Post your Pelican case setup!

[Meganoggin]

Packing for our camping trip!

[276]

Where are you going ?

[Meganoggin]

Where are you going ?

Wales - it always rains! But it's also nice and dark at night

[jp2515]

Packing for our camping trip!

So what do you keep inside the 2 other Pelican cases? Inquiring minds needs more ideas (and more cases too)

[Kiwi_sg]

My Pelican cases. Nothing too exciting...

[Meganoggin]

So what do you keep inside the 2 other Pelican cases? Inquiring minds needs more ideas (and more cases too)

Just for you! The smaller one is further up the thread - note the space for more gear



By the way - nice set up Kiwi SG

[jp2515]

Just for you! The smaller one is further up the thread - note the space for more gear



By the way - nice set up Kiwi SG

Nice

[Vernon]

Pelican 1200 with my only three Surefires - there's room for one more though...

[Meganoggin]

Pelican 1200 with my only three Surefires - there's room for one more though...

I rekon you can fit 3 in there

[jp2515]

Meganoggin,

Another quick question, did you use the pick n pluck foam? It looks like the lights fit the foam perfectly.

[276]

Looks like th pick n pluck to me, no matter how many times i get a pelican case i can never get that perfect.

[jchoo]

The trick is to not overpluck it. I just got a new 1510NF to use as a carry-on bag for my trip to England. I also got the 1519 organizer with it - I love it!

[toby_pra]

Very nice setup again!

[Meganoggin]

Meganoggin,

Another quick question, did you use the pick n pluck foam? It looks like the lights fit the foam perfectly.

Yep, pick & pluck, as jchoo says, dont take too much out, you can then nestle the item in and the foam will conform to the object.. The best advice I can give is take your time and remove small amounts of foam, then check for fit and remove more if you need to - good luck

[tx101]

Just for you! The smaller one is further up the thread - note the space for more gear



By the way - nice set up Kiwi SG

Wow Meganog, you do like your TLS T5s
Are they all the Q5 SMO reflector versions ? or have you modded them ?
Shame KD dont sell them any more

I think I got one of the last ones before they where taken down from the site

[Meganoggin]

Wow Meganog, you do like your TLS T5s
Are they all the Q5 SMO reflector versions ? or have you modded them ?
Shame KD dont sell them any more

I think I got one of the last ones before they where taken down from the site

From the left we have Q5 with smooth reflector, MC-E with light orange peel reflector , R2 with smooth reflector and finally R2 with light orange peel reflector. They are real versatile aren't they!

[tx101]

From the left we have Q5 with smooth reflector, MC-E with light orange peel reflector , R2 with smooth reflector and finally R2 with light orange peel reflector. They are real versatile aren't they!

I was only able to get a Q5 smooth reflector
I installed a Diamond Dragon but the beam aint pretty ..... it desparately
needs an OP reflector.
If you ever decide to sell one of the OP versions let me know

[Eric242]

My first Pelican cases were yellow (1400, 1500, 1010), black (1120) and orange (1120). After that I bought 4 OD-green 1200 cases from lighthound and finally got to the point I couldn´t stand the boring yellow and so on. So I bought three cans of Krylon Camouflage spray paint (khaki, olive, brown / totally matte) and started painting my 1400 as well as both 1120 and the 1010. Unfortunatelly the khaki was empty very quick (lasted for the 1400 and one 1120). I used the khaki for the complete case and used olive and brown one after another with some leafs to get the camouflage look. I am really pleased how it turned out, at least with the khaki (the 1120 on the right is a little too dark in person).

Now I have to wait a week until the paint gets chip resistant until I can put them to use again. If it holds up good I´ll get two additional khaki cans and will paint my 1500case too.

[Meganoggin]

Very creative Eric

[ARA]

Hey that looks really good, any special painting techniques ??

[Eric242]

First I painted the case completly with khaki. After that I used olive followed by brown. The leafs should not touch the cases and the spray paint should be aimed directly at the branch. Otherwise you´ll have too much darker paint covering the lighter colours and you won´t be able to have new leaf outlines in these parts. I used the brown only very little because it would cover too much of the other colours. I´d say using khaki for the complete case and olive to apply the leaf outline camouflage should be enough after all, you don´t have to buy the brown too.

Since I am not the creative one but only a copycat you could have a look here: http://www.krylon.com/projects/sport...-4wd-sidekick/ That´s where I got the idea from.

Eric

[ARA]

Thank you for explaining and the link

You did a gr8 job, Looks really very good.
cheers

[mkdive]

My almost full 1495......

[toby_pra]

Nice colors Eric...

[angelofwar]

My almost full 1495......

AND YOU'RE JUST NOW FINDING THIS PLACE??? LOL! Nice set-up, and . Some nice SF's in there as well!

[Black Rose]

My almost full 1495......

Nice setup.

Never thought I'd see Dorcy Super 1-watt lights in a Pelican case.
I think they are great little lights...I also have 3 - all modded with SSC P4 U-bin stars.

[angelofwar]

My peli...a 1450 case...

Camcorder, Coast multi-LED, E1L, M6 w/ FM47, SPARE Loaded MB20, Loaded Spares Carrier w/ spare MN20, and VIP Signal Light

[jp2515]

My peli...a 1450 case...

Camcorder, Coast multi-LED, E1L, M6 w/ FM47, SPARE Loaded MB20, Loaded Spares Carrier w/ spare MN20, and VIP Signal Light

Looks like you are well prepared!

[Vernon]

Milky L1 added to the Pelican...

[276]

New Pelican 1150 case with MD3 & MD4 Wildcat