Bolster. Tapered Tang CPM154.
AOSm2 (10.25 inch OAL, 5.25 inch BL, .1875 inch thick, 1.5 inch wide at Ricasso). Black Micarta with Orange G10 half bolster and Orange G10 liners. ss416 pins and Titanium lanyard tube. Tapered Tang. CPM14
Cerberus Prototype. Dimensions for Gen1 models will be 9 inch OAL, 4.25 inch BL, .1875 inch thick, 1.1875 inch width at Ricasso. Shown with Coyote G10 scales and Black G10 dovetailed bolsters. ss416 pins and titanium tube. CPM154.
Cerberus Prototype. Dimensions for Gen1 models will be 9 inch OAL, 4.25 inch BL, .1875 inch thick, 1.1875 inch width at Ricasso. Red Mallee stabalized Burl with Carbon Fiber Liners. CPM154 and stainless / titanium hardware. Tooled leather sheath by Mike Bartol leather.
Godspeed (8 inch OAL, 3.75 inch BL, .1875 inch thick, 1.1875 inch width at Ricasso). Top to Bottom: Black G10 with stainless damascus overlays, Acid etched with Coyote G10 scales, Carbon Fiber bolsters with green micarta. CPM154 with stainless hardware and titanium tube
Resonance (5.5 inch OAL, 2.5 inch BL, .125 inch thick, .937 inch width at Ricasso). Weinand 'Raindrop' stainless damascus (AEBL/304) with stabalized Black Ash Burl overlays. Pocket sheath by Mike Bartol leather.
Resonance (5.5 inch OAL, 2.5 inch BL, .125 inch thick, .937 inch width at Ricasso). Carbon Fiber, Black / Tan G10, and Micrta with Orange G10 liners. CPM154 with stainless hardware and titanium tubes
Have a good weekend and if your in Denver stop on by, its a blast. They have forging demonsrations, alot of unbelievable makers, and a bunch of good guys.
Crown Plaza
15500 East 40th Avenue, Denver Colorado 80239
(I-70 and Chambers Road Exit)
