Maxpedition - Knives and Tools
Page 1 of 2 12 LastLast
Results 1 to 30 of 43

Thread: (ALL GONE!) - MILKYSPIT CUSTOMS - E1L & Custom M1 & Boxter TW4

  1. #1
    Flashaholic Fuhgetaboudit's Avatar
    Join Date
    Dec 2007
    Location
    Northern California
    Posts
    435

    Default (ALL GONE!) - MILKYSPIT CUSTOMS - E1L & Custom M1 & Boxter TW4

    PRICES GOUGED - GOTTA MOVE 'EM OUT SALE !!

    The Rules:
    The first unconditional, "I'll take it" posted in the Sale Thread gets it. Payment via Paypal must follow within 24 hours please. No Paypal fees. If you require additional time to pay, then your response is conditional upon my approval of proposed terms.

    Shipping:
    $10.00 in the United States. If you want insurance – it is $3.00 for all items under $300, and $5.00 for all items over $300. Overseas shipping figure about $25.00 – Insurance is extra, if applicable for your destination.



    #1 – SOLD!! - MILKYSPIT KL4 “BOXTER” SSCP4 USWOH w/ Acorn Driver DX867 – 4 levels of Light ….Priced at $265..$235! SOLD!!

    Surefire E1e Executive Elite all in black. Nice and super bright, running about 230 lumens on high down to I think 10 lumens on ultra low. Nice bright white light with great side spill. Works with just about any “E-Series” combination you can throw at it. Never carried, just in the safe. Can run RCR123’s, or a Primary CR123.


    #2 – SOLD MILKYSPIT CUSTOM E1L OUTDOORSMAN ...Priced at $180 ...$145 ...$135 ...SOLD

    I purchased this from “Gimpy00Wang” a while back and here is his sales thread wording…..

    “Up for grabs is my beloved E1L. I had the pleasure of spending an evening with the Milk man a while back and this is one of the several lights he modified for me. This particular E1L is special in that it was not damaged at all during surgery. It's perfect head to tail. So on to the specs:”

    KL1 head w/SSC P4 USWOH, McR-20, UCL, and glowring
    E1L body
    McTC w/McClicky

    The emitter was picked from several for brightness, whiteness, and efficiency. It's a real performer. We profiled this particular light and found it to be most efficient and BRIGHTEST around 6-7V. It will take 9V+. I've been running it on a single RCR123 and LiFePO4 and it's still plenty bright. I've also used primary 123's in a pinch, but they're certainly not as exciting as a RCR123! Feed it 2x123's or 2xRCR123's and you'll have an ear-to-ear smile.

    It easily out throws my ML1 and similar lights. It's brighter than my Kroma milspec. It _really_ is a special little light that's in desperate need of adoption.

    (There is a little dust on the last photo on the tailcaps from the safe.)

    #3 – CUSTOM SUREFIRE M1, KL4 HEAD, SWO1 TAILCAP – UNIQUE! ….Priced at $300 ...$265 ...$250 ...WITHDRAWN FOR THE MOMENT

    This light is built from a Surefire M1 (Infrared) body, a KL4 head and light engine, and a SW01 tailcap. I have always liked the M1 because of its ergonomic ridges, which make it difficult to drop the light, but the M1 builds are somewhat unusual because the M1 is difficult to disassemble and it has to be rethreaded to allow the mounting of the KL4 head. A super light. Tough, short, handy. Takes one rechargeable 123 cell. Will also run on primary, but is not as bright.










    Last edited by Fuhgetaboudit; 11-20-2008 at 03:40 PM. Reason: Sold the Boxter

  2. #2
    Flashaholic Fuhgetaboudit's Avatar
    Join Date
    Dec 2007
    Location
    Northern California
    Posts
    435

    Default Re: MILKYSPIT CUSTOMS - TW4 BOXTER & E1L & M1






  3. #3
    Flashaholic* 04orgZx6r's Avatar
    Join Date
    Mar 2008
    Location
    North of Indy, Indiana
    Posts
    523

    Default Re: MILKYSPIT CUSTOMS - TW4 BOXTER & E1L & M1

    Wow, nice Milkys
    PM sent

  4. #4
    *Flashaholic* toby_pra's Avatar
    Join Date
    Oct 2007
    Location
    Germany
    Posts
    5,422

    Default Re: MILKYSPIT CUSTOMS - TW4 BOXTER & E1L & M1

    PM sent...

  5. #5
    Flashaholic Joseph Milton's Avatar
    Join Date
    Apr 2008
    Location
    Illinois
    Posts
    430

    Default Re: MILKYSPIT CUSTOMS - TW4 BOXTER & E1L & M1

    I'm interested in the SW01 tailcap if the lego gets parted out!

    Joseph

  6. #6
    Flashaholic Fuhgetaboudit's Avatar
    Join Date
    Dec 2007
    Location
    Northern California
    Posts
    435

    Default Re: MILKYSPIT CUSTOMS - TW4 BOXTER & E1L & M1

    Gotcha on that Milton! Don't know if that will happen though, but I gotcha!

    Everything still available. Looking more for CASH, as I have my eye on a new Plasma T.V.

    Thanks all!

  7. #7
    Moderator
    arewethereyetdad's Avatar
    Join Date
    Nov 2003
    Location
    Kansas City, MO
    Posts
    7,639

    Default Re: MILKYSPIT CUSTOMS - TW4 BOXTER & E1L & M1

    Quote Originally Posted by Fuhgetaboudit View Post
    Gotcha on that Milton! Don't know if that will happen though, but I gotcha!

    Everything still available. Looking more for CASH, as I have my eye on a new Plasma T.V.

    Thanks all!

  8. #8

    Default Re: MILKYSPIT CUSTOMS - TW4 BOXTER & E1L & M1

    Can you give me a little more of a frame of reference for the outdoorsman beam? Is the outdoorsman a general purpose beam that's really bright or is this a miniature thrower like the Surefire TIR optic version of the light? The ad compares it to the ML1, but, I have an ML1 and it's not hard to out throw that light.

    Later,
    HB

    #2 – MILKYSPIT CUSTOM E1L OUTDOORSMAN ...Priced at $180

    I purchased this from “Gimpy00Wang” a while back and here is his sales thread wording…..

    “Up for grabs is my beloved E1L. I had the pleasure of spending an evening with the Milk man a while back and this is one of the several lights he modified for me. This particular E1L is special in that it was not damaged at all during surgery. It's perfect head to tail. So on to the specs:”

    KL1 head w/SSC P4 USWOH, McR-20, UCL, and glowring
    E1L body
    McTC w/McClicky

    The emitter was picked from several for brightness, whiteness, and efficiency. It's a real performer. We profiled this particular light and found it to be most efficient and BRIGHTEST around 6-7V. It will take 9V+. I've been running it on a single RCR123 and LiFePO4 and it's still plenty bright. I've also used primary 123's in a pinch, but they're certainly not as exciting as a RCR123! Feed it 2x123's or 2xRCR123's and you'll have an ear-to-ear smile.

    It easily out throws my ML1 and similar lights. It's brighter than my Kroma milspec. It _really_ is a special little light that's in desperate need of adoption.

  9. #9
    Flashaholic Fuhgetaboudit's Avatar
    Join Date
    Dec 2007
    Location
    Northern California
    Posts
    435

    Default Re: MILKYSPIT CUSTOMS - TW4 BOXTER & E1L & M1

    Quote Originally Posted by heckboy View Post
    Can you give me a little more of a frame of reference for the outdoorsman beam? Is the outdoorsman a general purpose beam that's really bright or is this a miniature thrower like the Surefire TIR optic version of the light? The ad compares it to the ML1, but, I have an ML1 and it's not hard to out throw that light.

    Later,
    HB
    That was Gimpy's comparison of the light. Hmmmm, this is sort of subjective in nature as one persons throw is anothers fill/spill.

    I've used the light inside my house in the warehouse and it is a really nice bright light, but not at all a narrow beam or a focused light such as Milky's Creemator with a focused TIR. This light gives a bright center with a nice progressive fill falling out to the sides, which is still bright but gradually less as you get out to 10ft to 14ft. I will add, to get the most out of this creation, use a Rechargeable 123 (RCR123) rather than a primary 123.

    I hope this helps a little, let me know if there is anything else.

  10. #10

    Default Re: MILKYSPIT CUSTOMS - TW4 BOXTER & E1L & M1

    Subjective yes but using some other light as comparison helps frame it.

    How does this beam compare to other common lights, 120P, L1 cree, Ra Twisty, Fenix,...

    Later,
    HB

    Quote Originally Posted by Fuhgetaboudit View Post
    snip
    Hmmmm, this is sort of subjective in nature as one persons throw is anothers fill/spill.
    snip

  11. #11
    Flashaholic Fuhgetaboudit's Avatar
    Join Date
    Dec 2007
    Location
    Northern California
    Posts
    435

    Default Re: MILKYSPIT CUSTOMS - TW4 BOXTER & E1L & M1

    HB,

    I hope this doesn't come across as egotistical and snobbish; as it certainly isn't meant to be, but I do not have any regular lights to judge this by. All my lights are Milky's, Mac's and McGizmo's. Sort of the "3M" of light collecting......

  12. #12
    Unenlightened Zhivago's Avatar
    Join Date
    Oct 2008
    Location
    Rochester, MN
    Posts
    17

    Default Re: MILKYSPIT CUSTOMS - TW4 BOXTER & E1L & M1

    I'll take the Boxter. Hopefully you can PM me PP info. New to forum, and PM status limited. Thanks.

  13. #13
    Flashaholic* JetskiMark's Avatar
    Join Date
    Nov 2006
    Location
    Near Los Angeles, California
    Posts
    567

    Default Re: MILKYSPIT CUSTOMS - TW4 BOXTER & E1L & M1

    Quote Originally Posted by Fuhgetaboudit View Post
    HB,

    I hope this doesn't come across as egotistical and snobbish; as it certainly isn't meant to be, but I do not have any regular lights to judge this by. All my lights are Milky's, Mac's and McGizmo's. Sort of the "3M" of light collecting......
    Great answer and the sign of a serious flashaholic.

    I must resist that Boxter....

    HyperBlitz Beam Shots: One, Two, Three

  14. #14
    Flashaholic Fuhgetaboudit's Avatar
    Join Date
    Dec 2007
    Location
    Northern California
    Posts
    435

    Default Re: MILKYSPIT CUSTOMS - TW4 BOXTER & E1L & M1

    Prices lowered to tempt you more!!!

  15. #15
    gunga's Avatar
    Join Date
    Nov 2006
    Location
    Vancouver, BC, Canada
    Posts
    4,226

    Default Re: MILKYSPIT CUSTOMS - TW4 BOXTER & E1L & M1

    What driver is in the E1L?

    Is it just ths stock driver?

  16. #16
    Moderator
    arewethereyetdad's Avatar
    Join Date
    Nov 2003
    Location
    Kansas City, MO
    Posts
    7,639

    Default Re: MILKYSPIT CUSTOMS - TW4 BOXTER & E1L & M1

    Don't leave out Mr. Bulk, fourth member of the M Club!

  17. #17
    Flashaholic Fuhgetaboudit's Avatar
    Join Date
    Dec 2007
    Location
    Northern California
    Posts
    435

    Default Re: MILKYSPIT CUSTOMS - TW4 BOXTER & E1L & M1

    Zhivqago - it appears that you just joined our forum today. CONGRATS!! ... and welcome. At this time I cannot see where you have a PM contact folder available. email me at

    fuhgetabouditt (at) hotmail (dot) com

    and I'll fix you up.

    Thanks!

  18. #18
    Flashaholic Fuhgetaboudit's Avatar
    Join Date
    Dec 2007
    Location
    Northern California
    Posts
    435

    Default Re: MILKYSPIT CUSTOMS - TW4 BOXTER & E1L & M1

    Gunga,

    I am not at all sure about what the Driver is, as I purchased this from "Gimpy". It is a nice bright S.O.B. though...! It appears stock from the backside, but I just buy these and don't know all that much about the insides.

  19. #19

    Default Re: MILKYSPIT CUSTOMS - TW4 BOXTER & E1L & M1

    3M of light collecting. Interesting choice.

    No worries here, good luck selling!

    Later,
    HB


    Quote Originally Posted by Fuhgetaboudit View Post
    HB,

    I hope this doesn't come across as egotistical and snobbish; as it certainly isn't meant to be, but I do not have any regular lights to judge this by. All my lights are Milky's, Mac's and McGizmo's. Sort of the "3M" of light collecting......

  20. #20
    Flashaholic*
    Join Date
    Nov 2005
    Location
    Chicago
    Posts
    451

    Default Re: MILKYSPIT CUSTOMS - TW4 BOXTER & E1L & M1

    Few questions on boxter,first, is it a clicky type switch? whats the run-time on high?, describe the throw and flood, lastly, is it still available? I assume its the complete light for sale, body and all.

  21. #21
    Flashaholic Fuhgetaboudit's Avatar
    Join Date
    Dec 2007
    Location
    Northern California
    Posts
    435

    Default Re: MILKYSPIT CUSTOMS - TW4 BOXTER & E1L & M1

    Hi Pete,

    Sorry, but the Milky Boxter is now Sold to Andrew!! CONGRATS!!!

  22. #22
    Moderator
    arewethereyetdad's Avatar
    Join Date
    Nov 2003
    Location
    Kansas City, MO
    Posts
    7,639

    Default Re: MILKYSPIT CUSTOMS - TW4 BOXTER & E1L & M1


  23. #23
    Flashaholic curlyfry562's Avatar
    Join Date
    Sep 2007
    Location
    Southern California
    Posts
    315

    Default Re: REDUCED! - MILKYSPIT CUSTOMS - TW4 BOXTER & E1L & Custom M1

    What is the approx. output of the E1L @ 3.6v and 6v. That price drop is really tempting me.
    "There is nothing which can better deserve our patronage than the promotion of science and literature.
    Knowledge is in every country the surest basis of public happiness."

    [George Washington, address to Congress, 8 January, 1790]

  24. #24
    Flashaholic Fuhgetaboudit's Avatar
    Join Date
    Dec 2007
    Location
    Northern California
    Posts
    435

    Default Re: REDUCED! - MILKYSPIT CUSTOMS - TW4 BOXTER & E1L & Custom M1

    Hey Guys,

    I would love to know all the science and calculations of the these lights, but I'm not a wizard... just a collector of things I like. I can tell you that I have held onto this little light for a while as it has been one of the brightest in my stable of lights, even more so than many other Milky's I have had.

    I wish I could tell you more of the outputs and Lumens and all that.... but I simply don't know..... sorry!

  25. #25
    Flashaholic* tx101's Avatar
    Join Date
    May 2008
    Location
    London UK
    Posts
    2,328

    Default Re: REDUCED! - MILKYSPIT CUSTOMS - TW4 BOXTER & E1L & Custom M1

    Guys, these are killer prices ..... grab them NOW.

    Milky lights are made to be used in the real world, not sit on the shelf
    or white wall hunting. You will NOT regret buying a Milky light.

  26. #26
    Flashaholic* griff's Avatar
    Join Date
    Mar 2007
    Location
    Kansas
    Posts
    1,861

    Default Re: REDUCED! - MILKYSPIT CUSTOMS - TW4 BOXTER & E1L & Custom M1

    PM sent on the M1
    Sometimes, when I'm feeling down because nothing seems to be going right, I like to take a home pregnancy test. Then I can say, "Hey, at least I'm not pregnant

  27. #27
    Flashaholic Fuhgetaboudit's Avatar
    Join Date
    Dec 2007
    Location
    Northern California
    Posts
    435

    Default Re: REDUCED! - MILKYSPIT CUSTOMS - TW4 BOXTER & E1L & Custom M1

    PM replied back to Griff - Potential sale of the M1....???

  28. #28
    Flashaholic Joseph Milton's Avatar
    Join Date
    Apr 2008
    Location
    Illinois
    Posts
    430

    Default Re: SLASHED! - MILKYSPIT CUSTOMS - E1L & Custom M1 - TW4 BOXTER(Sold)

    C'mon Griff. Hook me up with the tail if you get the M1!!!

  29. #29
    Flashaholic* griff's Avatar
    Join Date
    Mar 2007
    Location
    Kansas
    Posts
    1,861

    Default Re: SLASHED! - MILKYSPIT CUSTOMS - E1L & Custom M1 - TW4 BOXTER(Sold)

    Quote Originally Posted by Joseph Milton View Post
    C'mon Griff. Hook me up with the tail if you get the M1!!!
    PM sent Fug
    Sometimes, when I'm feeling down because nothing seems to be going right, I like to take a home pregnancy test. Then I can say, "Hey, at least I'm not pregnant

  30. #30
    *Flashaholic* Sgt. LED's Avatar
    Join Date
    Sep 2007
    Location
    Chesapeake, Ohio
    Posts
    7,486

    Default Re: GOUGED! - MILKYSPIT CUSTOMS - E1L & Custom M1(withdrawn)

    Hey I'd take #2 if I had the money!

    My sell off of most of my flashlights has come to a near dead stop sadly.

    I did want to get a nice 1 cell light to hang on to as an EDC.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •