I have made small 8mm round MCPCB for the Rebel and for the Cree XP-E LEDs. I don't have any XP-E and am looking for one to test I made the MCPCB correctly before putting them online. It doesn't have to be any particular bin code nor the highest flux. I am only looking to solder it onto the MCPCB and verify the footprint is correct.
Here is a picture of the two MCPCBs. They are 1mm thick, 8mm diameter which is the same diameter of the black plastic part of a regular Luxeon LED.
Thanks in advance.
Wayne
Here is a picture of the two MCPCBs. They are 1mm thick, 8mm diameter which is the same diameter of the black plastic part of a regular Luxeon LED.
Thanks in advance.
Wayne