POB CHARGER
- Thread starter LIGHTSMAD
- Start date
Help Support Candle Power Flashlight Forum
FredM
Enlightened
Post in the B/S/T I bet someone out there will give or sell you one for on the cheap.
Most SLA spotlights have the same wall wart so if you can find any of them they will work OK.
Wait are you in Ireland? Why not use a 220V supply?
Most SLA spotlights have the same wall wart so if you can find any of them they will work OK.
Wait are you in Ireland? Why not use a 220V supply?
FredM
Enlightened
I think it would be best to just find a cheap wall wart that will wirk with the 230V 50Hz supply you need. With shipping and the use of adaptor.
Unless you just find a good deal on B/S/T. Also any output from 500ma to 1250ma will "work" for the POB.
Unless you just find a good deal on B/S/T. Also any output from 500ma to 1250ma will "work" for the POB.
Here ya go:
http://www.batteryspace.com/index.asp?PageAction=VIEWPROD&ProdID=2724
Just solder on the charging port plug connector.
Here is the full category list:
http://www.batteryspace.com/index.asp?PageAction=VIEWCATS&Category=309
http://www.batteryspace.com/index.asp?PageAction=VIEWPROD&ProdID=2724
Just solder on the charging port plug connector.
Here is the full category list:
http://www.batteryspace.com/index.asp?PageAction=VIEWCATS&Category=309
Similar threads
Latest posts
-
-
-
-
-
-
-
More EV fires after salt water flooding
- Latest: steffenebersbacher28
