need help for a PCM to my Li ion

nelson49

Newly Enlightened
Joined
Aug 28, 2008
Messages
22
Location
Denmark
Hi
I need a PCM or PCB :confused: to charger my packed 7.2V 4400 mah
i just got me 4 new Li ion batteries + Li-Ion 3.7-14.8V Charger.
CGR18650
http://www.batteribyen.dk/cgr18650_...9_206&osCsid=6d67d71ce27e8b880ab49ac75e817bef

Universallader til Li-Ion batteripakker på 3.7-14.8V.
http://www.batteribyen.dk/universal...7_272&osCsid=6d67d71ce27e8b880ab49ac75e817bef

I have
Packed in side by side with 2 series and 2 parallel (2S2P) so i have 7.2v 4400 mah

then i read this :
All Li-Ion Battery packs must connect to a protection circuit module to protect Li-Ion Battery from over charge, over discharge and prevent accidental battery explosion due to its extra high energy density. This protection circuit is specially designed for 7.2 V Li-Ion Battery pack made of one Li-ion cells. It also can be use for Polymer Li-Ion battery sold by Batteryspace.
Please connect battery pack with the circuit as the following drawing with wire provided.
Please be advised that this circuit will provide the following protections

Where do i find a PCM or PCB i can buy ind ( EU )or send to ( EU ) so i can use it to my new Li ion battery what PCM or PCB do i need

sorry for my englisk

Mvh Mike



 
Last edited:

nelson49

Newly Enlightened
Joined
Aug 28, 2008
Messages
22
Location
Denmark
Hi jeffosborne
Thx
it is for my dive Torches 1 seoul P7 3,5v i have a Constant Current Power Supply 2800mah

Happy Christmas to you to :)
 
Last edited:

Latest posts

Top